If you’ve been keeping up with the Siser® Blog you now Siser HTV can be applied to all kinds of materials and textiles. Including acrylic, triblends, fleece, and even cardstock! While we enjoy testing the limits of Siser products, we also encourage you to experiment with innovative uses for Siser HTV. Many of you have been trying out application on all kinds of substrates which we think is awesome! A common question we receive is how to apply on items that include “Do Not Iron” or “Cool Iron Only” on the tag. (These tips will also work for applying on heat sensitive fabrics like rayon, 100% polyester, silk, or any other material you’re unsure about.)
My first piece of advice is…
Tip #1: Don’t Apply Unless You Have An Extra to Spare
If the tag specifically calls “No Iron” or “Cool Iron Only” it’s most likely because the material will discolor under high heat. Sometimes the discoloration is temporary. Other times it’s permanent. If you have a project you really want to do and you’re willing to run the risk of irreversibly ruining the item, it’s best to have at least one duplicate item as a back up. However, if you’re in a pinch, you can test press an inconspicuous area of the garment like inside on the back.
Note the darker box shapes left behind from the carrier after pressing with high heat.
Tip #2: Use a Heat Press
Did you know most iron settings are actually a range of temperatures? When you hear the little tick from the iron you know you’ve reached the highest temperature in your setting and it will cycle back down to the lowest temperature in the setting. For most projects the variance in temperatures is not a problem, but when working with heat sensitive fabrics the regulated, accurate temperature on a heat press is your best bet. Additionally, achieving proper pressure with your home iron is not as accurate as a heat press. Proper pressure is important for every project, but especially when we’ll be reducing another part of the application process. Which brings me to tip #3!
Tip #3: Lower Your Temperature
The great thing about Siser materials is that most of them can be applied at the low temperature of 280°F! Many competitor materials require higher temperatures that restrict your application options. Our heat application settings, listed on the Siser website and App, are what we suggest for best application, but they can be adjusted to fit your project. There’s still a chance the material won’t react well to the heat, but that’s why having an extra to spare is tip #1!
Tip #4: Increase Your Dwell Time
Since we’ve lowered the temperature we need to increase the amount of time the material receives heat. This will help fully set the heat transfer vinyl.StripFlock® typically takes 15-20 seconds so I pressed for 25-30 seconds. StripFlock requires you to wait until the carrier sheet is cool before peeling it. You’ll feel some resistance as you peel. That’s normal due to the fuzzy texture releasing from the pressure sensitive carrier.
Tip #5: Use A Cover Sheet
We always recommend using a heat transfer cover sheet for all your presses. However this heat barrier is especially important when pressing heat sensitive materials. Heat transfer cover sheets offer delicate textiles a layer of protection from the hot upper platen. If you’re working with an especially sensitive fabric, you may want to use parchment paper as your cover sheet since it releases heat the quickest. If you don’t have a non-stick cover sheet or parchment paper then you can use shiny side of multipurpose paper or a clean, cotton pressing cloth.
With these few tips in mind you can create awesome projects with Siser HTV- like this cute birds in flight scarf!
If you have any questions about this post please leave them in the comments!
Want to watch these tips in action? See how the lower temperature application method works in the video below:
https://www.youtube.com/watch?v=LgDRJ1RYiEQ
Post Views: 255,614
By Lily|2024-01-26T16:51:42-05:00February 1st, 2017|Heat Transfer Vinyl|722 Comments
About the Author: Lily
Lily is Siser's go-to crafter. Her ideas and abilities to incorporate HTV into her projects is inspiring. Well versed in Heat Transfer Vinyl, Lily embraces the methods and materials to deliver creative content week after week! If you love Lily's content, make sure you check her out on our Youtube channel's Clued Into Crafting segments!
Related Posts
722 Comments
Denise May 16, 2017 at 2:27 am - Reply
Can you put Siser Easy Weed Transfer material on a Burlap Banner? I am using an iron to do this and do I need to use a Siser Heat Press Multipurpose Cover Sheet?
Lily May 16, 2017 at 9:25 am - Reply
Hi Denise, yes EasyWeed heat transfer vinyl can be applied to burlap! Set your iron to “Cotton” and press for 20-30 seconds. If any HTV lifts as you peel the carrier, lay it back down and press for another 10 seconds. If you don’t have a heat transfer cover sheet or multipurpose paper you can use parchment paper or a clean pressing cloth like some scrap cotton.
Katie G September 18, 2020 at 4:17 pm - Reply
Hi there, can you apply easyweed to Biothane beta coated webbing? It has a melt temp of 290-310°F.
Lily September 21, 2020 at 12:08 pm - Reply
Hi Katie! While we have not tested this specific material, it’s sounds like it could be plausible to apply HTV. I’d suggest testing EasyWeed® and EasyWeed® Extra (made for nylon and coated fabrics) with a temperature as low as 270°F and pressing time 15-20 seconds.
Brandon Hagan October 13, 2020 at 1:54 am
I’ve got a customer who provided me with the shirts he wants. They’re the dry fit athletic style polo. Etsy htv is best for this
Lily October 13, 2020 at 8:17 am
Hi Brandon! I would suggest using EasyWeed® Stretch or anything else from the EasyWeed family. Although Brick® 600 looks cool on polos too, but it is a bit more of an advanced product when it comes to cutting.
Brandie N Hermann December 13, 2020 at 6:25 am
100% polyester black seat covers….wanting to apply white htv (easyweed). They are thicker than your normal cheap seat covers…made by Dickinson.
Are they gonna be okay on my heat press at about 250? Would it be better to press for a longer time or press in multiple short presses. I ask this last part because the design is larger than my 15×15 heat press…so I will have to press multiple timesLily December 14, 2020 at 9:24 am
Hi Brandie! If the seat covers have any kind of coating on them, you’ll need to use EasyWeed® Extra for the HTV to stick. You can check for a coating with a bit of water on the fabric. If it absorbs the water then the fabric is not coated. I’d recommend pressing in sections for the shortest amount of time possible until the HTV releases from the carrier and then go back with longer presses and a heat transfer cover sheet on top of the HTV.
Dawn September 19, 2021 at 4:56 pm
Have you been able to test Biothane yet?
Lily September 21, 2021 at 8:43 am
Hi Dawn! We’d suggest testing EasyWeed® Extra on Biothane with the lower temperature application method, but we have not tried this process so the results may vary.
Diana July 12, 2022 at 6:59 pm
Hi! Can eastward stretch be applied to microfiber towels?
Lily July 13, 2022 at 8:45 am
Hi Diana! EasyWeed® Stretch can be applied to microfiber towels, however it may be difficult to achieve the firm pressure that Stretch needs with a fluffy pile like microfiber has so I would encourage using standard EasyWeed® if you can.
Dessie January 14, 2024 at 12:03 pm
Hi Lily, can you use any siser easyweed products on wool socks? Can you use a heat press on wool socks? What settings would you recommend?
Thanks!Lily January 15, 2024 at 9:02 am
You sure can, Dessie! I would suggest following the settings for whatever kind of Siser Heat Transfer Vinyl product you decide to use. You can find settings on our website or app.
Alli Sessums December 15, 2020 at 8:50 pm - Reply
Hi Katie! We’re you able to get this to work? I want to hear press my dogs biothane collar!
Jasara December 19, 2020 at 5:00 pm - Reply
Hi! Can you apply easyweed to cashmere? (Or would you recommend a different type of HTV?). And if so, what temp? Thanks!
Lily December 21, 2020 at 9:17 am
Hi Jasara! EasyWeed® may show the texture of the fabric, but it will adhere. I’d suggest a thicker HTV like StripFlock® Pro which will cover the texture and is fuzzy/soft like the cashmere. As for temperature, unless you have an extra to test I’d go with the lower temperature application method (270-280°F for 15-20 seconds) to be safe.
Whitney September 10, 2021 at 9:59 pm - Reply
I have 100 polyester youth basketball jersey and sisters htv what do you recommend on heat and time
Lily September 13, 2021 at 9:01 am
Hi Whitney! Sometimes 100% polyester is not heat sensitive and sometimes it is, so I would suggest test pressing the jersey (test press steps are shown in this video) before applying the HTV. If the fabric discolors then you can use the lower temperature method shown in the video, but if the fabric does not discolor then you can use the standard application settings recommended for the type of HTV you’re using. You can use whichever HTV (I personally would probably go with EasyWeed®) you prefer and can find recommended settings on our website product pages or App.
Valerie March 30, 2022 at 7:46 pm - Reply
Can you apply heat transfer to fleece lined leggings?
Lily March 31, 2022 at 8:32 am
Yes you can, Valerie! Fleece is mostly made up of polyester so it should be just fine.
Teri December 4, 2022 at 5:48 pm - Reply
yes – I put easyweed on a biothane collar for my dog
Kelzi May 30, 2023 at 4:13 pm - Reply
Do you think this could with Merino wool knit fabric?
Lily May 30, 2023 at 4:25 pm
Hi Kelzi! HTV can work with wool fabric. I would suggest doing a test press first to see if the wool is heat sensitive or not.
Steph February 10, 2021 at 11:43 am - Reply
Hi Lily would heat transfer work on a child’s plastic apron? Or would another type of vinyl be better as I’m worried about the apron melting!
Maria Zapata February 15, 2021 at 10:09 pm - Reply
Hi how are you? Do you happened to know if applying that much heat to a swimwear fabric (polyester ) it can work? Like a iron branding type ? Or if you have any other suggestions for this thanks
Lily February 16, 2021 at 8:29 am - Reply
Hi Maria and thanks for reading the Siser Blog! HTV can be applied to swimwear to with a home iron or heat press.
Karyn Proudlock December 7, 2021 at 2:09 pm
Hi! I was hoping to add a HTV small name to a quilt I’ve made. But on my tester piece it basically melted the poly quilt batting. Is it possible to add HTV to cotton (not over any stitching) and not destroy the quilt batting?
Lily December 8, 2021 at 9:27 am
Hi Karyn! It sounds like the poly quilt batting is heat sensitive, so I’d suggest using the lower temperature application method (270°F for 15-20 seconds.) If you already tried that and the batting still melted, you may have to test continuing to lower the temperature and increase the pressing time.
Bridget March 17, 2021 at 7:13 pm - Reply
Is stripflock the best htv for silk? Or will any htv work?
Lily March 18, 2021 at 10:50 am - Reply
Hi Bridget! Any HTV will work. I used Metal on satin/silk in this video.
Jessica August 16, 2021 at 8:44 am - Reply
Hi!
Can you help me please (:
I have a swimsuit that is 80% nylon and 20% spandex.
What should I use and how should I apply it?? (:
I’m a newbie and I’m scared to screw it up 😅
Thank you 💙Lily August 16, 2021 at 4:20 pm - Reply
Hi Jessica! Typically we recommend applying EasyWeed® Extra to nylon garments, but since the swimsuit contains a good amount of spandex and is likely form-fitting, I’d suggest EasyWeed® Stretch (but either material will work.) A Heat Press is always going to give you the best application results, so if you have one available I would suggest using it along with our standard recommended settings. The settings do vary between the 2 materials, so I would double check our website or app before applying. Good luck, I know you can do it! :)
Lynda January 19, 2022 at 4:04 pm - Reply
Hi Lily,
I have a vinyl fleece backed tablecloth can I htv this?
Lucy October 3, 2022 at 2:28 pm - Reply
Can I use easy weed on cooling towels
Lily October 3, 2022 at 2:39 pm - Reply
Hi Lucy! There’s a wide variety of cooling towels, so to be safe I would suggest test pressing one of the towels to check if you need to use the lower temperature application method and see if the HTV will stick before going forward with the full project.
Patsy Robinson June 29, 2017 at 10:09 pm - Reply
Can you put Siser Easy Weed on a rayon banner? I have a heat press.
Lily June 30, 2017 at 12:09 pm - Reply
Absolutely! You can follow the standard suggested time and temp, however, keep in mind rayon may discolor from the high heat.
Peggy Eddy April 16, 2020 at 11:26 pm - Reply
Can I use htv vinyl on dacron sailcloth?
Lily April 22, 2020 at 9:51 am - Reply
Hi Peggy! Yes, I’d suggest EasyWeed®.
Noah Ruiz August 6, 2020 at 10:36 pm
I was wondering if I can use Siser easyweed HTV on 210 denier polyester ?
I did a few different temps and times most of them came off after wash. The main design stayed on but when it came to drying most of it came off. Was it my fault for drying or use different HTV or??
Lily August 12, 2020 at 12:03 pm
Hi Noah! Yes, EasyWeed® HTV can be applied to 210 denier polyester. If the polyester has any kind of waterproof coating, that may be the cause of the peeling. In that case, I’d suggest using EasyWeed® Extra on the next application. If there’s no coatings, the peeling most likely occurred from a pressure issue during application. You may need to use a heat transfer pillow for your next application. Finally, if you use liquid fabric softeners in the washer they will lead to peeling HTV (dryer sheets will not have this result.)
Shariah May 16, 2020 at 11:48 pm - Reply
Hi Lily,
I have a t-shirt that’s 67% modal/28% recycled polyester/5% spandex.
Can I use Siser Easyweed vinyl on it?
Thanks 😊Lily May 18, 2020 at 2:31 pm
You sure can, Sharia! Check out this blog post for more tips about HTV on Modal.
Elisa September 22, 2020 at 3:23 pm - Reply
Hi,
I’m wondering if can use Siser easy weed vinyl on a 95% polyester and 5% rayon sweater? If so, where can I find the temp and time application info for that vinyl?
Thanks!
Lily September 22, 2020 at 4:09 pm - Reply
Hi Elisa! Yes, you can apply HTV to a polyester/rayon blend. I’d suggest following the time, temperature, and pressure recommendations in this blog post since rayon is similar to modal. Application settings are at the bottom of each product page on our website, but please note they can be adjusted for heat sensitive fabrics.
Elisa September 22, 2020 at 6:52 pm - Reply
Thank you!!
Kristine January 2, 2021 at 10:59 am - Reply
Are you able to apply htv to 100% linen?
Lily January 4, 2021 at 11:43 am - Reply
Hi Kristine! In most cases, HTV can be applied to linen with the standard application settings.
Eddie July 13, 2017 at 7:25 pm - Reply
can you put siser easy weed on a 92% nylon 2% spandex swimsuit?
