How many feet of garland do I need for a 6-foot tree?
You should also use 10 feet of garland if your tree is very bushy. That means that for a 6-foot tree, you need between 54 and 60 feet of garland depending on the fullness of the tree. For a 7-foot tree, you need between 63 and 70 feet of garland.
Tree Height | Ribbon Length |
---|---|
6.5 feet | 19.5 yards |
7.5 feet | 22.5 yards |
9-10 feet | 27 - 30 yards |
Measure the LENGTH of the banister or the WIDTH of the mantel, then calculate one-and-a-half times that dimension. Example: 6-ft. W mantel x 1.5 = 9 feet of garland.
A 6 foot Christmas tree will need at least 128 pieces, a 7 foot Christmas tree will need at least 196 decorations, and an 8 foot Christmas tree will need a minimum of 212.
Tree Height | Baubles | Beaded Garland or Tinsel |
---|---|---|
6ft 180cm | 100 | 9mts |
7ft 210cm | 125 | 12mts |
7.5ft 225cm | 150 | 18mts |
8ft 240cm | 200 | 22mts |
How to Hang Garlands & Tinsel on a Christmas Tree - YouTube
The first, most important thing you need to do when decorating your Christmas tree, is to always add the lights first β it's more difficult to do this after you've added decorations like baubles and garlands.
For example, a 183cm (6ft) tree needs 574cm of lights (183 x 3.14) or 18ft 9in. But perfection is only obtainable with 37 baubles and 920cm (30ft) of tinsel. 'The formulas took us about two hours to complete,' said formula creators Nicole Wrightham and Alex Craig, both 20.
I find it easiest to work with pieces about three feet long, tuck the top end into the tree near the trunk at the top, tuck the bottom end into the middle of the tree as well, then push the middle of the ribbon in towards the centre of the tree as well, creating two βloopsβ.
Tree Height | Amount of Ribbon |
---|---|
4β² β 5β² | 40 feet β 55 feet |
6β² β 6.5β² | 70 feet β 75 feet |
7β² β 7.5β² | 84 feet β 98 feet |
8β² β 9β² | 120 feet β 150 feet |
How do you decorate a 6ft Christmas tree?
7 Christmas Tree Design Ideas | How to Decorate a Christmas Tree
How to Make A Christmas Tree Look Fuller - YouTube
A rule of thumb is at least nine (9) feet of garland per foot of a tree, so a 7-foot Christmas tree will need sixty-three (63) feet of garland. We recommend buying more garland to be on the safe side. If you are left with any extra, you can always use it on the mantle or wreaths.
Using their 'treegonometry' calculations they say a 152cm (5ft) Christmas tree would need 31 baubles, around 776 cms of tinsel and 478 cms of lights with a 15cm star or angel to top it off.
If you're using tinsel, this is the time to put it on your tree - always before your decorations and ornaments to avoid the tinsel snagging. Tinsel is a simple and easy way to add colour to your tree, but it's best to use it sparingly. You don't need to overload your Christmas tree with it.
Garland: If you want to use garland, make sure to add it before you hang any ornaments. Start at the top of the tree and work your way down.
Be sure to hang some ornaments closer to the trunk to create depth and interest. They reflect the light to make your tree sparkle from the inside. Make the tree yours by adding specialty items, such as handmade ornaments, clip-on ornaments, or icicles. Finish the look with a simple tree topper and a festive tree skirt.
Our golden rule is 100 bulbs or 5 metres of lights per 2ft of Christmas tree. For a 6ft tree we recommend 300 bulbs or 15 metres of lights. If you're a fairy light lover, double up or mix and match styles for extra sparkle.
How to Decorate a Christmas Tree Step by Step! Easy & thrifty tips!
Starting at the top of the tree, intertwine the lights on top of and under branches. Work your way down and around the tree, hanging lights in the back as well. When you reach the bottom, hide any extra lights behind the tree.
How do you put ribbon on a Christmas tree like a professional?
HOW TO USE RIBBON IN A CHRISTMAS TREE /5 EASY WAYS ...
Add ribbon before ornaments
Begin your tree decorating by adding lights and then the ribbon. Ornaments should always go on last. If you attempt to add ribbon after hanging ornaments, you run the risk of breaking ornaments as you style your tree. Now it's time to grab your scissors and start ribboning.
So, for example, a typical, 7.5 foot tree would require about 75 feet of ribbon, and a 9 foot tree would need about 90 feet of ribbon.
HOW TO PUT RIBBON ON A CHRISTMAS TREE | 3 WAYS
Use Ribbon
You always see ribbons flowing down the sides of Christmas trees in store displays, and we think they have the right idea. Hanging ribbon gives the illusion of height, and it can add a fun pop of color to your tree.
Just make sure you get green tinsel that matches your tree's color. Once you've secured the best possible match, just layer the tinsel into the bare spot. Wrapping tinsel around each branch can fill out even the barest, least-fluffed fake trees.
Christmas Tree Flocking DIY- Give A Beautiful Snow Effect To Any Green ...
First, test each strand BEFORE you use them - it's hard to diagnose the string while on the tree. Lights go on the tree first, before ornaments, tree toppers or anything else. Plug them in and leave them lit before you start to put them on the tree. Most stores now sell special light test guns, for usually about $20.
How to decorate a Christmas tree on a budget - YouTube
For example, a 183cm (6ft) tree needs 574cm of lights (183 x 3.14) or 18ft 9in. But perfection is only obtainable with 37 baubles and 920cm (30ft) of tinsel. 'The formulas took us about two hours to complete,' said formula creators Nicole Wrightham and Alex Craig, both 20.
How much tinsel do I need for a 5ft tree?
Using their 'treegonometry' calculations they say a 152cm (5ft) Christmas tree would need 31 baubles, around 776 cms of tinsel and 478 cms of lights with a 15cm star or angel to top it off.
You can use a simple and easy ratio to determine how much garland you need. For every foot in height of your tree, you need approximately 9 feet of garland. If your tree is very full or you want the garland to be particularly thick and prominent on the tree, then go with 10 feet instead.
I find it easiest to work with pieces about three feet long, tuck the top end into the tree near the trunk at the top, tuck the bottom end into the middle of the tree as well, then push the middle of the ribbon in towards the centre of the tree as well, creating two βloopsβ.
7 Christmas Tree Design Ideas | How to Decorate a Christmas Tree
Our golden rule is 100 bulbs or 5 metres of lights per 2ft of Christmas tree. For a 6ft tree we recommend 300 bulbs or 15 metres of lights. If you're a fairy light lover, double up or mix and match styles for extra sparkle.
How to Make A Christmas Tree Look Fuller - YouTube
How to Decorate a Christmas Tree Like a Professional - YouTube
Tree Height | Amount of Ribbon |
---|---|
4β² β 5β² | 40 feet β 55 feet |
6β² β 6.5β² | 70 feet β 75 feet |
7β² β 7.5β² | 84 feet β 98 feet |
8β² β 9β² | 120 feet β 150 feet |
Add ribbon before ornaments
Begin your tree decorating by adding lights and then the ribbon. Ornaments should always go on last. If you attempt to add ribbon after hanging ornaments, you run the risk of breaking ornaments as you style your tree. Now it's time to grab your scissors and start ribboning.
How to Decorate a Christmas Tree Step by Step! Easy & thrifty tips!
How do you put lights on a Christmas tree like a professional?
Starting at the top of the tree, intertwine the lights on top of and under branches. Work your way down and around the tree, hanging lights in the back as well. When you reach the bottom, hide any extra lights behind the tree.
HOW TO USE RIBBON IN A CHRISTMAS TREE /5 EASY WAYS ...