How do I read the expiration date on the container? | Otsuka’s Beverages | Otsuka Pharmaceutical Co., Ltd. (2024)

FAQs

How do you read coded expiration dates? ›

Read letters as though they were assigned to months.

Read the numbers after the letter as the date of the month and the year in which the item was produced. For example, if a code reads “D1519,” that means April 15, 2019. Many products might have a closed code as well as an open-date code.

Expiration dates must be displayed in the format DD-MM-YYYY. If the expiration date is printed in a different format, a sticker with the correct format must be applied, covering the original expiration date.

There's no blanket process for setting expiration dates. Instead, food manufacturers and retailers determine these dates as they see fit. They may take many factors into consideration. They'll think about the characteristics of the particular food as well as its packaging.

Code identifies dates following the W3C profile of ISO 8601, Date and Time Formats, that specifies the pattern: YYYY-MM-DD. If hours, minutes, and seconds are also needed the following pattern is used: YYYY-MM-DDThh:mm:ss.

The batch code consists of 6 digits and utilizes the Julian Date, the last digit of the year of manufacture, the production line, and the production shift. Example: 036521 036 = The thirty sixth day of the year, in this case February 5th.

Ink stamps that are used for marking expiration dates typically consist of a number of bands printed with either numbers or a combination of numbers and letters to represent the date.

If the expiration date is American then the month always comes before the day. If UK then the month always comes after the day.

Cans must exhibit a packing code to enable tracking of the product in interstate commerce. This enables manufacturers to rotate their stock as well as locate their products in the event of a recall. These codes, which appear as a series of letters and/or numbers, might refer to the date or time of manufacture.

This is a 7 digit code you will find on the back of your bag or box to help you identify when it was produced. The first 3 digits tell you on what day of the year the bag or box was produced. The next 2 digits indicate the year, and the final 2 digits are our SunRidge lot number.

How do you read can codes? ›

Note: For month coding, if a number is used, numbers 1 through 9 represent January through September, and letters O for October, N for November and D for December. If letters are used, A=Jan. and L=Dec., unless otherwise noted. Note: For year coding, 8=1998; 9=1999; 0=2000; 1=2001; 2=2002, etc.

BEEP allows you to track expiration dates ubiquitously from your mobile phone. Your time and efforts are precious. Using BEEP, simply scan the barcodes and register expiration dates. BEEP will track it for you.

The date codes are generally in four digit codes. The first two numbers cover the year and the second two are for the week they were manufactured. So the example below shows the four numbers 8332 - made in 1983 in the 32nd week of that year.

Code dates on products do not indicate when food is unsafe to eat. Please refer to these handy guidelines which only apply to UNOPENED FOOD.

The code has two parts with the first 3 digits signifying the day of the year and the last digit signifying the year. Y will be 0 through 9 (0 for 2000, 2010, 2020 for example, and 9 for 2009, 2019, 2029, etc.)

In America, the date is formally written in month/day/year form. Thus, “January 1, 2011” is widely considered to be correct.

A batch number is a designation given to products made in the same manufacturing run. A batch number can consist of numerals, letters, or symbols, and it allows the items to be traced after they've been distributed.

Using batch numbers can simplify the recall process and ensure safety compliance in food products and drugs. Products near their expiry date can be traced through their batch numbers and can be recalled. However, manually tracking batch numbers does require time and labor.

Also referred to as a lot number, lot code, or code number, a product batch code is a combination of numbers and/or letters that are used to identify a set of identical mass-produced products. These shared characteristics may include: Date/time of production. Location of production (Plant Code, Line Number)

What type of label identifies the product's expiration date? ›

These products are required to bear a “Use By” date, up to which the manufacturer has confirmed that the product contains no less than a minimum amount of each nutrient identified on the product label, and that the product will be of an acceptable quality. Date labels are generally not required on packaged foods.

Date and lot codes, batch codes, and expiration dates are required on food and beverage products to identify when and where a product was made. Items are marked with these codes early in the production process for quality control and traceability.