Lily July 18, 2017 at 11:29 am - Reply
Hi Eddie! For a swimswuit that’s 92% nylon 2% spandex, you’ll need EasyWeed Extra to be able to adhere to the nylon.
Krystal February 18, 2021 at 10:51 pm - Reply
What abouy onto a wind breaker jacket
Lily February 19, 2021 at 8:51 am - Reply
Hi Krystal! You’ll need to use EasyWeed® Extra for a windbreaker jacket if it’s nylon and/or has a waterproof coating. If you want to use any other type of HTV I’d suggest watching this video.
Rachel Marie June 3, 2020 at 2:25 pm - Reply
I have a suit that is Tyvek 400. Can I use regular HTV on that type of material?
Lily June 4, 2020 at 10:38 am - Reply
Hi Rachel! Due to the resistance description of the fabric, it’s possible that an HTV application will be unsuccessful. We recommend test applying a small amount of EasyWeed® Extra (made with a stronger adhesive for nylon and coated fabrics) to see how well it sticks before doing a full application.
Jose Torres July 19, 2017 at 5:51 pm - Reply
I have a female blouse that is 95% Rayon and 5% Spandex. Would ColorPrint Extra work for this material? If so, what would be the recommended settings?
Lily July 20, 2017 at 10:33 am - Reply
Jose, ColorPrint Extra will work, but it’s not necessary for rayon. You could use ColorPrint Easy with the standard application settings.
Marin July 23, 2020 at 6:39 pm - Reply
Can I apply HRV on waxed canvas?
Lily July 24, 2020 at 10:46 am - Reply
Hi Marin! Since waxed canvas is water resistant, I’d suggest testing EasyWeed® Extra. You may need to remove the waterproof coating in order for the HTV to adhere properly.
Melanie February 15, 2021 at 5:42 pm - Reply
Hi! Can I use Easyweed stretch on a 90% polyester 10% spandex? It’s for a dance leotard. I also need to layer it.
Lily February 16, 2021 at 8:21 am
Hi Melanie! Yes, you can use EasyWeed® Stretch on a polyester/spandex blend leotard. You can layer EasyWeed Stretch on top of itself, but if you’re looking to eliminate extra weight from the fabric, I’d suggest using the knockout method.
Tina March 13, 2021 at 12:15 am - Reply
What would be the best vinyl for a shirt that is 95% cotton 5% spandex?
Lily March 15, 2021 at 8:30 am - Reply
Hi Tina! I would go with EasyWeed® Stretch, but any Siser® HTV would adhere.
Kelsie Meza August 14, 2017 at 2:35 pm - Reply
I have a shirt that I want to add a logo to that is 100% Rayon – what HTV would i need to use and at what temp?
Lily August 15, 2017 at 10:54 am - Reply
Kelsie, you can use whichever HTV you like best with it’s standard application settings.
Cheri February 1, 2022 at 8:58 pm - Reply
Hi lily. I was wondering if i could press HTV to a valour robe? Its for my son and it doesn’t have to be perfect. I did read you shouldn’t but if i shave the length a little bit would it adhere??
Lily February 2, 2022 at 8:42 am - Reply
Hi Cheri! Velour is a cotton/poly blend so it can be heat applied. However it can be heat sensitive sometimes so if you only have 1 shot at it, I’d suggest using the low temp application method: 270°F for 15-20 seconds. If the velour has a low pile like these velvet treat bags I decorated then you don’t need to shave the length, but if the fibers are really fluffy like these slippers I decorated then you may want to shave back a bit of the fluff in the area you plan to decorate.
Gayle June 6, 2019 at 9:07 pm - Reply
Can you use HTV on a Kayak? I’d like to decorate mine
before putting her in the water this year.Lily June 7, 2019 at 8:12 am - Reply
Hi Gayle! I would not recommend heat transfer vinyl for a kayak. However, you could use EasyPSV® Permanent or Glitter. These vinyls are built to last outdoors exposed to the elements and are applied like a sticker decal.
Jennifer May 26, 2020 at 9:05 pm - Reply
I’m trying to heat press a design on sports bar. It states the material is 88% recycled polyester. Can I use easyweed on this? Or do I need easyweed extra? Temos?
Lily May 27, 2020 at 10:04 am - Reply
If the polyester appears to have a waterproof coating (water will bead up and slide off instead of absorbing into the fabric) then you will need to use EasyWeed® Extra, otherwise you’ll be fine with regular EasyWeed®.
Matil July 7, 2020 at 9:53 am - Reply
I just burnt a outdoor pillow with an iron. Can htv not be pressed on outdoor vinyl?
Lily July 13, 2020 at 10:06 am
Hi Matil! If the outdoor vinyl feels like plastic, it is likely heat sensitive. I would suggest checking the tag of the pillows for fabric content and clues like “cool iron only” or “do not iron” that indicate heat sensitivity. In some very sensitive cases, even the lower temperature application method will still leave iron marks.
Jennifer August 16, 2017 at 12:43 pm - Reply
Hi there, could I use holographic HTV on a 95% rayon 5% tank top.
Lily August 17, 2017 at 8:39 am - Reply
Hi Jennifer! Yes, you can use Holographic and our suggested application settings. If your tank top is very stretchy, press cautiously since Holographic HTV is more rigid than others. To prevent puckering from the pulling/stretching of the rayon, make sure the tank top is relaxed (not stretched out) when applying Holographic.
Maria August 21, 2017 at 9:08 am - Reply
I have a Ponte Fabric Skirt (65% Ray 30% Nylon 5% Span) What HTV would work best as it has a four way stretch and is a tri blend? Thanks!
Lily August 22, 2017 at 11:01 am - Reply
Hi Maria! EasyWeed Stretch would be your best option.
Kathryn Oleary June 20, 2020 at 5:33 am - Reply
Can I put HTV on a puffer jacket?
Lily June 22, 2020 at 9:26 am - Reply
Hi Kathryn! Yes you can, but you’ll likely need to use EasyWeed® Extra since the outer fabric is usually nylon.
Shannon McClain January 16, 2021 at 2:40 pm - Reply
Hi, Lily I’m having trouble with easy weed vinyl sticking to a polyester mix material. What temperature and extra tips do you recommend?
Lily January 18, 2021 at 2:31 pm
Hi Shannon! I’d suggest test pressing with the standard application settings for EasyWeed® (305°F, medium pressure, 10-15 seconds) If the polyester blend doesn’t discolor then you don’t need to adjust your temperature. If the HTV is still not sticking with the proper settings, then you may want to check for a waterproof coating. This video explains how to identify coated fabric and remove the coating so the HTV can stick.
Katherine Williams September 24, 2020 at 9:03 pm - Reply
What do you recommend for silk?
Lily September 25, 2020 at 10:12 am - Reply
Hi Katherine! If the silk is very fine or very low quality, it is more likely to be heat sensitive. I’d suggest getting an extra to test with the normal heat settings. If that’s not possible, then I’d use the lower temperature application method (270°F for 15-20 seconds) to be safe. Some silks do just fine with the typical heat settings, so a test press will be your best option.
JoAnn August 25, 2017 at 8:58 am - Reply
Hi! My friend asked me to personalize her. Ridesmaid robes that are made of silk. Can I do that? What material would work best? How high should the temperature be and how long to press. Thank you!
Lily August 25, 2017 at 9:08 am - Reply
Hi Joann! Check the tag of the robes. If it says “cool iron only” or “do not iron” it’s likely that they may be heat sensitive. You can use whichever HTV you please, but you may want to lower your temperature to 280°F and press for a longer amount like 15-20 seconds.
Tara DeLee July 27, 2020 at 7:03 pm - Reply
Hi! I have an under armour backpack that is 77% polyester and 23% nylon. It also says do not iron on the tag. What kind of Siser HTV do I need? Can I use the regular easy weed with a lower temperature?
Lily July 28, 2020 at 8:18 am - Reply
Hi Tara! You’ll need to use EasyWeed® Extra since the bag contains nylon. I would also recommend using the lower temperature application method (270°F for 15-20 seconds) since the tag says “do not iron.” Please note, you can use lower temps than 270°F but the pressing time will need to be increased further.
Megan September 10, 2017 at 4:42 pm - Reply
Question:
I have a friend who send me a shirt she wants glitter htv applied to. I’ve made lots of shirts, but she sent me a shirt that is 95% rayon and 5% spandex. I’ve never applied htv/glitter htv to a blend like this. I’m worried about scorching the shirt.Do I need to lower the temp of my heat press, and if so, what the lowest temp I can use for the glitter to adhere?
Thank you in advance!Lily September 11, 2017 at 8:49 am - Reply
Hi Megan! To avoid scorching the shirt, lower your heat press temperature to 280°F (this is the lowest temperature we recommend) and increase your pressing time to 15-20 seconds.
Ann September 19, 2017 at 6:49 pm - Reply
Hello! I was wanting to personalize robes for my bridesmaids for my wedding with glitter vinyl, I can pick either silk or rayon for the material? Would you recommend one over the other, and would I be able to use a home iron with possibly a cover sheet or a cotton barrier?
I’m glad I stumbled across this page! :)
Thanks in advance!Lily September 20, 2017 at 11:01 am - Reply
Hi Ann! Silk and rayon are both considered heat sensitive fabrics, so that choice is up to your personal preference. Either way, you’ll want to use a low setting on your iron and press until you can peel the clear carrier without lifting the HTV. A cover sheet or cotton cloth/towel/pillow case will be suitable as a heat barrier between the iron and HTV.
Machelle September 23, 2017 at 3:27 pm - Reply
Is it possible to apply Siser glitter flake to a product that is 92% Micro Spandex and 8% Spandex? If so what Time and Temperature for a heat press? also Easy weed stretch same material.
Machelle September 23, 2017 at 3:28 pm - Reply
I meant 92% polyester & 8% Spandex sorry
Lily September 25, 2017 at 9:43 am - Reply
Machelle, while it’s possible to apply Glitter HTV and EasyWeed® Stretch to 92% poly 8% spandex keep in mind the Glitter will not stretch with the spandex. With a high percentage of polyester, it’s likely the material is heat sensitive. To avoid harming the fabric, lower the temperature to about 280°F and add 5-10 seconds extra pressing time to the Glitter and EasyWeed™Stretch.
Tracy January 30, 2018 at 6:58 pm - Reply
Can I use regular easyweed on 92% micro polyester and 8% spandex? it does say do not iron however i have put HTV on my daughters gymnastics leo’s in the past. Thoughts?
Lily January 31, 2018 at 11:20 am
Hi Tracy, I would recommend using the lower temperature and longer pressing time mentioned in this post for best results. If the tag says “do not iron” it’s very likely heat sensitive. Additionally if you’re able to, use EasyWeed® Stretch. It will perform better on the spandex blend.
Dawn January 14, 2024 at 1:19 am - Reply
Ii am trying to put words on a 90 poly 10 spandex arch cover for baby shower. What htv best and settings?
Lily January 15, 2024 at 8:54 am
Hi Dawn! This is definitely a project for EasyWeed® EcoStretch™– With a low temp application that will prevent scorching on the polyester and super stretching power that will move with the spandex, it will get the job done! I’d suggest using the standard settings: 250°F, medium pressure, 10-15 seconds, hot peel.
Hanaa October 2, 2017 at 1:32 pm - Reply
Can I tie dye a shirt AFTER applying your foil HTV?
Keith October 2, 2017 at 3:55 pm - Reply
Although we’ve never tried do do a tie dye shirt after application… I don’t see why it wouldn’t work. The dye shouldn’t affect the adhesive and shouldn’t change the color of the foil. I would recommend testing on an old shirt first. If it does work, please share your results with us on social media using the hashtag #SISERNA
C Graumann October 3, 2017 at 6:29 pm - Reply
Making Koozies out of that Neoprene stuff (like every can Koozie) what temp with a heat press and how long???
Lily October 4, 2017 at 8:37 am - Reply
For neoprene koozies, you can follow our time and temp recommendations for the the type of HTV you’re using, which can be found on our website or the Siser App. Additionally, you may want to check out my How to Heat Press Can Koozies blog post for a full tutorial.
Shalon verdin October 22, 2017 at 11:00 am - Reply
Can you use htv on ceramic mugs and platters and if so what temp and how long to press temp for
Lily October 24, 2017 at 10:49 am - Reply
Shalon, HTV is not recommended for decorating hard surfaces or ceramics. Permanent sign vinyl would be best for those types of projects. We will have our own brand of sign vinyl, called EasyPSV, soon!
Stephanie October 31, 2017 at 3:46 pm - Reply
Hello I just ordered 30 of what I think are the wrong tote bags for applying HTV. They are like a heavy duty polyester described as 600-denier polyester. Will Sister Easyweed work on this type of material (following the lower heat, test advice) TY
Lily October 31, 2017 at 4:09 pm - Reply
Yup, Stephanie, those will work fine! You’ve got the right idea following the lower heat and test pressing the polyester.
Meg December 18, 2021 at 11:15 pm - Reply
Hi Stephanie, I need to apply initials to some leather Jingle Bells. Will silver metallic easyweed htv work for this? Thanks!
Lily December 20, 2021 at 9:06 am - Reply
Hi Meg! I’d recommend test pressing a small bit of HTV on a piece of the leather to ensure it will stick. Real leather continues to release oils which may prevent the HTV from sticking properly.
Amanda October 8, 2022 at 9:39 am - Reply
Can I use htv on a reflective material, not reflective htv but a work hoodie they want htv down the sleeve but the wording will go over the reflective material that’s sewn on.
Lily October 11, 2022 at 9:08 am - Reply
Hi Amanda! Reflective fabrics often have coatings that can prevent HTV from sticking. I would suggest test pressing a small piece of EasyWeed® Extra and seeing how it fares before going through with the full decoration.
Sheryl Schneider November 12, 2017 at 4:29 pm - Reply
Does HTV work on nylon? I ordered some shoe bags and just melted the bag :(
Lily November 13, 2017 at 12:57 pm - Reply
Hi Sheryl! EasyWeed® Extra is the only Siser® HTV that can be applied to nylon. If the nylon melted then it is heat sensitive and will need a lower temperature with a longer pressing time to apply HTV.
shauna November 18, 2017 at 9:08 am - Reply
Hi i am trying to personalise satin robes i have done many with plain htv glitter and foil but lately i am finding the vinyl is lifting afterwards that is before washing so im wondering if you can give me some advice on why this may be happening my setting on my heat press is usually 120 140 150 15 sec 20 sec 25 sec ive tried them all .
