How To Raise Your Pool's Alkalinity with Baking Soda (2024)

Here’s a secret for pool owners. Some brands of alkalinity increaser have just one active ingredient: sodium bicarbonate. Well, guess what? Sodium bicarbonate is baking soda.

Baking soda raises alkalinity levels in your pool. AND it can be less expensive than Alkalinity Increaser.

Understanding pH Levels and Total Alkalinity in Your Pool

You can either have acidic water or basic pool water. The level of how acidic your pool water is is determined by the pH scale.

The lower the pH level, the more acidic your water will be. Acidic water can cause long-term damage to all your equipment and pool surfaces by eating away at it over time.

The higher the pH level, the more basic your water will be. Basic water can also cause damage by adding a layer of film (or scaling) to your pool parts. Do you know that white, crusty build-up you sometimes see on showerheads? That’s what can happen to your pool and all its equipment.

Here’s a visual of the pH scale. Pool water can be as low as 6 or as high as 8. Your goal is to keep it neutral. Which for a swimming pool is between 7.4 and 7.6.

Now, alkalinity is your pH buffer. But I like to call it pH’s bodyguard. Having the alkalinity of the water between 100 and 150 ppm (parts per million) will help keep a stable pH.

For example, every time it rains or when someone jumps in the pool, that can affect your pH. It can cause it to go up or down dramatically. But alkalinity will take the brunt of the hit before your pH does. And that’s why it’s important to use the right amount of baking soda to keep both your pH and alkalinity levels correct.

How Much Baking Soda Do I Add To My Pool?

As a rule of thumb, use 1.5 pounds (680 grams) of baking soda per 10,000 gallons (37,854 liters) of pool water. This should raise the alkalinity by about 10ppm (parts per million). Or you can use the chart below.

If you’re not sure how much water your pool holds, check out our pool calculator.

Once you know your pool’s volume, and you’ve measured out the baking soda, don’t add it all at once! If you adjust the alkalinity too much in either direction, it can affect the pH as well.

Note: It doesn’t matter which type of baking soda you use. The most popular brand is Arm & Hammer, which is a good choice. Any grocery store brand will do as long as the main and only ingredient is Sodium Bicarbonate.

How to Add Baking Soda to Your Pool

1. Start by adding just 1/2 or 3/4 of the baking soda you’ve measured out. Distribute it in wide arcs across the entire pool. This is called “broadcasting.” Wear chemical-resistant goggles and gloves. And it’s best not to do this on a windy day.
2. Let the baking soda circulate and dissolve for at least six hours. Keep the filtration system running during that time. Then using a liquid test kit or test strips, check both the total alkalinity and pH levels.
3. If the levels are still off, repeat the process. If they’re where they should be, congrats! You just saved money taking care of your swimming pool!

Note: We don’t recommend adding baking soda directly into your skimmer. Adding chemicals through your filter system can be dangerous especially if you have a chlorinator or chemical feeder. It’s actually easier to just add it directly to the water.

If any of this is confusing so far, don’t worry. Pool chemistry can seem overwhelming, but it’s actually really easy if you just have the right education and some tools at your disposal. That’s why we created our own pool maintenance video course to teach you everything you need to know about chemistry, cleaning, and troubleshooting.

Baking Soda Vs. Soda Ash

Baking Soda (Sodium Bicarbonate) is used to raise alkalinity and also slightly raise pH. And Soda Ash (Sodium Carbonate) is used to raise pH and slightly raise alkalinity.

For example, getting a pH reading around 7.2 to 7.6 in 10,000 gallons (37,854 liters) of pool water would take roughly 21 pounds of baking soda. This would also increase the Total Alkalinity by roughly 150 ppm (parts per million). And that’s way too much!

But if we wanted to increase the pH of the pool by 0.5, we could use roughly 12 ounces (340 grams) of soda ash. That would only increase the total alkalinity by roughly 8 ppm.

In other words, use baking soda to increase alkalinity and soda ash to increase pH.

Are There Any Risks With Putting Baking Soda in Your Pool?

While there’s no risk in using baking soda in your pool, there are risks to having high and low alkalinity.

You might notice corrosion in and around your ladders, liner, tiles, or other parts of your pool. This is likely due to low pH and alkalinity for long periods of time.

And if you see scaling or a build-up around your pool equipment, this could be caused by high pH and alkalinity. And it means your water is hard.

All you have to do is keep the alkalinity between 100 and 150 ppm and the pH between 7.4 and 7.6 as often as possible. Test your pool water daily and adjust your chemical levels when needed.

What About Health Risks?

We mentioned getting it in your eye if you add it to your pool on a windy day. That hurts like hell. But besides that, sodium bicarbonate (aka baking soda) is relatively safe.

Sodium bicarbonate has been used for thousands of years. Most notably by Ancient Egyptians who used it to clean their teeth. Just like we do today!

And it’s “Generally Recognized as Safe” by the FDA as a direct food additive.

Think of it this way, if it’s safe enough to use in cakes, then your swimming pool won’t be a problem.

Baking Soda In Pool Water Will Save You Money

The best part about all this is that baking soda is often cheaper than an alkalinity increaser. And you can buy baking soda in bulk just like the pool supply store brand.

On top of that, you can always use any extra baking soda to brush your teeth, make a cake, or clean your dishes.

Happy Swimming!

Need More Pool Maintenance Help?

• Download our free Pool Care Cheat Sheet. It’s a free, easy-to-use guide to help you keep track of taking care of your pool.
• Subscribe to our Swim University YouTube Channel. We publish free video tutorials throughout the pool season.
• Check out our Pool Care Course. You’ll get 30+ step-by-step videos and a downloadable guide with everything you need to know about pool maintenance.