Production date (or manufacture date): It is the date when the product was manufactured. More precisely, it is the date when the batch (or lot) of cosmetics was produced. Expiration date: It is the date when the cosmetic product expires and should not be used.

Expiration dates appear on the front or back of a credit card in a two-digit month/year format. Credit cards expire at the end of the month written on the card. For example, a credit card's expiration date may read as 11/24, which means the card is active through the last day of November 2024.

What does the 'expiry date' mean? The expiry date usually means that you should not take the medicine after the end of the month given. For example, if the expiry date is July 2020, you should not take the medicine after 31 July 2020.

Carbonated soft drinks or sodas are not perishable, and are safe past the date stamped on the container. Eventually flavor and carbonation will decrease. For best quality, consume unopened diet sodas within 3 months after the date expires; regular sodas within 9 months.

The first set of numbers is the canning or packaging date when the aerosol was filled. The next set of numbers is the canning code used by the canner to track their production. The set of numbers following “BC#” is the batch number.

That's our “Best Taste Date.” Nothing expires or goes bad in the product, but we recommend you drink AMP by that date so you get the best flavor.

The ISO recommends writing numeric dates in descending order-year, month, day-with the year written in full.

7 Digit Numbers. 7-digit numbers are those numbers that start from 1000000 and end at 9999999. Do you know how many zeros are there in a million?

What are 7 digit numbers used for? ›

Seven-digit dialing is a telephone dialing procedure customary in some territories of the North American Numbering Plan (NANP) for dialing telephone numbers in the same numbering plan area (NPA). NANP telephone numbers consist of ten digits, of which the leading three are the area code.

In order to decode a barcode, a specific device is required. This device will usually be a barcode scanner, although other devices like RFID sensors or even the camera of a smartphone can be used to decode a barcode. When decoding with a barcode reader, the barcode is hit by a red light coming from the barcode reader.

ANSWER: No, a barcode does not tell you where an item was manufactured.

NeoReader QR & Barcode Scanner App (Free / iOS, Android) NeoReader is one of the fastest barcode scanner apps on the market. In addition to being able to scan and share product info from barcodes and QR codes, NeoReader also offers a nifty QR Code builder inside the app.

The first two digits are the last numbers of the year and the three digits after the hyphen are the day of that year. So, for instance, a Julian date of 21-001 represents the first day of the year 2021, or January 1, 2021, while a Julian date of 22-165 represents the 165^th day of the year 2022 or June 14, 2022.

Short codes are 4-6 digit numbers to which you can send or receive text. They are used for marketing, promotional, verification, and notification alerts by many companies and services.

The 4-Digit Code is a simple, comprehensive, evidence-based method for diagnosing the full spectrum of outcomes observed among individuals with prenatal alcohol exposure.

It represents the number of days elapsed since the beginning of the calendar year. For example, a Julian date of 031 represents January 31st and a Julian date of 365 represents December 31st. ​The Julian date usually represents the date the product was manufactured or packaged.

This number is a three-digit code that represents the consecutive day of the year starting with January 1 as 001 and ending with December 31 as 365. When a "sell-by" date appears on a carton bearing the USDA grade shield, the code date may not exceed 30 days from the date of pack.

Closed Date Codes

They are usually represented by a series of numbers or letters to indicate the date or time of manufacture. They are most useful as a reference when rotating stocks or tracking products in case of a product recall.

What is a coded date? ›

Closed or coded dates are packing numbers used by the manufacturer. They might appear on shelf-stable products such as cans and boxes of food.

Use BEEP for commercial use or at home on any items with a barcode. Scan the barcode, input the expiry date and with the sound of a BEEP, you're all set! Expiration management couldn't be any simpler. Receive a friendly notification reminder a day, week or month prior to the expiry date to preserve your valuable food.

Date labelling on pre-packaged foods

A "best before" date tells you when the "durable life" period ends. Best before date - The "best before" date does not guarantee product safety, but it does give you information about the freshness and potential shelf-life of the unopened food you are buying.

It is a 6 digit number, that can be used to represent a date between 1st January 1900 to 31st Dec 2899. YY stands for the year of that particular century. DDD stands for the day of that particular year of that particular century.