What is the best vinyl to use on satin
best tempi just cant understand why it is lifting after a day are two .
im so frustrated.
Lily November 20, 2017 at 2:13 pm - Reply
Hi Shauna, the lowest temperature we recommend using is 270°F otherwise the HTV does not get enough heat to bond properly. Try pressing at 270°F for 15 seconds. If the vinyl still lifts, press for 5 second increments until fully applied. This method will help determine the best time setting for the robes.
Heather Brown November 19, 2017 at 12:25 am - Reply
Hello, would any specific HTV work for a mesh tie back headband, 90% polyester and 10% spandex. It is like a dri fit tennis headband. Thank you!
Lily November 20, 2017 at 10:12 am - Reply
Hi Heather! I’d recommend EasyWeed® Stretch since the headband has more than 5% spandex for best results.
Jason Stensland November 20, 2017 at 11:42 am - Reply
I have a North Face jacket to apply some HTV to. It is 93% Polyester & 7% Elastane. Will regular Easyweed work? Easyweed Stretch OR EW Extra possibly?
THANK YOU!
Lily November 20, 2017 at 1:34 pm - Reply
Regular EasyWeed® will do fine on that blend. EasyWeed® Stretch will work as well, but you do not need EasyWeed® Extra since there isn’t any nylon in the garment. You may want to check out How to Heat Press Fleece for additional tips before you go through with your project.
Alyssa Smith June 17, 2020 at 10:20 pm - Reply
Hello! I’m wanting to use glitter htv to label storage cubes. I believe the material is nonwoven polypropylene. Am I able to use the glitter vinyl on those?
Lily June 18, 2020 at 8:33 am - Reply
You sure can, Alyssa! We decorated a polypropylene tote bag with EasyWeed® Electric and Metal HTV in this blog post but the process would be the same for Glitter HTV as well.
Samantha November 27, 2017 at 8:21 pm - Reply
Hello! Can I put htv on an adidas drawstring bag?
Lily November 28, 2017 at 9:29 am - Reply
Hi Samantha! Yes, HTV can go on drawstring bags. Most drawstrings bags are polyester but you’ll want to double check the tag for any indication that the material may melt from high heat. If so, you can follow the tips in this blog post. Otherwise, iron on like usual.
Lindsey December 5, 2017 at 6:43 pm - Reply
I have a pillow case that’s polyester velvet. Can I use htv on that? If so, what kind do you recommend and what temperature? These are for a client and I do not have any extra to test on. Thanks
Lily December 6, 2017 at 9:31 am - Reply
Hi Lindsey! Yes, we actually just applied on velvet not too long ago. However, since it’s for a customer I would definitely recommend trying to put heat on an inconspicuous area and see how the velvet fares. Following these tips for heat sensitive items would also be a safe way to get the job done.
Jessica July 10, 2020 at 11:46 am - Reply
What HTV would you recommend on a velvet pillowcase?
Lily July 13, 2020 at 10:20 am - Reply
Hi Jessica! I would suggest using StripFlock® Pro since it’s fuzzy like velvet then you won’t lose any of that fun texture.
Erika December 7, 2017 at 7:49 am - Reply
Hello…what htv do you recommend and temperature for a 50% polyester, 47% rayon, and 3% spandex sweater? I’m trying to create a ugly Christmas sweater. Thanks
Lily December 7, 2017 at 8:46 am - Reply
Hi Erika! With the high amount of polyester and rayon in the garment, I’d recommend pressing at 280°F, since those materials can be heat sensitive. This blog post on heat pressing rayon may be helpful for you. Also, since the garment has spandex I’d suggest EasyWeed® Stretch if you want the graphic to stretch with the fabric. However, I could see how you might want to use Glitter HTV or Holographic (it is a Christmas sweater after all) and luckily all Siser® heat transfer vinyls can be applied at the low temperature of 280°F. When applying at a lower temperature, you’ll have to increase the pressing time, but you’ll still end up with great results!
Sharon October 18, 2020 at 8:02 pm - Reply
Hi Lily, I want to put my name and a design on my garment bag. The material is: breathable non woven 120GSM fabric and water-resistant. I have a cricut easy press. Which HTV do you recommend?
Lily October 19, 2020 at 8:39 am - Reply
Hi Sharon! Since the fabric is water-resistant you’ll have to use EasyWeed® Extra or remove the waterproof coating in the application area in order to apply any other kind of HTV. This video shows how to remove a water resistant coating.
Stacy December 9, 2017 at 12:48 pm - Reply
What about Pashmina? I can’t find anything online about htv being used on pashmina.
Lily December 11, 2017 at 3:24 pm - Reply
Hi Stacy! Most pashminas are a poly/cotton blend or wool. I’d recommend checking the tag to be certain of the fabric, but regardless any HTV can be applied with regular settings.
Taiya Semper June 7, 2020 at 11:29 am - Reply
Hello. Do you have a product, (Easyweed Extra perhaps?) That would work on PUL waterproof fabric?
Lily June 8, 2020 at 2:14 pm - Reply
Hi! Yes, EasyWeed® Extra is the best choice for coated fabrics. If you’re still having issues getting the HTV to stick, you may need to remove the coating first. In that case, I recommend watching this video.
Sherry Smith December 10, 2017 at 4:28 pm - Reply
I have a camo hoodie that is 98% Polyester and 2% Spandex. Am I correct that I need to use Siser Easyweed Stretch and a lower temp of 280 degrees to apply?
Lily December 11, 2017 at 3:27 pm - Reply
Hi Sherry! You can use EasyWeed® Stretch, but with such a low percentage of spandex, EasyWeed® will do just as well. It’s up to your preference. 280°F is a safe temperature to apply at, however you’ll need to increase your overall pressing time by 5-10 seconds. If you’d like to apply HTV with the standard time and temperature settings you can always heat apply an inconspicuous area of the garment and see how it reacts to the high heat. If no discoloring or melting occurs, then you can go ahead with the regular time and temperature.
Carlos sanchez April 18, 2020 at 5:02 pm - Reply
I want to please a 100% poly with. Easy weed. What would you recommend with heat and pressure
Lily April 21, 2020 at 9:54 am - Reply
Hi Carlos! Sometimes 100% poly is heat sensitive, so if you’re unable to test it’s sensitivity, I’d err on the side of caution with the lower temperature method from this post.
Scott December 13, 2017 at 9:11 pm - Reply
I looking to apply htv to a poly china silk, not sure which to use and the time and temp to use.
Lily December 14, 2017 at 12:01 pm - Reply
Hi Scott! Being a blend of two heat sensitive fabrics (polyester and silk) I’d highly suggest pressing the fabric at a low temperature of even 270°-275°. This will prevent possible scorching or melting of the material. However with a lower temperature comes a longer pressing time. Add 10-15 extra seconds to the recommended pressing time of whichever HTV you choose. The best thing about Siser HTV is pretty much all of them can be adjusted to this method for heat application. So really you could use any kind of EasyWeed, Glitter, Holographic, etc.
Diane December 17, 2017 at 11:13 pm - Reply
Can easyweed heat transfer be applied to a life jacket / vest (Evoprene material)?
Lily December 20, 2017 at 11:17 am - Reply
Hi Diane! We’ve applied HTV to neoprene life jackets and Evoprene is relatively similar. I would still follow the tips in this blog post if you only have 1 to decorate just to be safe. If you can use an extra as a tester then that would be ideal.
Kim Mason December 22, 2017 at 11:31 am - Reply
I have polypropylene grocery bags to put a design on. Can I use easyweed on them?
Lily December 26, 2017 at 10:36 am - Reply
Hi Kim! Absolutely, you can apply HTV to polypropylene. You will need to use a low temperature of 270°-280°F to prevent carrier lines and melting.
Jo October 20, 2020 at 10:20 pm - Reply
how how long do you press the easyweed transfer for at 270
On the polypropyleneLily October 21, 2020 at 8:32 am - Reply
Hi Jo! When pressing with a lower temperature like 270°F we recommend increasing the standard pressing time by 5-10 seconds, so typically we suggest pressing for 20-25 seconds total with a temperature of 270°F.
Claudia January 24, 2018 at 2:20 am - Reply
Hello, can I apply Htv on a shirt 65% nylon & 35% polyester? What are the steps…thank you☺?
Lily January 24, 2018 at 8:24 am - Reply
Hi Claudia! Any garment containing nylon can be decorated with HTV, but you must use EasyWeed Extra as your base layer for it to stick. However, since nylon and polyester can be heat sensitive I’d suggest testing the fabric to see how it reacts. If you don’t have an extra shirt to test press at the standard suggested application settings, then use a low temperature like 280°F and higher pressing time like 15-20 seconds for best results.
Chris Ruthven January 26, 2018 at 7:17 pm - Reply
Hi, I have a navy blue batting jacket to put a pocket size logo on. It says it is 100% polyester but also states on an attached tag that is is wind and waterproof which makes me think it is a coated polyester. I have cut the design from siser easyweed but hesitated when I thought about them being coated. Suggestions?
Lily January 29, 2018 at 9:24 am - Reply
Hi Chris! To test for a waterproof coating, sprinkle a little water on the fabric. If the water absorbs then EasyWeed® will stick. If the water forms beads then the polyester is coated and will need to be removed in the area you plan to decorate with HTV. The coating can be removed with an HTV remover like methylene chloride, just be sure to let the area dry completely before heat applying.
Chantel January 27, 2018 at 3:22 pm - Reply
Can htv be applied to 95% cotton 5% spandex what kind of htv would work best and what iron setting thank you
Lily January 29, 2018 at 9:42 am - Reply
Chantel, EasyWeed® Stretch would be your best choice, but EasyWeed® will work too. The “cotton” setting on your iron should be suitable. Check out this video for more iron on tips.
Myrna February 2, 2018 at 10:43 am - Reply
What HTV would you recommend for a white 100% polyester jacket with inside mesh/vent lining and at what heat press setting? Thank you.
Lily February 2, 2018 at 3:54 pm - Reply
Hi Myrna, any of our HTV’s can be applied to 100% polyester. If you don’t have an extra garment to test the standard suggested application settings, then I’d go with the lower temperature of 280°F and add 5-10 seconds pressing time just to be on the safe side.
Myrna February 3, 2018 at 1:56 pm - Reply
Thank you for responding.
Jose Campos May 2, 2019 at 10:16 pm - Reply
Hi
I have a problem with getting this vinyl to stick onto a 100% Polyester Jersey. I pressed at regular time and heat and it burned, I also tried lower heat long time but it either burned or came off after a wash. Any suggestions?Lily May 3, 2019 at 11:23 am
Hello! Please check the tag of the garment for heat sensitive indicators like “do not iron or cool iron only.” Some polyester is prone to scorching and will typically have one of the two listed on the tag. You can try lowering your temperature to 270°F for 15-20 seconds of pressing time, but unfortunately some polyester is not compatible with heat application.
Kaleb February 9, 2018 at 3:02 pm - Reply
Hi what would you recommend for 74% Polyester 26%Viscose shirts. (Will also be washed a lot as they’re soccer jerseys).
I use a heat press, but never used these type of shirts.
Thank you :)Lily February 12, 2018 at 9:36 am - Reply
Hi Kaleb! EasyWeed® or EasyWeed® Stretch would both be suitable. If they’re particularly stretchy garments, I’d go with EasyWeed Stretch, but just remember Stretch likes a little firmer pressure than standard EasyWeed. Another cost effective option that’s durable would be CADFlex.
Heather February 12, 2018 at 12:43 pm - Reply
Ive been asked to put a school logo on blankets, they are 100% waterproof polyester with an oxford backing. is this possible?
Lily February 13, 2018 at 10:54 am - Reply
Hi Heather! I’d try decorating the oxford side, since the waterproof coating would have to be removed from the polyester. If the HTV doesn’t stick after pressing, there may still be a coating interfering. An HTV remover like methylene chloride can be used to remove the coating from the application area. If you can get your hands on a blanket to test, I’d definitely recommend trying out these methods first to see what works best for you.
Cori Taylor February 13, 2018 at 10:12 am - Reply
What is the lowest temperature that the glitter HTV can be applied at? Having issues with scorch marks on some sweatshirts when applying the glitter HTV.
Lily February 13, 2018 at 10:54 am - Reply
Hi Cori! We recommend applying Glitter HTV no lower than 280°F. It can be applied at a lower temperature but the pressing time becomes quite lengthy.
darleen February 27, 2018 at 10:34 am - Reply
With Bridesmaids robes 98% polyester and 2% spandex can I apply HTV initials using a heat press?
Lily February 28, 2018 at 8:54 am - Reply
Yes! You may be able to use the standard recommended temperature and time settings depending on how sensitive the polyester is. I’d suggest heat pressing a bit of the robe to see how it reacts to the higher heat. If any discoloring occurs, then use the application method described in this blog post, otherwise you’re good to go!
Melissa Free February 27, 2018 at 2:32 pm - Reply
Can I put Easyweed on a Non-Woven Polypropylene using the lower temp settings?
Lily February 27, 2018 at 4:11 pm - Reply
Sure can, Melissa! We actually decorate the same kind of bags with EasyWeed as show giveaways. When we make ours the heat press is set to 270°F with medium pressure. A 10 second press is usually sufficient, but we’ll tack on another 5 if there is any lifting HTV.
Betty Wells March 2, 2018 at 10:32 am - Reply
I have shirts to put logo on. What type of htv should I use on 100% polyester and then one is 62% polyester, 33% rayon, 5% spandex, and one is 91% polyester, 9% spandex. Thanks for your help.
Lily March 5, 2018 at 9:37 am - Reply
Hi Betty, the 100% polyester is fine for any Siser® heat transfer vinyl, although our most popular are EasyWeed and Glitter. Since the other shirts have spandex in them, I’d suggest EasyWeed Stretch for best results. Although, regular EasyWeed could still be applied.
Kristin Niare December 3, 2023 at 10:31 pm - Reply
Can you apply Siser Glitter HTV to 50/50 cotton blen
Lily December 4, 2023 at 8:43 am - Reply
Yes, you can!
Susan Chavez March 3, 2018 at 11:26 am - Reply
Can you apply HTV to 13 oz banner material? I have EasyWeed.
Lily March 5, 2018 at 9:26 am - Reply
Hi Susan! A 13 oz banner may melt even at a low application temperature of 270-280°F. Instead of HTV, I’d suggest using EasyPSV™ Permanent which is an adhesive vinyl.
