How To Maintain Your Vinyl Banners | Banners.com Resources (2024)

FAQs

How To Maintain Your Vinyl Banners | Banners.com Resources? ›

Avoid folding, as this can cause permanent creases. Also avoid storing the banner in a damp or humid area, as this can cause the vinyl to warp or even mold. Keep the banner away from heat sources, such as radiators or direct sunlight, as this can cause the colors to fade.

To clean vinyl we recommend using a damp soft cloth. Avoid any abrasive cloths or sponges, these can damage the banner. If more cleaning power is needed, use mild soaps, avoid harsh cleaning chemicals that will peel and fade the ink on the banners. Before storing your banner ensure that it's wiped clean then dried.

When your banner is not being used, make sure that you roll it up. Keep the printed side out when you roll the banner to protect the inks. To prevent the banner from bending, store it in the box it was shipped in. You should also keep your banner out of extreme heat.

Typically though, most outdoor printed banners, last for about 3 to 5 years with cut vinyl lettered banners possibility achieving a 7 to 10 year lifespan. Two other factors that will determine how long a banner will last, especially outdoor banners, is proper installation and where the banner is hung.

One of the best ways to clean your vinyl banner is with soap and warm water. Blue Dawn dishsoap is a brand of dishsoap that works very well. Once you wash and rinse your vinyl banner, you'll want to lay it flat in order to dry.

Keep in mind that vinyl naturally has a long lifespan and you can extend it and keep the material looking new by applying ultraviolet ray protection products. UV ray protection helps keep your vinyl from drying out, cracking, and fading. Use a spray that is specially formulated for the marine industry.

Vinyl banners are durable and have a long lifespan, but they need to be stored properly to minimize wrinkles and creases. To ensure the longevity of your banner, follow these tips: Store the banner in a cool and dark area away from direct sunlight or any heat source to prevent fading and damage.

The number 1 way to keep your banner in the best possible shape in-between uses is to roll it up instead of folding it. Rolling will keep it's size down meaning it will take up less room in storage, but more importantly it wont have creases in it next time you go to use it!

As they are essentially made from a form of plastic. As such, the waterproof and weatherproof properties of vinyl banners makes them ideal for outdoor use.

Durable and Reusable

Because of their endurance, you can reuse them anytime you need them again, whether that is in two months, at the end of the year, or the next year. Investing in this type of banner can reduce the marketing costs for your business.

Can a vinyl banner be ironed? ›

You can use an iron to steam the wrinkles out of your vinyl banners but be careful. Vinyl burns easily, so make sure that the iron never comes into direct contact with the surface of your banners. Place the banner—print side down—on a flat surface. Then, set a hot, wet cloth on top of your banner.

Laminating a sign or banner includes printing on the media (usually vinyl,) and then running the media through a large laminator that adheres a clear-coat layer on top of the printed media. Laminating media will increase the durability against the elements by adding the extra coating.

Always pay attention to bleed

Another print blunder people make is forgetting to account for bleed. Banners that have grommets need to be adjusted accordingly. This means going up to a full square inch on all corners, where a normal bleed (without grommets) is typically . 125 inches.

Something like a vinyl banner, for instance, won't burn readily – but if there is an impetus for a high-safety, fire-resistant installation, a specific product may be required.

Yes, vinyl banners can get wet. As most plastics, vinyl is a hydrophobic material or, to put it simply, vinyl repels water. That's why vinyl banners are such an effective outdoor advertising tool.

Sunlight: Exposure to direct sunlight can fade the album covers and deform the vinyl. Keep your record away from windows or areas with excessive sunlight. If you have a space with windows, consider using blackout curtains or UV-protective window film to shield your record.