What does Bonnie Raitt use for A slide? (2023)

What does Bonnie Raitt use for A slide?

Bonnie Raitt uses a custom made Dunlop glass bottle guitar slide.

The price was right, and she loved how it sounded. Raitt strings the guitar with a custom set of GHS Boomers (opens in new tab), in gauges . 013, . 017, .

The most common open tunings for slide guitar playing are open E, D, G and A. Allman and Trucks, widely considered to be two of the greatest slide players ever, have mostly preferred to play slide in open E tuning, which is spelled, low to high, E B E G# B E.

Bonnie Raitt shows off her ever-incredible slide guitar skills in the new video for her rendition of the Bros. Landreth's song, “Made Up Mind.”

Compared to glass, metal slides are harder and heavier… Resulting in a sound that is both brighter and harsher, with a longer sustain. Which is why they tend to be the slide of choice for electric guitar in the rock n roll/blues genres. As a side benefit, they are also much more durable than glass.

This ended up not working very well, so instead Eddie Van Halen changed to a regular set of strings. He used Fender Heavy Strings to begin with, later on changing to Fender 150XL gauge strings. These were supposedly used until the association with Ernie Ball Music Man.

Paul McCartney uses Ernie ball 2223 Nickel Super Slinky Electric Guitar strings Gauge 09 -042 for guitar. On Bass he uses Hofner H1133 B Bass nickel flat-wound strings in gauge 045, 055, 075, 095. as well as Roto-sound strings including RS88 Black Nylon bass strings gauge of 065, 075, 100, 115.

On his “Octabass” guitars he used D'Addario XL-170S short scale bass strings using the third for the guitar fifth which is an . 080 and the bass forth for the guitar's sixth which is a . 100. Chet changed strings when they had been on for a while.

To play slide guitar, the strings should be a little bigger than what you would use to play standard guitar. If you only want to play slide guitar on the guitar you're using, then put some . 011's on. They are fairly big strings but stay in tune well.

Widescreen (13.333 in x 7.5 in.) provides more slide surface area for the content, so that is the best choice for presentations. Widescreen won't fit on an 8.5" x 11" sheet of paper without you having to scale it down.

How do I get the best slide tone for my guitar?

slide guitar, also called bottleneck guitar, a technique and style of guitar playing, whereby a hard object, typically a steel tube, a steel bar, or a glass bottleneck, is pressed across multiple strings and slid along the fingerboard to produce a smooth, whining sound that is in some ways evocative of the human voice.

“Slide guitar” refers to a specific type of guitar play. However, the slide guitar style play isn't limited to just guitars. In theory, it can be used with any type of stringed instrument with a neck.

While removing dirt from your slide on its own helps, waxing the slide really brings back the slick ride that the slide boasted when it was new. To do this safely, we recommend rubbing wax paper over the entire slide surface. Rubbing the wax paper transfers the food-safe wax onto the surface of your slide.

Roll out your visqueen plastic to form the body of the slip and slide. For a wider slide usable by everyone (kids AND adults) use a 8' x 100' roll in either 4 mil clear or 6 mil clear. 6 mil is recommended for durability, especially if you are planning on reusing the slide in the future.

Wet It and Forget It!

Just connect a garden hose to the inflatable slip and slide's water bladder system, give it time to get good and wet, and you're all set. The trick to making an inflatable slip and slide more slippery is to simply make sure it's wet. That's all there is to it.

It should be short, medium or long and made of glass, metal, plastic, ceramic, bone, carbon fiber or other material. Wear the slide on, between, or over your index, middle or ring finger, pinky or thumb, played Spanish or lap style and plucked using bare fingers, a pick, thumbpick, or fingerpicks.

The material of your guitar slide effects its tone. Glass slides have a mellow and warm tone, and a shorter sustain. Metal slides have a bright and sharp tone, with a longer sustain. Porcelain and ceramic slides have tonal qualities somewhere in the middle.

At a gig last night I forgot to bring my slide. Borrowed a shot glass from the bartender. It was so wide I had to put both my 3rd & 4th fingers in it to keep it from falling off. But it did the job.

What gauge strings does Pete Townshend use?

Pete uses . 10-. 46 gauge light strings, but for a beefier sound, he swaps the . 46 for .

In terms of the jazz guitar greats, John Abercrombie used one of the lighter variations of strings (0.10s), whilst Mike Stern & John Scofield are all reported to use medium 0.11 strings. In terms of the heavyweights, Joe Pass used 0.12s and Wes Montgomery was apparently on 0.14s!

Yes, Eddie Van Halen boiled his guitar strings, or at least did so for a period of time in his career. And he is not the only guitarist to do so. It is one of those techniques that guitarists have shared for many years.

According to the information available, J.D. used Rotosound RS77 LD 045 Bass flatwound strings and Superwound 606 roundwound strings. Not much is known about the bass equipment, but it is obvious that John had it sorted with great complexity (for instance, it was set up by the acclaimed Pete Cornish).

Guitar Strings: What kind does Eric use? For his electric guitars, Eric uses Ernie Ball . 10 to . 46 gauge strings.