Cristina Jones June 3, 2019 at 2:43 pm - Reply
Would this apply to a flag material as well? Or do I use htv? Thank you!
Jodi March 5, 2018 at 9:30 am - Reply
HI Lily – I love your projects! I have been asked to customize the sleeves of some performance wear shirts that are 60% Nylon, 37% Polyester and 3% x-static nylon. Can you recommend which Siser HTV product I should use? Thanks!
Lily March 5, 2018 at 4:21 pm - Reply
Hi Jodi! Thanks for reading :) Since the garment contains a high percentage of nylon you’ll definitely need to use EasyWeed Extra for the HTV to stick. The adhesive on our other EasyWeed products just won’t cut it when it comes to nylon. However, you can layer other EasyWeed products on top of EasyWeed Extra if you need to use a color that isn’t offered in the EasyWeed Extra line.
Abby March 12, 2018 at 11:18 pm - Reply
Which recommended brand of EasyWeed should be used for women’s swimwear consisting of 82% Nylon and 18% Spandex?
Lily March 13, 2018 at 8:23 am - Reply
Hi Abby! Nylon always requires EasyWeed® Extra. Please be aware though, that consistent exposure to chlorine over time will cause the HTV to become brittle sooner than usual.
Susan March 15, 2018 at 11:07 pm - Reply
What would i need
to use on microfiber fishing towels thank youLily March 16, 2018 at 8:46 am - Reply
Hi Susan, since microfiber has a low pile, you could use any kind of EasyWeed® product or even Glitter HTV if you wanted to. I’d suggest double checking the tag though to see if there’s any clues it will be heat sensitive. If you have an extra, try pressing it at the recommended settings, and if the fabric discolors, use the application method described in this post.
Jolene March 17, 2018 at 1:45 am - Reply
Thank you so much! I used 8 different colors on a shirt that was 95% polyester, 5% spandex – a Lularoe shirt. It clearly stated not to use an iron or I would be “really sad”. It came out GORGEOUS…didn’t damage the shirt at all.
Ella February 17, 2022 at 2:11 pm - Reply
Hi Jolene. What kind of transfer paper did you use? I am currently trying to decided what to use for a romper that is 95% poly 5% spandex
Lily March 26, 2018 at 11:16 am - Reply
Hi Justin! EasyWeed® Extra is actually no thicker than regular EasyWeed. Extra just has a super strength adhesive for nylon fabrics. When pressing on mesh jerseys, regular EasyWeed or even Stretch will do nicely. Just make sure to place a heat transfer pillow inside the shirt to prevent adhesive leaking through the mesh and bonding the sides of the shirt together.
Lily March 30, 2018 at 3:21 pm - Reply
Hi Mandy! Yes, HTV can be applied to yard flags. However, you’ll want to use EasyWeed® Extra, since your flag contains nylon. Standard EasyWeed won’t stick. Additionally, the constant exposure to outdoor elements can cause the HTV to wear quicker, but this will also depend on your climate. For heat application, I’d suggest using the low temperature of 275-280°F with medium pressure, and a pressing time of 20-25 seconds to avoid melting the polyester/nylon blend.
Brittnee Ware April 4, 2018 at 12:44 pm - Reply
Hi,
Can you HTV to Chiffon? I am a newbie :)
Lily April 5, 2018 at 2:48 pm - Reply
Hello! Yes, HTV can be applied to chiffon. However, the fabric is likely heat sensitive so you’ll want to use a lower setting on your iron and increase your pressing time in order to apply the HTV without harming the chiffon.
Shelli April 12, 2018 at 6:09 am - Reply
I have a customer that wants htv applied to a couple of microfiber pillows. They dont have any tags on them, nor do the cases come off. Is it safe to apply? I dont want to risk ruining their pillows.
ThanksLily April 12, 2018 at 2:14 pm - Reply
Hi Shelli! Hmm, that sounds like it could be risky business. I would definitely use a low temperature setting (270°F or the Polyester setting on an iron) and try to test press a small area with just the heating element (no HTV yet.) If the fabric isn’t harmed then you should be safe to apply the heat transfer vinyl.
Jeri April 16, 2018 at 1:58 pm - Reply
I have a customer who requested a monogram on Ruffle Girl capri set. The material is 95% cotton and 5% spandex. What heat setting do you recommend on a heat press?
Lily April 17, 2018 at 8:57 am - Reply
Hey Jeri :) Cotton can handle our recommended settings for any HTV. For example, you could use any product from the EasyWeed® line which applies at 305°F or you could use products that apply at 320°F like Glitter and Holographic. When decorating cotton, the HTV product (and not the fabric) dictates the application temperature.
Christina March 24, 2024 at 3:12 pm - Reply
Hello can you put htv on a 80% acrylic, 17%polyester, 3% spandex. It’s a sport sock and it stays it has high wicking material?
Lily March 25, 2024 at 10:11 am - Reply
Hi Christina! Yes, you can apply HTV on that type of fabric blend.
Karen April 25, 2018 at 10:23 am - Reply
I would like to use EasyWeed Extra on 87% Nylon / 13% Spandex pants. I see this is the right HTV for the job. I’m wondering since you advise using it on swimsuits and other stretchy materials, does it have any stretch to it? Can I use large designs or should they be small so the surrounding materials can stretch?
Lily April 25, 2018 at 12:20 pm - Reply
Hi Karen! EasyWeed® Extra is similar to standard EasyWeed when it comes to the amount of stretch and elasticity in the material. If you make large designs, I’d suggest breaking apart your artwork as much as possible (avoid large chunks of HTV in the design) to allow for more stretch. This will also create a softer hand on the garment and avoids the “plastic sticker” feeling some attribute to vinyl.
Marie April 27, 2018 at 10:12 pm - Reply
What is the best HTV for outdoor polyester flags?
Lily May 1, 2018 at 4:30 pm - Reply
Hi Marie! EasyWeed® Extra has the strongest adhesive for outdoor applications. Other EasyWeed products can be layered on top for more color possibilities. However, please be aware that HTV is not intended for consistent exposure to the outdoor elements, and the longevity can be negatively effected.
Laura May 1, 2018 at 5:06 pm - Reply
Hi,
I’m am trying to apply HTV to the material of an Easy Up tent. The material is 420D UV polyester. I’ve read a lot of comments about lowering the temp for polyester in general so with doing that, should it adhere to it? Will the UV part of it affect it at all?
Also, what would be the best type of HTV to use for it?
Thank you!
Lily May 2, 2018 at 9:25 am - Reply
Hi, Laura thanks for reading! As long as you increase your pressing time the HTV will adhere when using a lower temperature. However, the UV coating may need to be removed with methylene chloride in the area you want to decorate for it to stick. Please keep in mind, that HTV is not intended for outdoor use and consistent exposure to the elements can negatively affect heat transfer vinyl’s longevity.
Michelle May 8, 2018 at 2:04 pm - Reply
Hi
I have some vinyl garment bags
Is there any low temp HTV that I could use with my heat press?Lily May 9, 2018 at 1:14 pm - Reply
Hi Michelle! We don’t have one specific “low temp HTV” however all Siser heat transfer vinyl can be applied at the low temperature of 270-280°F when you increase your pressing time 10-15 seconds.
Julia May 9, 2018 at 8:11 am - Reply
Hi Lilly,
I’m wanting to apply glitter and or regular htv or whatever you suggest to a women’s top that is 58% cotton, 39% modal, 3% spandex jersey. What is the best instructions for applying without scorching or what material should I use to put my graphic design on it? I also may want to use HeatnBond on material with the htv. What advice do you have for using cotton material with the htv?
Lily May 9, 2018 at 1:20 pm - Reply
Hi Julia! I’d suggest reading this blog post since Modal is similar to rayon. You could use any HTV at 270-280°F and add 5-10 seconds to your pressing time. If the shirt is very stretchy, EasyWeed® Stretch will give the best results. As for the cotton and the HeatnBond, the standard application settings for the HTV you choose will be fine for those materials.
Joanne May 11, 2018 at 10:16 am - Reply
Hi Lilly, I’m making bridal t-shirts and wondered how htv would holdcup on 95% modal polyester and 5% spandex? There’s quite a few areas on the shirts that will have glitter also. Any feedback would be greatly appreciated!
Lily May 14, 2018 at 9:49 am - Reply
Hi Joanne! Glitter HTV will adhere to a modal polyester/spandex blend. However, keep in mind that the HTV doesn’t have a lot of stretch to it, so if you’re doing full front chest designs, you may want to go up a size on the shirts. Additionally, the fabric is likely heat sensitive. You can check by applying heat with your iron/heat press on an inconspicuous area of the shirt. The test will help you decide if you should stick with the standard recommended application settings, or if you should use the method mentioned in this post.
Alisha November 19, 2022 at 2:02 pm - Reply
Hi Lily,
I would like to ask if i can apply htv on a doormat? It is made from polyester. and can i apply htv on foam i need to personalize a lightening stick made from foam.
Lily November 21, 2022 at 10:12 am - Reply
Hi Alisha! Yes, you can apply HTV to a polyester doormat, however if the poly is a light color you may also want to consider using sublimation ink or markers for a more seamless decoration. As far as a foam, lightning stick I would suggest using EasyPSV so you don’t melt the foam with the heat needed to apply HTV.
Crystal May 11, 2018 at 1:15 pm - Reply
Hi would you happen to know if I can apply the glitter htv to a 100% polyester t-shirt?
Lily May 14, 2018 at 9:22 am - Reply
Hi Crystal! Glitter HTV will have no problem sticking to polyester. You may want to double check the polyester for heat sensitivity before decorating though. Use your iron/heat press to apply heat to an inconspicuous area of the shirt and see how the fabric reacts. The test will help you decide if you should stick with the standard recommended application settings, or if you should use the method mentioned in this post.
Crystal May 14, 2018 at 10:13 am - Reply
Thank you! I will check & see.
Juanita Scott May 16, 2018 at 12:23 pm - Reply
Hi Lily … You are a Godsend with all of your great advice !!! I checked to make sure I wasn’t asking a previously covered question (hope I didn’t miss it :D ) …. My question: I want to decorate some Swing Tops that are 55% Poly, 40% Rayon, and 5% Spandex. Can this be done … and what type of HTV for best results, temperature and time? …. Thank you so much !!!
Lily May 17, 2018 at 9:20 am - Reply
Thanks for reading, Juanita! For your tops, EasyWeed® Stretch will give best results on a stretchy blend like that. This blog post goes over how to heat press rayon with Stretch and may be helpful to you. Make sure to use firm pressure with Stretch and you may need to use a lower temperature like 280°F and increase your pressing time to 15-20 seconds in order to avoid heat marks on the fabric.
Tina Fridrich May 22, 2018 at 9:01 pm - Reply
I am getting ready to use Siser HTV on UnderArmor dry fit shirts for the first time. I am nervous because the shirts are so expensive, I cannot afford to mess up! (I am used to doing triblend and cotton shirts at 320 for 20 seconds on my heat press and then pressing again after peeling for 10 more seconds or until I see the fibers of the fabric through the transfer.) For this 100% poly, what temp works best and for how long? How will I know it has adhered well?
Lily May 23, 2018 at 11:18 am - Reply
Hi Tina! I would suggest erring on the side of caution with your Under Armor garments by using a lower temperature setting like 280°F. Press for 15-20 seconds and then you can peel the carrier. An additional press after that is not necessary unless some of the vinyl is visibly lifting. You may want to watch this video that explains why seeing the weave of the fabric through HTV is not actually the best practice. Hope that helps, and good luck with your project!
Sharon Perkins May 30, 2018 at 10:43 am - Reply
What type of HTV would be best for velvet wine bags?
Lily May 30, 2018 at 2:45 pm - Reply
Hi Sharon! I decorated some mini velvet bags in this post with several different kinds of HTV. It’s really up to your preference since they all will adhere. Just keep in mind that the velvet texture may show throw the thinner vinyls (like EasyWeed and Stretch) but using a thicker or textured vinyl (ie Glitter, Holographic, StripFlock) will hide the velvet texture.
stephanie May 30, 2018 at 7:54 pm - Reply
can i use htv vinyl on a Fire Resistant shirt? if so what kind
Lily May 31, 2018 at 2:10 pm - Reply
Hi Stephanie! Siser heat transfer vinyls adhere to many fabric blends, however if the fabric is a nylon blend then you must use EasyWeed Extra for it to stick. Please keep in consideration though, that Siser heat transfer vinyl is not flame resistant or retardant.
kathy bernard June 4, 2018 at 10:01 pm - Reply
Hi , I have a shirt that is air dry and 100% polyester. Can you put HTV on it and us the heat press?
Lily June 5, 2018 at 10:04 am - Reply
Hi Kathy! If the garment tag says “air dry” or “cool iron” it’s likely heat sensitive. You can still decorate it with HTV, but I’d suggest using the method in this post (lower temperature and increased pressing time.) You’ll still get great results using this method, especially with a heat press.
Stephanie Rabon June 5, 2018 at 9:13 pm - Reply
Hello! I have someone wants glitter HTV put on a 100% Polyester with Polyurethane coating backpack. Is it safe to use following the lower heat method?
Lily June 6, 2018 at 11:16 am - Reply
Hi Stephanie! Yes, the lower heat method will work with that type of backpack. You may want to test press a small piece of Glitter HTV on an inconspicuous area of the backpack to see if the 15-20 second press time is sufficient. Since Glitter is a thicker HTV you may need to press for another 5 seconds.
jessica espinoza June 6, 2018 at 6:45 pm - Reply
can you put HTV on 100% nylon Dazzle
Lily June 7, 2018 at 10:26 am - Reply
Yes, you can! You will need EasyWeed Extra since it’s made specifically for decorating nylon. Other heat transfer vinyls don’t stick to nylon.
Reanna Krogsdale June 6, 2018 at 9:09 pm - Reply
I have a table cloth coming on Friday that I need to put a logo on Friday night. It is 100% polyester. I can’t afford money or time if it gets ruined. Can I use normal htv and heat press on a lower temp? Its a fitted cloth so not really the normal decorated pleats
Lily June 7, 2018 at 10:31 am - Reply
Hi Reanna! Since you only have one shot at it, I’d definitely stick with the lower temp method. Some 100% polyester isn’t negativity effected from the heat, but in your case it would be best to be cautious. Lowering your temperature and increasing your pressing time will do the trick. Good luck with your project!
megan June 8, 2018 at 10:54 pm - Reply
Hello, I have a set of Micro suede pillows, which settings do you recommend or is this even doable?
Lily June 12, 2018 at 11:21 am - Reply
Hi Megan! We’ve applied EasyWeed® HTV to micro suede before. However, this fabric can vary in heat sensitivity. If you can, test press an inconspicuous area or extra pillow to see how your suede reacts to 305°F. If you don’t have an extra to spare, I’d suggest erring on the side of caution and using the 280°F and 15-20 second application method in this post.
Debbie June 9, 2018 at 9:31 am - Reply
I have a tube towel which is microfiber suede blend of 70% polyester and 30% polyamide. Can I put HTV on this with a Heat Press and if so what temp setting should I use?
Lily June 12, 2018 at 11:18 am - Reply
Hi Debbie! Since polyamide has nylon in it, you’ll need to use EasyWeed® Extra to decorate the tube towel. It would be best if you had an extra towel to test press with the standard application settings. Otherwise, I’d suggest using the low temp application method outlined in this post.
Brittney June 9, 2018 at 7:09 pm - Reply
Can I add regular htv to a quilted bag? I wasn’t sure what it would do on the seams. Its a large logo.
Lily June 12, 2018 at 11:11 am - Reply
Hi Brittney! Yes, you can, but I’d recommend using a heat transfer pillow under the quilting to even out the pressure . With a pillow, the HTV will be able to adhere to the seams in the crevice areas.
Nikki June 15, 2018 at 3:49 pm - Reply
looking to create key chains made of polypropylene webbing belt like material…I see above you can do this on lower temp settings but which Siser product do you recommend?
Lily June 19, 2018 at 9:08 am - Reply
Hi Nikki! EasyWeed® products would do best on polypropylene.
Jennifer June 20, 2018 at 8:47 pm - Reply
Hello What kind of vinyl would work for oxford material. To put on a fanny pack?
Lily June 25, 2018 at 10:38 am - Reply
Hi Jennifer! You can take your pick of HTV to decorate oxford material. Just use the suggested application settings that can be found on the Siser website and app. You will also likely need to use a heat transfer pillow inside the fanny pack in order to have even pressure on the HTV.
debra jones June 21, 2018 at 11:07 am - Reply
I have some aprons that are 100% spun polyester. Using siser easyweed at a lower temp as 280 and increasing time
will this adhere the htv? I tried it on one and it did not stick. Suggestions? or should I use something different?Lily June 25, 2018 at 10:29 am - Reply
Hi Debra! When applying EasyWeed HTV at 280°F, a pressing time of 20-25 seconds should be sufficient. If the HTV is still not sticking, you may be experiencing a pressure problem. Use a heat transfer pillow to raise the application area above any seams, and try pressing again.
Amalia Kinney June 21, 2018 at 7:50 pm - Reply
I put HTV logo on 100% polyester Athletic shirt with
Reflective and UV Protection. The setting the heat press was on 275° and pressed for 15 seconds. But I had to press it multiple times because it wasn’t sticking to the material.
After the customer went to splash pad the lettering came off. What do I need to do or change to fix the shirt?Keith June 22, 2018 at 9:41 am - Reply
Amalia, I have forwarded your issue and email address on to our support department. They will be able to help you resolve your issues.
Mary Pennington July 9, 2018 at 6:41 pm - Reply
I need to put htv on uv protected hat and was wondering how. Can I get a copy of what the tech team says or can it be posted? Thanks
Lily July 11, 2018 at 8:23 am - Reply
Hi Mary! Our tech support says that UV protected garments have not presented issues with application. However, they do caution that UV protected garments are often made of heat sensitive polyester. You may want to use the lower heat method I used in this post unless you know for sure that the fabric is not going to discolor from the standard heat settings.
Amalia Kinney June 22, 2018 at 9:50 pm - Reply
Hi Keith,
Thank you so much!Daniel Violette June 25, 2018 at 2:52 pm - Reply
What would the heat press settings be for velvet drawstring ring pouches?
Lily June 27, 2018 at 9:14 am - Reply
Hi Daniel! I decorated some velvet drawstring pouches in this post with the EasyPress. For a heat press, I’d recommend sticking to 305°F and increasing your pressing time by 5 seconds if you’re using a thicker vinyl (like Holographic, StripFlock, or Glitter.) Keep in mind the pressure from the heat press will smash down the velvet fibers during the application process. But they can always be re-fluffed after decorating with HTV and will look good as new!
Lupita June 27, 2018 at 12:43 am - Reply
I am doing my first reversible 100% polyester mesh jersey. I will be putting the last names on both sides. What would you recommend for me to use? How long and what temp should I use on it? I’m worried that the fabric will get stuck together through the holes of the jersey. Please help me!
Lily June 27, 2018 at 9:24 am - Reply
Hi Lupita! For a project like this I’d go with EasyWeed. If you’re unable to test press the garment to determine if it’s heat sensitive then I would recommend using the lower temperature method from this post. Bring your heat press temp down to 280° (on a home iron use the polyester or rayon setting) and increase your pressing time 5-10 seconds. To prevent the sides of your jersey sticking together, place a heat transfer pillow within it. If you don’t have a pillow, you can use a folded towel.
Lupita June 27, 2018 at 5:54 pm - Reply
Thank you so much. One more question, what would you recommend for the wash process?
Thank you ?
Lupita June 27, 2018 at 5:52 pm - Reply
Thank you! One more question. What would you recommend for the washing process?
Lily July 5, 2018 at 9:20 am - Reply
For best wash results:
Wait 24 hours before 1st wash
Machine wash warm or cold / mild with detergent
Dry on normal dryer setting
Avoid liquid fabric softeners
Dakota July 5, 2018 at 9:37 am - Reply
I need to apply HTV to a large space on a shower curtain which is 100% polyester and says Do Not Iron. The polyester is white. I am afraid of any discoloration or harming the material. What do you recommend? How long to press and temperature? Thank you!
Lily July 6, 2018 at 9:13 am - Reply
Hi Dakota! With a large project like that, I’d suggest heat pressing a small inconspicuous area to see how it reacts to the 280°F heat (like I used in this post.) If the fabric seems unaffected, then you should be fine to heat press HTV at 280°F for 20-25 seconds. We used the same method when applying EasyWeed® Stretch to Rayon in this post.
Brooke July 9, 2018 at 9:48 am - Reply
hey! I have a tank top that I want to make using Easy Weed Vinyl but the tank is made out of this: 65% Polyester and 35% Viscose. I was wondering if I can use easy weed on this. If so what temperature and time is needed using the heat press?
Lily July 10, 2018 at 8:28 am - Reply
Hi Brooke! Yes, you can use EasyWeed® on a polyester/viscose blend tank top. Viscose is similar to rayon, so I’d suggest using the lower temperature application method from the How to Heat Press Rayon post. Set your heat press to 280°F and press for 15-20 seconds.
Sweety July 9, 2018 at 2:59 pm - Reply
Hi! I have some workout shirts I would like to apply HTV. Will it work on shirts with these materials? 80% Polyester + 20% Elasterell, 92% Polyester + 8% Spandex, 88% Polyester + 12% Spandex. Thanks so much!! Sweety :)
Lily July 10, 2018 at 8:49 am - Reply
Hi Sweety! Yes, HTV can be applied to those materials! However, I’d suggest using EasyWeed® Stretch for best results. This blog post shows how to apply EasyWeed® Stretch.
Lorri James July 10, 2018 at 2:01 pm - Reply
Can you put HTV on a mesh (safety) vest?
Lily July 11, 2018 at 8:34 am - Reply
Yes, you can Lorri! But depending on the fabric content you may need to use the lower temperature method from this post. If you know the fabric can withstand the standard heat settings then you can use those. Either way, the most important thing to remember is to place a heat transfer pillow inside (between the two layers of mesh) to prevent the HTV adhesive from sealing the front of the vest to the back. A heat transfer cover sheet or parchment paper inside will do the trick as well.
Alice July 13, 2018 at 4:02 pm - Reply
Hi There! I am wanting to use some Glitter JTV on a backpack for my little girl that I am getting from Pottery Barn, it says the material is – Made from rugged, water-resistant 600-denier polyester, will it work on this material and if so, any advise on heat setting and time?
Lily July 16, 2018 at 9:12 am - Reply
Hi Alice! Siser heat transfer vinyl can be applied to 600 denier polyester with the lower temperature method explained in this post (280°F for 15-20 seconds) and you’ll likely want to use a heat transfer pillow or rolled up towel to achieve even pressure. It’s the “water-resistant” bit that may complicate matters. If you’re able to, I’d suggest test pressing EasyWeed® Extra on an inconspicuous area (like the bottom of the bag or inner side of a strap) to see if it will adhere. EasyWeed Extra can decorate most coated fabrics, however if it won’t stick then you’ll have to take a few more steps before decorating the backpack. Watch this video to see how you can decorate waterproof fabrics with Siser HTV.
Kelly July 17, 2018 at 5:35 am - Reply
Hi!
I have a coated canvas tote bag (cotton with a pvc coating) that I would like to customize with HTV. Is this possible? If so, can you please advise regarding time and temperature? I would not want to melt the coating. Thank you!Lily July 17, 2018 at 10:38 am - Reply
Hi Kelly! With a PVC coating, you do have the possibility of melting the material. I would suggest using the lower temperature method from this post (280°F for 15-20 seconds) and heat applying a small area to see how the fabric reacts before pressing your full design.
Daneen July 18, 2018 at 7:11 pm - Reply
I have a shirt that is 95% rayon, 5% spandex will siser metal work ok on this shirt as long as I use a lower temperature? Thanks.
Lily July 19, 2018 at 11:39 am - Reply
Yes, Metal HTV can be applied using the lower temperature method as well! Good luck with your project, Daneen :)
Shani July 19, 2018 at 5:33 pm - Reply
Can I applu HTV to a school backpack made of 100% polyester?
Lily July 20, 2018 at 12:03 pm - Reply
Hi Shani! Yes, HTV can be applied to a 100% polyester backpack. It’s likely the the backpack is not heat sensitive, but you’ll still want to check by test pressing an inconspicuous area. If there’s no discoloring, then you’ll be safe to use the standard recommended heat application settings. If the polyester shows any negative effects from the high heat, then it’s best to go with the lower heat application method described in this blog post (280°F for 15-20 seconds.)
Sarah C July 20, 2018 at 7:44 pm - Reply
For applying to gymnastics leotards that are shiny and are Body: 85% Nylon and 15% Spandex, Lining: 95% Polyester 5% Spandex, doesn’t mention no iron but says no dry cleaning. Can I use Easyweed Stretch to apply a team logo without having it come off?
Lily July 23, 2018 at 5:07 pm - Reply
Hi Sarah! Unfortunately, since the fabric has a high nylon content, EasyWeed® Stretch is not going to be suitable. EasyWeed Extra will adhere to the fabric, but it is not going to stretch with the spandex. If you’d still like to decorate the leotard, I’d suggesting heating a small area to see if the recommended 305°F has any negative affects. If so, use the lower temp method (280°F for 15-20 seconds) in this post.
Valerie Pettigrew July 25, 2018 at 12:36 pm - Reply
I have been asked to put vinyl on color guard flags (for marching band). The material looks to be China silk (polyester). Can you recommend a vinyl that would work best with this? The flags will be whipped around a lot, so I am not sure if anything will really stick on there.
Lily July 26, 2018 at 3:51 pm - Reply
Hi Valerie! EasyWeed will apply to china silk (polyester) flags and will have no problem being whipped around if applied properly. However, I’d suggest testing a small corner of the fabric to see how it reacts to the recommended 305°F heat. If no discoloring or melting occurs you can use the standard heat application settings. If there’s adverse effects, you’ll want to use the lower heat method from this post (280°F for 15-20 seconds.)
Leah July 25, 2018 at 5:54 pm - Reply
Hi there!
I would like to print a logo on some life jackets. The material is 400 denier nylon fabric. I have regular Siser Easyweed vinyl. Is this an acceptable transfer to use on these life jackets? Thanks so much!Lily July 26, 2018 at 10:33 am - Reply
Hi Leah! Nylon can only be decorated with EasyWeed® Extra. The adhesive on standard EasyWeed® will not stick to nylon. However, you can layer EasyWeed on top of EasyWeed Extra for more color options.
Donna Sanderson July 27, 2018 at 3:26 pm - Reply
Hello… I’m wanting to know if you can use Siser HTV on smooth outdoor banner material? I understand I would had to use my heat transfer cover sheet during application, and would have to press in sections.
I’ve been looking through past comments here, but couldn’t find this question.
Thanks in advance for your help!Lily July 30, 2018 at 8:31 am - Reply
Hi Donna! If your banner material feels like plastic or vinyl then I’d suggest using EasyPSV™ Permanent since it’s made to withstand exposure to sun and other outdoor elements unlike heat transfer vinyl. If this is not the type of banner you have, please let me know the fiber content of the material so I can best advise you. Thanks for reading the Siser Blog!
Debby July 27, 2018 at 9:28 pm - Reply
I have a T-shirt 56%cotton 38%modal which I think is polyester, 6%spandex.. can I use easy weed & a Teflon sheet and if so would I set it on at 305 for 15 sec. ? If not what do Use? Thanks
Lily July 30, 2018 at 8:36 am - Reply
Hi Debby! Modal is a lot like rayon, and may discolor from the heat of 305°F. If you’re able to, test a small area of the shirt for discoloring before applying any HTV. If discoloring occurs, follow the steps in the how to heat press rayon blog post. You may also want to consider using EasyWeed® Stretch because of the spandex content, but EasyWeed® will work too! Additionally, parchment paper will hold less heat than a teflon sheet and if the garment is particularly heat sensitive you may want to try the paper. Good luck with your project and thanks for reading :)
Tosha Vecchio July 29, 2018 at 1:17 pm - Reply
Hello. I just bought some lunch boxes and they have a Rhino-Tech water proof and stain proof exterior. Can it be heat pressed and if so which type of Siser HTV should be used on it? Thank you for your time
Lily July 30, 2018 at 8:44 am - Reply
Hi Tosha! Yes, you can decorate a lunch box with with Siser HTV. However, since the fabric is coated you’ll either need to use EasyWeed® Extra or follow the steps in this video to remove the waterproof coating on the application area in order to decorate with EasyWeed®. Also keep in mind that you’ll need to use the lower temp method when applying HTV to ensure the cooler liner doesn’t melt.
Rachel August 4, 2018 at 9:21 am - Reply
hello! I am getting ready to do some business shirts with their logo on the back of the shirt. It’s a pool company so they are outdoors and in the sun a lot. I am trying to find the best htv that can withstand the weather the best. The shirts are 100% micro-polyester. thanks!!
Lily August 7, 2018 at 9:11 am - Reply
Hi Rachel! You can use EasyWeed® on 100% micro-polyester, but unfortunately no matter the HTV you choose, they’ll all eventually break down from the sun exposure. Contact with chlorine will also negatively affect the vinyl’s longevity. I’d recommend hang drying to prolong the life of the garment.
Rachel August 7, 2018 at 5:28 pm - Reply
Thank you!
LeAnne August 8, 2018 at 6:57 pm - Reply
I just applied an Easy Weed Glitter to a sweatshirt with an iron. It was my first time, and i fear I didn’t heat it long enough. I seem to fear that I will melt it. Is it possible to go back and “re-heat” it with a silicone cover? It hasn’t been worn or washed yet.
Lily August 9, 2018 at 8:37 am - Reply
Hi LeAnne! Yes, you can go back and re-press areas that are not stuck down. I’d recommend pressing 5 seconds at a time with a cover sheet on top of the HTV. However, if you followed all the heat application instructions and the Glitter isn’t noticeably lifting away from the fabric, you should be safe to wash it. You can always go back after washing and re-press any area that may have lifted.
Shirley Loar August 9, 2018 at 2:02 pm - Reply
Hi Lily, Just read thru your Q&A in hopes of finding an answer to my question. Your info is great on so many things! Here is my question: I just purchased a pair of NIKE running shoes and want to change the swoosh from neon to Siser glitter HTV Rose Gold. No heat press just my iron. The shoes are made of “Engineered Mesh”. I googled that and got this answer…
What is mesh material in shoes?
It can be made from polypropylene, polyethylene, nylon, PVC or PTFE. A metal mesh may be woven, knitted, welded, expanded, photo-chemically etched or electroformed (screen filter) from steel or other metals. In clothing, mesh is loosely woven or knitted fabric that has a large number of closely spaced holes.So I’m not sure what the mesh is made of. I cannot afford to buy a practice pair of shoes, but am open to your suggestions.
Thanks in advance for your help!Lily August 9, 2018 at 5:17 pm - Reply
Hi Shirley! If the mesh is nylon or coated, then it’s possible the Glitter HTV will not stick. The only HTV that sticks to coated fabrics and nylon is EasyWeed® Extra. If you’d still like to try it, I’d use the setting a step or 2 below Cotton on your iron, stuff the shoes with a heat transfer pillow, and use some kind of heat safe tape to keep your Glitter HTV in place while pressing. A heat transfer cover sheet of some kind is definitely necessary, and you’ll need to be cautious to avoid melting the rubber soles. You may want consider using a small craft iron for this project. Good luck!
KELLIE BOWEN August 9, 2018 at 4:40 pm - Reply
Lily!! I have a customer with a 60/40 rayon-poly t-shirt and she wants glitter and regular HTV on it. Would the 280 F for 15-20 sec work for that blend? I presume I would do the matte black easy weed before the glitter correct? Thank you in advance!
KellieLily August 9, 2018 at 5:21 pm - Reply
Kellie, you got it girl! I’d suggest your heat application process goes like this: Tack EasyWeed for 1-5 seconds with cover sheet. Hot peel carrier. Tack Glitter for 1-5 seconds with cover sheet. Warm peel carrier. Replace cover sheet and press for 10-15 seconds. And of course this would be at the 280°F temperature like you said!
KELLIE BOWEN August 9, 2018 at 5:29 pm - Reply
You rock sista gal! Thank you! I will try that! ( I am secretly scared)
Margaret Moore August 10, 2018 at 1:49 pm - Reply
Hi, I am wanting to apply HTV on school supplies….like 3 ring binders, mead 5 star prong folders as well as composition notebooks. I do have a heat press….is this possible at a low temperature and longer press time? My granddaughter is wanting htv glitter, holographic and all the fun stuff. lol
Thank you for all your help….I have read thru most of the above questions and answers and saw nothing on this.
Keith August 15, 2018 at 9:00 am - Reply
Margaret, for the binders, you may want to use our EasyPSV material (https://www.siserna.com/easypsv) We have many colors and even Glitter and chalkboard that can be applied to hard goods. I’m just afraid that if you try to heat apply the binders that the plastic will melt.
Lily August 15, 2018 at 9:26 am - Reply
Hi Margaret! If the school supplies feel more like paper or cardboard then you can apply HTV on them like you said with the lower temperature method since you don’t want to ruin any of your grandaughter’s supplies. I was able to test apply on the journals I decorated in this video, to determine they weren’t heat sensitive so I was able to use the standard recommended time and temperature for Glitter HTV. However, if the material feels more like plastic or vinyl then you’ll want to use EasyPSV™ which is an adhesive vinyl that doesn’t require heat.
Debra Bardani August 10, 2018 at 8:37 pm - Reply
I would like to make a garden flag. The material is nylon ( low heat) which Siser vinyl would be recommended?
Lily August 14, 2018 at 5:59 pm - Reply
Hi Debra! You’re going to need EasyWeed® Extra to decorate nylon. It’s only offered in limited colors, but as long as it’s the bottom layer, you can layer other types of EasyWeed on top!
Shantel Hutchins August 17, 2018 at 8:50 pm - Reply
Hi will glitter Siser HTV apply to 49%modal 48%cotton 3% spandex?
Shantel Hutchins August 18, 2018 at 10:02 am - Reply
Sorry it’s Pima Cotton
Lily August 20, 2018 at 11:26 am - Reply
Hi Shantel! Yes, Siser Glitter HTV can be applied to modal blends. Modal is similar to rayon, so I’d suggest reading the rayon and EasyWeed Stretch blog post for the best application method that can also be used to apply Glitter on your modal garment.
Chaka August 21, 2018 at 11:48 am - Reply
Hello! I’m using a Cricut easy press to attach Siser Glitter HTV. My shirts are a black cotton/poly blend but it looks as though the press is leaving marks/discoloring the shirts. Should I lower the temp? I’m using a teflon sheet between the heat press and the HTV. Thank you!
Lily August 21, 2018 at 3:22 pm - Reply
Hi! Yes, if the press is leaving discolored marks on the shirt, you should try lowering the temperature. With a lower temperature, a longer pressing time is necessary, so I’d suggest adding 5-10 additional seconds to the recommended press time. Also, you may want to try using a piece of parchment paper because it doesn’t hold heat like the teflon will.
Donna T August 22, 2018 at 10:29 pm - Reply
I need to put some HTV on school safety vests that are 100% polyester. The tag says “do not iron” – Is it even possible for me to add HTV to this item? And, if so… do you have suggestions for me?
Thank you for your help in advance!!Lily August 27, 2018 at 11:13 am - Reply
Hi Donna! If the tag says “do not iron” then it’s likely that the fabric is heat sensitive and could possibly melt or discolor when coming in contact with high heat. It may be possible to decorate them with a lower temperature (270-280°F) and a longer pressing time (15-20 seconds). It would be best to have an extra vest you could test apply in order to see how the fabric will react to the heat.
Hailey McMaster August 25, 2018 at 10:40 pm - Reply
Hi there! Any recommendations or experience with applying to a faux suede polyester blend? I’m hoping to use an HTV on some pillows I purchased. Thanks in advance!
Lily August 27, 2018 at 11:33 am - Reply
Hi Hailey! You can decorate faux suede with HTV, however you’ll want to use the lower temperature application method since suede is often heat sensitive. Keep in mind that suede has micro fibers that get smooshed down when applying pressure and heat to the fabric. This is normal and is easily fixed by re-fluffing the fibers with your fingers.
Anna Burciaga September 5, 2018 at 7:23 pm - Reply
Hi, can you please recommend an HTV for a leotard that is 82%Nylon/12% Spandex?? Thank you!
Lily September 7, 2018 at 12:00 pm - Reply
Hi Anna! You’ll need to use EasyWeed® Extra since it is the only HTV Siser® offers that will stick to nylon. Extra is offered in limited colors, but you can layer other colors directly on top.
Andrea Martin September 11, 2018 at 12:53 pm - Reply
Hi, I have a customer asking if we can use vinyl on a flag. Can you press on a flag that is 100% polyester and what would be the best vinyl to use for that project? Thank you!
Lily September 12, 2018 at 8:58 am - Reply
Hi Andrea! All Siser heat transfer vinyls can be applied to 100% polyester, so it’s totally up to your preference! Please note that if the flag is intended for outdoor use, the consistent sun & weather exposure will reduce the HTV’s longevity.
Danielle Walters September 11, 2018 at 5:09 pm - Reply
Hi, is there any siser vinyl that can be heat pressed onto polypropylene grocery bags? And if so at what temperature would be recommended?
Lily September 12, 2018 at 9:01 am - Reply
Hi Danielle! We press polypropylene bags with EasyWeed® products at 275°F for 15 seconds to avoid melting the bags.
Wendy Manning September 11, 2018 at 8:27 pm - Reply
Hi I was wondering if I can use Htv on. A polyester swin parka
Lily September 13, 2018 at 8:37 am - Reply
Hi Wendy! I’d suggest using EasyWeed® Extra since the parka is likely coated. Extra is only offered in limited colors, but you can layer other HTVs on top of it. Your other option is to use your HTV of choice, but first you must remove the coating in the area you want to decorate. You may want to watch this video explaining how to decorate a waterproof polyester jacket with regular EasyWeed®
Raquel De la Garza September 25, 2018 at 12:28 pm - Reply
Hi, what would you recomend to use to apply a logo on 100% polyester safety vest
Keith September 26, 2018 at 8:50 am - Reply
Raquel, for a 100% polyester, we would recommend EasyWeed Extra. https://www.siserna.com/heat-transfer-vinyl/easyweed-extra/
Morgam September 28, 2018 at 11:07 pm - Reply
What would i need to put on an under armour shirt 70% polyester/30% acrylic? And what times/ tempatures? Thank you
Lily October 3, 2018 at 9:02 am - Reply
Hello! For a polyester acrylic blend, you could use your HTV of choice. If you’re unable to test press an inconspicuous area of the garment to see if the fabric is heat sensitive, then I’d suggest using the lower temperature method: 270-280°F and 15-20 seconds of pressing time.
Chris Walworth October 3, 2018 at 8:32 pm - Reply
This may sound like an odd request, but I am hand stoning a men’s suit jacket – for a stage show – that is 55% Dacron Polyester/45% Worsted Wool and the lining is 100% Acetate. My client would like their drag name on the back of the jacket with Siser EasyWeed Glitter Iron On Heat Transfer and then surrounded with rhinestones. Is this possible? If so, what time and temp with a heat press? Thank you
Lily October 4, 2018 at 9:40 am - Reply
Hi Chris! For the Glitter HTV I’d suggest pressing at 280°F for 15 seconds. However, when it comes to rhinestones I’d suggest reaching out to our authorized Siser distributor, The Rhinestone World, for their time and temp recommendations. They’ve mixed these two materials before, and even have a video on the application here.
Mary Brown October 4, 2018 at 6:06 pm - Reply
I have a pillow case that is 100% polyester. I want to put glitter htv on it. What settings do you recommend me trying.
Lily October 8, 2018 at 8:19 am - Reply
Hi Mary! If the polyester pillow case is white then you can use our standard recommended settings for Glitter HTV: 320°F for 10-15 seconds. However, if the pillow case is colored, it could discolor from the high heat of the press. In this case I’d suggest using 275°F for 15-20 seconds.
Helen Philley October 6, 2018 at 5:52 pm - Reply
What type htv would you recommend for a 100% vinyl handbag (it looks like a faux leather to me)? And what heat settings should I use, if this is possible? Thanks in advance!!
Lily October 8, 2018 at 8:15 am - Reply
Hi Helen! EasyWeed® or Glitter HTV would likely work best. I’d suggest using a temperature of 270°F and press for a few seconds at a time to prevent melting the bag. The Rhinestone World has a video tutorial on decorating a faux leather purse that would be a similar application process.
Monica Davis October 8, 2018 at 3:44 pm - Reply
Is easyweed UV Resistant?
Christie October 13, 2018 at 8:28 am - Reply
Hi Lily,
I have three questions. I am new to vinyling. Sorry for all the questions.
#1. Can I apply regular Easyweed to a shirt that is 50% cotton, 25% polyester, 25% rayon, and if so, what time & temp do I use? (305 for 15 seconds or lower it to 280 for 15 seconds because of the rayon)
#2. If I am pressing with regular Easyweed and Glitter on the same design, not layered, which vinyl recommendations do I go with since they are different vinyls? 305 for 15 seconds or 320 for 15 seconds.
#3. If I am pressing a design larger than my press and I move the design over to press the other half of the design, won’t I burn/scorch the vinyl of the half that I have already pressed?
I appreciate so much all of the helpful blogs and responses to all the questions posted. It is so helpful to newbies wanting to get started with vinyl.
Thanks again.
Marci October 15, 2018 at 2:23 pm - Reply
Hi I have a morphsuit my son wants to wear for Halloween and we want to add some vinyl. Its made of polyester, spandex, lycra. What kind of vinyl would this work on??
thanks
Lily October 16, 2018 at 4:04 pm - Reply
Hi Marci! With something as stretchy as a morph suit, you’ll definitely want to go with EasyWeed® Stretch.
Sharon October 16, 2018 at 5:08 pm - Reply
I have a Business name to put on the n=back of a coat that the outer shell is 100% nylon. What is the best HTV and what temp
Thanks SharonKeith October 19, 2018 at 7:46 am - Reply
Sharon, EasyWeed Extra is probably your best bet. We recommend 305° for 10-15 seconds but you will definitely want to test a small piece on an inconspicuous place (inside hem maybe).
Dustin Rhoads October 16, 2018 at 11:01 pm - Reply
What would be recommended on like a wind breaker material? It says 100% polyester but It feels like a wind breaker.
Lily October 25, 2018 at 8:37 am - Reply
Hi Dustin! As long as the wind breaker doesn’t contain any nylon, you can apply your HTV of choice.
SA October 19, 2018 at 6:41 pm - Reply
Hi. You stated cool temp settings for heat transfer on Nylon and other heat sensitive material but did not mention what temperature it should be. So I think it will be just trial and error. Even if the transfer adheres to the fabric how will we know it adhered permanently or temporary? Please advise. Thanks
Keith October 23, 2018 at 2:19 pm - Reply
Every Nylon and heat sensitive fabric is going to be different. We always recommend testing on an inside hem or somewhere out of the way. You can knock the temperature down to about 280° but increase the time to about 20 seconds.
Angel October 20, 2018 at 2:12 pm - Reply
Can I use Siser Easyweed on 300 Denier Oxford polyurethane waterproof material.
ThankyouLily October 25, 2018 at 8:41 am - Reply
Hi Angel! Yes, but to apply HTV you’ll need to remove the waterproof coating in the application area. I’d suggest watching this tutorial before giving it a go.
Leslie October 29, 2018 at 6:32 pm - Reply
Hi. I have mesh basketball jerseys to decorate. What is best Siser material? Will holes show through?
Lily October 30, 2018 at 10:28 am - Reply
Hi Leslie! What is the fabric content of the jersey? Most often they’re polyester, and in that case EasyWeed® is your best choice, but if you want to add some sparkle with Glitter or Holographic- that’s still an option! The key thing to remember when decorating mesh jerseys is to place a heat transfer cover sheet or heat transfer pillow inside the garment (between the front and back of the shirt) to block the warm adhesive and prevent sealing the two side of the garment together.
Danielle Champ October 31, 2018 at 12:25 pm - Reply
Am I able to use siser easyweed stretch on a 100% nylon jersey? Is so what should I put the temperature and time?
Lily November 1, 2018 at 8:05 am - Reply
Hi Danielle! EasyWeed® Extra is the only Siser® HTV that can be applied to nylon. Our recommended temp and time can be found on our website here. If you wanted to use EasyWeed® Stretch for its limited color offerings, you can layer Stretch on top of Extra. In that case, I’d recommend tacking the first layer for 1-5 seconds and pressing the second layer for 10 seconds.
Kate November 1, 2018 at 3:45 pm - Reply
Hello, can you use easyweed HTV on Ripstop Polyester, 210 Denier Polyester or Rilpstop Nylon? Looking to use it on a cinch bag.
Lily November 6, 2018 at 9:00 am - Reply
Hi Kate! You can use EasyWeed® HTV on the polyesters you mentioned, however if you want to apply HTV to nylon you’ll need to use EasyWeed® Extra for it’s extra strength adhesive.
Amy November 10, 2018 at 2:13 am - Reply
How do I avoid scorch marks on performance wear? Also, once they are there, can they be removed?
Lily November 12, 2018 at 8:45 am - Reply
Hi Amy! Unfortunately, scorch marks can not be removed. In the future, they can be avoided by using a low application temperature (270-280°F) for 15-20 seconds. All Siser heat transfer vinyl can be applied at a lower temperature if you use a longer pressing time! If the fabric is very sensitive though, you may want to use parchment paper in place of a teflon cover sheet since the paper doesn’t remain hot after pressing like the teflon will.
Joanne Dozier November 12, 2018 at 10:39 pm - Reply
I am wondering if you can use htv on the fleece robes. I have a customer that wants me to make her a specific design on a robe and since I’ve never done one before I’m not sure how well it will adhere. Any tips or suggestions would be greatly appreciated.
Lily November 13, 2018 at 10:21 am - Reply
Hi Joanne! Fleece is usually polyester and all Siser® heat transfer vinyls can be applied to polyester. However, you may want to apply heat to an inconspicuous area of the robe to ensure it’s not heat sensitive. If the fabric has any negative affects then I’d recommend using the lower heat method from this post, otherwise you can use the standard application. Also, please keep in mind the that fleece’s pile can vary. The larger the pile, the more likely you’ll see the texture of the fabric through a thin TV, like EasyWeed®. You may want to use something thicker like Glitter or StripFlock®.
Jennifer November 15, 2018 at 3:48 pm - Reply
I’d like to make a knitting bag and decorate it, can i put htv on this 600-denier polyester? or am i better off using regular vinyl since i wont be wearing/washing it?
Lily November 19, 2018 at 9:24 am - Reply
Hi Jennifer! For 600-denier polyester, heat transfer vinyl would be your best option. I’d suggest using the low application method (270-280°F for 15-20 seconds) just in case the fabric is heat sensitive.
Lea November 17, 2018 at 1:10 pm - Reply
Hi. I have a customer that wants their company name in buffalo plaid on an acrylic vest. The vest has a 100% nylon lining. The tag says to use a cool iron if needed. Is this even possible?
Lily November 19, 2018 at 9:28 am - Reply
Hi Lea! Since the tag says “cool iron only” it’s likely the acrylic is heat sensitive and may melt or discolor. I’d suggest turning your heat down to 270°F and test pressing a small, inconspicuous area of the vest to see how it reacts. It may be possible to apply HTV at this lower temperature for 15-20 seconds, however it’s possible the vest is too sensitive for heat application.
Dom November 21, 2018 at 1:19 am - Reply
HI I have a 100% Polyester jacket that I want to customize with 2 layer lettering. I have a Cricut hot press but would like to use Siser HTV. Which HTV would you recommend and on what heat setting to avoid heat marks? Thanks
Lily November 21, 2018 at 1:56 pm - Reply
Hi Dom! With 100% polyester, you can use any Siser heat transfer vinyl. If you’re able to, test press an inconspicuous area of the jacket at 340°F (this is the temperature we use on the EasyPress for most Siser HTV.) If the polyester shows no heat mark, then you can press the HTV for 10-15 seconds. If there is a heat mark, lower the temperature to 310-320°F and increase your pressing time to 15-20 seconds. Since you’ll be layering though, you can press the first for 1-5 seconds and the second layer for 10-15 seconds to get that 15-20 second total.
Robyn November 21, 2018 at 6:04 pm - Reply
I’m wanting to put HTV on the bottom of socks…I have found some socks that are 35% wool, 35% polyester, 24% cotton & 5% spandex, is ther an htv I can use for that?
Lily November 27, 2018 at 8:25 am - Reply
Hi Robyn! I’d recommend using EasyWeed® Stretch to decorate the bottom of socks. It will stretch the best with the spandex.
Hannah November 24, 2018 at 1:30 pm - Reply
Hello!
I have a set of polypropylene drawstring bags that I plan on using for Christmas gifts. Can I use Siser Easyweed HTV to personalize these bags? I was thinking about setting my heat press to 275 degrees and pressing for 20-25 seconds?
Lily November 27, 2018 at 8:51 am - Reply
Hi Hannah! You can decorate polypropylene bags with EasyWeed®. I’d suggest pressing at 275°F for 15-20 seconds for best results.
Laura whitman November 28, 2018 at 9:56 pm - Reply
Hi, I have a 100% polyurethane fabric that I’m needing to put a decal on. What vinyl can I use or can I? If so I need help on how to do it (temperature setting, type of htv, etc.). Thank you so much for any feedback
Lily November 29, 2018 at 9:26 am - Reply
Hi Laura! I’d suggest using EasyWeed® HTV and applying at 280°F for 15-20 seconds.
Dawn Crippin December 4, 2018 at 1:57 pm - Reply
Hi Lilly can you tell me what’s the best Siser HTV for can Koozies?
Lily December 5, 2018 at 10:09 am - Reply
Hi Dawn! EasyWeed® Stretch would be best for koozies, but any Siser HTV will work.
ELYCE TECKTIEL December 5, 2018 at 3:21 pm - Reply
Can I use htv on a plastic lined bib?
Lily December 6, 2018 at 9:10 am - Reply
Yes, you can! I used an iron on this bib, but you can use a heat press too. I’d suggest using a heat transfer pillow if using a heat press though, since you can’t target the center like you can with an iron.
Trish Hurley December 5, 2018 at 10:43 pm - Reply
Hi Lily. I have a decorators fabric that is 100% polyester and has been treated with a flame retardant. We want to make throw pillows with names on them. What is the best vinyl to use for this project and what temperature setting do you recommend with a heat press? Do we need heat protectant paper as well? Thanks so much for any advice you can give!
Lily December 7, 2018 at 8:57 am - Reply
Hi Trish! I’d suggest using EasyWeed® and test pressing a pillow case at 305°F for 10-15 seconds to see if it will have a negative reaction to the heat. If it does, you can use 270-280°F for 15-20 seconds. A heat transfer cover sheet or parchment paper on top of the HTV during pressing is recommended.
Kim December 9, 2018 at 5:51 pm - Reply
Hi Lily,
could you recommend which htv to use and temp – I am doing a order of fanny pack for a young dance team. The packs are 100% nylon and would I need an extra barrier to protect the zipperLily December 10, 2018 at 11:07 am - Reply
Hi Kim! Since the fanny packs are nylon, you’ll need to use EasyWeed® Extra (at least as your base layer.) Since nylon can be heat sensitive, I’d suggest pressing (with a heat transfer pillow inside the fanny pack) at 270°F for 15-20 seconds (with a heat transfer cover heat on top.)
Jennifer Kohm December 14, 2018 at 1:48 pm - Reply
Hey! Doing silver stretch HTV and the tank is 52% linen and 47% polyester. What settings would I use with an easy press?
Lily December 14, 2018 at 2:52 pm - Reply
Hi Jennifer! I’d suggest 340-345°F for 10-15 seconds with very firm pressure.
Tara Sang December 17, 2018 at 12:47 am - Reply
Hello,
Can i use siser on 100% PU (I suppose that means polyurethane)? If so, temp? Time? Peel?
Also, can i use it on a baseball bag that says “Heavy Duty Nylon Rip Stop & 600 100% D Polyester”?
Not quite sure whaty that all means but i’m going the “heavy duty” is a good thing
And it can handle the heat.
And if so, temp, time and peel?.
Thank you!Lily December 18, 2018 at 11:54 am - Reply
Hi Tara! Siser® HTV can be applied to PU, but it’s possible the material is heat sensitive. I’d suggest test pressing at the standard recommended time and temp for the HTV you want to use. If there’s any negative affects, you’ll need to use the lower heat application method of 270-280°F for 15-20 seconds. Your peel will depend on the HTV you choose to use.
For your nylon duffel bag, you’ll need to use EasyWeed® Extra since it’s the only Siser HTV that can be applied to nylon. Additionally, I’d suggest test pressing and possibly using the lower temp application method mentioned above.
Alma December 17, 2018 at 7:32 am - Reply
Hi Lily, Can i apply glitter to a 100% poly brushed tricot?
Lily December 18, 2018 at 11:56 am - Reply
Yes, you can apply Glitter HTV to a polyester brushed tricot. However, I’d suggest checking the garment tag to see if there’s any indication the polyester could be heat sensitive. If it says “cool iron only” or “do not iron”, you’ll need to use the lower heat application method of 270-280°F for 15-20 seconds to avoid scorching.
Audra A Howley December 19, 2018 at 2:33 pm - Reply
Hi Lily! Can I apply HTV (regular or glitter) to velour? I have an easy press!
Lily December 20, 2018 at 9:25 am - Reply
Hi Audra! Velour is typically made from cotton or polyester so it could be decorated with HTV. I’d suggest double checking the tag on the item to see if there’s any indication it could be heat sensitive, and possible test pressing the fabric at our recommended time & temp for the EasyPress 345°F for 10-15 seconds. If you think it’s heat sensitive, I’d suggest pressing at 305°F for 15-20 seconds. After applying, you’ll likely need to re-fluff the velour fabric that’s been pressed down, and after that you’re all set!
Hickory December 21, 2018 at 9:31 pm - Reply
Love the product. I use it a lot. I want to try to decorate a scarf/wrap. It’s 100% acrylic and says do not iron. I’ll drop the iron temp on it, but is there anything else I can do?
Lily December 26, 2018 at 11:00 am - Reply
Hi Hickory! Going as low as 270°F is about as much as you can do for acrylic that says “do no iron.” You may want to use parchment paper instead of teflon since the paper lets go of the heat faster, but changing your cover sheet may only make a marginal difference. The temperature is the main factor with heat sensitive fabrics.
Alyson December 27, 2018 at 7:07 pm - Reply
Hi! I have plans to start using HTV for some costume projects. I was wondering if you knew if the HTV can be applied to a polyurthrene fabric? Like a 2 way stretch spandex with a PU coating?
Lily December 28, 2018 at 8:10 am - Reply
Hi Alyson! Yes, products in the EasyWeed® family can be applied to polyurethane. With a fabric like that, I’d definitely suggest applying at a lower temperature and longer pressing time, 280°F for 15-20 seconds.
Micah Tibbe January 2, 2019 at 7:44 am - Reply
I was wondering if the easyweed stretch would work on Under Armour heat gear shirts? If it can be used what setting on my heatpress should I use?
Lily January 4, 2019 at 10:37 am - Reply
Hi Micah! Yes, EasyWeed® Stretch can be applied to under armour. I’d suggest 305°F for 15-20 seconds with firm pressure.
Erin January 3, 2019 at 5:41 pm - Reply
What type of HTV would you recommend using on flag material?
Lily January 4, 2019 at 8:28 am - Reply
Hi Erin! Without the fabric content of the flag, it’s hard to say which material would be best to use. If the flag is nylon, you’ll have to use EasyWeed® Extra for it’s special adhesive. If the flag is more like a plastic or vinyl, then you may even want to use EasyPSV™ Permanent, which is made to endure outdoor weather. But if the flag is cotton, polyester, or any kind of blend with those fabrics, you can use your choice of HTV.
Jeannine Lajb January 6, 2019 at 5:44 pm - Reply
Please help!!! I have wrestling shorts that are 100% polyester. I have pressed on 270 and the vinyl is not sticking at all!!! I have decreased the heat and have increased with no success. Please tell me what I am doing wrong.
Lily January 7, 2019 at 9:23 am - Reply
Hi Jeannine! If your pressing time and temperature are accurate and the HTV won’t stick- pressure is usually the culprit. I’d suggest using a heat transfer pillow or mouse pad inside the leg of the shorts to counteract the seams as well.
erika birmingham January 8, 2019 at 10:44 am - Reply
Hi! Is there any way to apply HTV to a latex or silicone swim cap?
Lily January 15, 2019 at 8:48 am - Reply
Hi Erika! Consistent exposure to chlorine can shorten the longevity of HTV, causing it to become brittle and crack. To decorate swim caps with the best results, I’d suggest looking into screen-printing inks.
Mindi March 29, 2019 at 8:14 pm - Reply
I wanted to do the same thing. Have you tried it with a silicone cap? Did it work?
Lily April 1, 2019 at 8:39 am - Reply
Hi Mindi! Unfortunately, Heat Transfer Vinyl doesn’t like to stick to silicone for long. I’d recommend screen printing for the most durable print.
Mandy Nawroth January 9, 2019 at 5:24 pm - Reply
I have a blanket that someone wants me to add glitter htv to. It’s 100% polyester and the tag says you can use an iron but it also says hand wash only maximum temp 40 degrees Celsius. Am I even able to add htv to this?
Lily January 10, 2019 at 12:54 pm - Reply
Hi Mandy! This is one of those cases, where’s it’s hard to say without testing the fabric first. I’d suggest test pressing a small area at 270-280°F for 15-20 seconds to see how the fabric will react. It’s likely that you can add HTV to the blanket, but you’ll want to press the fabric first before committing to the decoration just to be safe.
Pam January 14, 2019 at 5:34 pm - Reply
I have a customer who has a jacket he would like HTV on. It’s 100% taslon nylon shell w/microfleece lining & lightweight polyfill insulation. Which type of HTV would be best for this and at for what time and temp?
Lily January 15, 2019 at 8:46 am - Reply
Hi Pam! If you’re decorating the nylon shell, then you’ll need to use EasyWeed® Extra in order for the HTV to stick. But you could use any HTV on the fleece lining. Since nylon and fleece can be heat sensitive, you may want to err on the side of caution for your customer and press between 270-280°F for 15-20 seconds to ensure the fabric isn’t affected.
Tiffany January 19, 2019 at 3:25 pm - Reply
Hi there! I’m needing to press superhero capes. They’re 100% polyester- SUPER thin material (think plastic table cloth type but NOT plastic). I’m putting easy weed on. Suggestions for temp and time? Thanks!
Lily January 24, 2019 at 2:39 pm - Reply
Hi Tiffany! With thin polyester like that, it’s likely the material is heat sensitive. I’d suggest using the lower application method, 280°F for 15-20 seconds.
Vickie January 23, 2019 at 10:14 am - Reply
Hi,
If I am making custom nylon lanyards, it appears I should use easy weed extra. How does it stick? Do I still use an iron? Thank you!Lily January 24, 2019 at 2:41 pm - Reply
Hi Vickie! Yes, if you’re decorating nylon you’ll need to use EasyWeed® Extra for the HTV to stick. Extra cuts, weeds, and applies the same as regular EasyWeed, however Extra has an especially strong adhesive that’s made to grip nylon and coated fabrics.
Natalie January 23, 2019 at 8:43 pm - Reply
Hi… would easyweed work on a barber cape that is durable polyester (plastic to me)? I am curious of temp and any tips as I would hate to ruin it. Thanks!
Lily January 24, 2019 at 2:48 pm - Reply
Hi Natalie! Yes, you can put heat transfer vinyl on salon capes. If the fabric is polyester, I’d go with regular EasyWeed®, but apply it using the lower temp application method (270-280°F for 15-20 seconds) just in case the fabric is heat sensitive. Often, barber capes are nylon though. In that case you’ll need to use EasyWeed Extra for the HTV to stick to the fabric.
John February 3, 2019 at 1:04 pm - Reply
Hi- can I apply HTV to a jacket that is 85% polyester/15% nylon? Thanks!
Lily February 4, 2019 at 8:43 am - Reply
Hi John! Yes, HTV can be applied to a polyester and nylon blend jacket. However, since the jacket contains nylon you’ll need to use EasyWeed® Extra. Otherwise the vinyl will not stick to the slick surface.
Denisse February 3, 2019 at 8:32 pm - Reply
Hi what kind of vinyl I have to use on a 100% polyester?
Lily February 4, 2019 at 8:44 am - Reply
Hi there! All Siser® HTV can be applied to 100% polyester.
Mindy Taylor February 7, 2019 at 8:59 am - Reply
I am having an issue with the HTV coming off in the wash on shirts that I pressed and I am hoping you have a suggestion. The shirts are 100% polyester with Easyweed stretch and electric that was applied with a heat press at 280 degrees. I tacked the first 2 colors at 5 secs each and the final press with third color at 15 sec. 2 of the shirts left scorch marks and after washing the other 3, the vinyl came off. I thought about a final extra press of 15 sec, but the scorching on the others had me concerned. Thanks for all the great help you provide!!!
Lily February 8, 2019 at 9:10 am - Reply
Hi Mindy! We often find when the application time and temperature are suitable and the HTV is lifting, there’s a problem with pressure. I’d recommend pressing the shirts with heat transfer pillow inside- watch this video to learn all about pillows. EasyWeed® Stretch needs firm pressure to prevent peeling. Additionally, it sounds like the fabric is extremely heat sensitive, so you could even go down to 270°F for the temperature.
Mindy Taylor February 8, 2019 at 7:40 pm - Reply
Thanks so much. Will give it a try with your suggestions! What psi readings correspond to light, medium and firm to make sure I have it right?
Lily February 11, 2019 at 10:33 am - Reply
1-3psi is Light, 4-6 is Medium, and 7-9 is Firm pressure. Good luck!
Alicia February 11, 2019 at 11:20 am - Reply
I have a shirt that is 90% polyester and 10% elastane. “low iron”. Would it be best to press on the 280* for a longer time? and since stretchy which htv would you suggest?
Lily February 12, 2019 at 9:19 am - Reply
Hi Alicia! Yes, if it says “low iron then I’d definitely go with 270-280°F for 15-20 seconds. EasyWeed® Stretch will perform the best on the elastane, but be sure to use firm pressure and maybe even a pressing pillow if needed.
Will Hemphill February 12, 2019 at 3:24 pm - Reply
alright, the vinyl on my leather jacket has been peeling for a long time, and i would like to repair it, but i dont have a heat press or teflon, i do have an Iron and a Pillow case. and i do know I used easyweed. though i think it was easyweed extra? whichever one works on leather.
Lily February 13, 2019 at 8:42 am - Reply
Hi Will! EasyWeed and EasyWeed Extra will apply to leather, however real leather can vary in the amount of natural oils that get released over time. Sometimes these oils will prevent HTV from sticking properly. To re-apply the HTV on your jacket, I’d suggest turning your iron to a setting or two below “Cotton” and pressing with the pillow case on top for 5 second increments until the HTV is adhered again.
Whk February 25, 2019 at 6:39 pm - Reply
What temp for 100% polyester? And wind breaker material?
I pressed on an umbrella at 340 and it came out well
Lily February 26, 2019 at 3:48 pm - Reply
Hi there! Sometimes polyester is heat sensitive and sometimes it isn’t. I’d recommend test pressing a small inconspicuous area with the recommended settings for the HTV you’re using (time, temp, and pressure can be found on each product page of our website) to see if there are negative effects from the higher heat. If so, you can lower the temp to 270-280°F and press for 15-20 seconds for all Siser heat transfer vinyls.
Windbreakers can be polyester but are also sometimes nylon. If the fabric content has any nylon you will need to use EasyWeed® Extra in order for the HTV to stick. You may also need to remove a waterproof coating from the application area if the HTV still isn’t sticking. Check out this video for more details.
Sara Valdez February 26, 2019 at 9:51 am - Reply
Htv siser works on silk satin?
Lily February 27, 2019 at 9:40 am - Reply
Hi Sara! Yes, but satin can be heat sensitive so you’ll want to use the lower temperature application method to avoid harming the fabric.
Joy February 26, 2019 at 1:48 pm - Reply
Hello!
Can you put easyweed on a Polyvinyl Chloride bag using a heatpress?
Lily February 27, 2019 at 9:09 am - Reply
Hi Joy! Yes, but I would definitely recommend using the lower temp application method to avoid melting the bag.
Donna March 1, 2019 at 4:34 pm - Reply
I have a baby milestone blanket and it says it’s 100% Flannel. It’s that soft plush blanket feel. Would it be best to use Siser Extra or Stripflock? Also would I use the heat sensitive settings? I have a FrancierStudio heat press.
Lily March 4, 2019 at 10:26 am - Reply
Hi Donna! Flannel is often cotton or wool, so you won’t need to use EasyWeed® Extra which is designed for nylon fabrics. Additionally, the standard heat settings shouldn’t be a problem for that fabric, so I’d go with StripFlock®.
Whk March 2, 2019 at 7:15 am - Reply
Would the siser heat pillow prevent scorching on material?
For example i want to press on a tube top, i have experimented with 270-280° but that may be a lil too hot for certain materials.
I’m using promo heat pressDesiree March 4, 2019 at 4:57 pm - Reply
Hi do you know if Siser HTV can be applied to shirts that are poplin? Like Columbia type fishing shirts. They most often have that mesh lining underneath. I’m using a heat press and I’m not sure about this fabric type.
Lily March 6, 2019 at 11:51 am - Reply
Hi Desiree! Poplin is a cotton fabric, so you can use any Siser® HTV with their recommended application settings.
Cindy Pfeiffer March 4, 2019 at 8:23 pm - Reply
Hi Lily! I am looking for advice on applying vinyl to a patterned faux leather notebook. I have a cricut heat press as well.
Thank you!
Cindy:-)
Lily March 6, 2019 at 8:59 am - Reply
Hi Cindy! I would try setting your Cricut EasyPress to 300°F and press in 5 second increments until the carrier releases all the HTV. Be sure to use a cover sheet of some kind to protect the faux leather.
Renita March 9, 2019 at 9:04 pm - Reply
I am customizing a bathing suit that is 80% nylon and 20% spandex. I know I can use print and cut extra but can I use glitter for the number and name?
Lily March 11, 2019 at 9:39 am - Reply
Hi Renita! For a nylon blend you’ll need to use ColorPrint™ Extra or EasyWeed® Extra as your bottom layer for the Glitter HTV to stick. Please keep in mind that Glitter HTV won’t stretch with the spandex and may pucker or crack if the design is large.
bjorn Simoen March 14, 2019 at 11:21 am - Reply
Hello,
Just found this. I have a Mutoh ValueJet 426UF (small UV printer) is it possible to print with the UV printer on the material and afterwards transfer it to textiles like t-shirts, or is this only for solvent printers?
Kind regards
Lily March 15, 2019 at 9:46 am - Reply
Hi! Siser® ColorPrint™ materials are only compatible with eco-solvent, solvent, and latex inks. So unfortunately, UV printers will not work with our products.
Kaitlin March 15, 2019 at 12:53 pm - Reply
Hi I have a question. I got a bunch of vinyl from someone that wasnt sure if it was HTV or not. Is there a way to tell if it is HTV or not? I really want to start making some more shirts for my business but I dont want to use the wrong vinyl. What happens if i try and its not HTV? I’m just trying to figure this all out. Thanks
Lily March 19, 2019 at 2:00 pm - Reply
Hi Kaitlin! Heat Transfer Vinyl comes on a clear plastic carrier and Siser® adhesive vinyl, EasyPSV™, comes on a paper backing. Another way to tell the difference is to peel up a small corner and feel the back of the vinyl. If the vinyl is already sticky, then it’s adhesive vinyl. If the adhesive side of the vinyl isn’t sticky it’s heat transfer vinyl (the adhesive is activated by the heat when applied.) If EasyPSV™ was heat applied, it could possibly melt and wouldn’t stick to the garment because the adhesive isn’t formulated for fabrics. Hope that helps!
Carrie March 17, 2019 at 10:48 am - Reply
We recently printed on 100% polyester (have multiple times) on shirts from BSN Sports, using Siser Easyweed Stretch at the suggested temp and pressure using a professional heat press. Just got notified all the letters came off clean in the wash. This has never happened to us before although, we’ve never printed on that companies products before. Is it possible that company is adding a chemical to their garments causing this to happen? I only ask this because we’ve never had this happen to any other 100% poly garment before. Please advise. Thank you
Lily March 19, 2019 at 2:25 pm - Reply
Hi Carrie! I’m so sorry for your experience with EasyWeed® Stretch! To assist you best, please send your heat application process (equipment, time, temp, and pressure used) as well as any photos of the lifting HTV to Support@SiserNA.com so we can help troubleshoot this situation. Thanks!
Teresa April 26, 2019 at 2:58 pm - Reply
Carrie,
What settings do you use to transfer to 100% polyester? I am going to attempt it for the first time and I’m worried about it not working! Any suggestions, as you say it has worked for you in the past?
Anna March 19, 2019 at 3:05 pm - Reply
Hello! I just cam across this post as I am doing a little bit of research! I was going to purchase a polyester taffeta sort of windbreaker jacket and wanted to put HTV on it but I don’t want to melt the jacket! Any suggestions?
Lily March 25, 2019 at 10:48 am - Reply
Hi Anna! I’d recommend using the lower temperature application method for polyester taffeta: 270-280°F for 15-20 seconds. You may also want to watch this video and check if your jacket has a waterproof coating which will affect the application process.
RACHEL March 21, 2019 at 1:10 pm - Reply
Hi! I have EZweed Extra. Is this suitable for a hat 80/20 acrylic/wool OR 50/30/20 wool/acrylic/nylon?
Lily March 25, 2019 at 10:40 am - Reply
Hi Rachel! You can use EasyWeed® Extra on those blends, but EasyWeed® is going to be a more cost effective choice for the project. If you only have Extra on hand then go for it, otherwise I’d suggest purchasing standard EasyWeed®.
Traci March 28, 2019 at 5:36 pm - Reply
Hi! I would like to use htv on dog collars made of nylon webbing. I’ve tried the easyweed extra (heatpress set to 305 F for 15 seconds), but the vinyl comes off in the wash. Just wondering if I’m doing it wrong, or am I expecting too much?
Lily March 29, 2019 at 12:40 pm - Reply
Hi Traci! Some nylons have coatings that prevent the HTV from adhering properly. However, we’ve had success on nylon dog collars in the past. I’d suggest testing out another brand of collar to see if you have better results.
Eve Theriault March 30, 2019 at 11:42 am - Reply
Hi! I would like to personalize my daughter’s gymnastics apparel (like Ozone leotards). I have used EasyWeed Stretch on one before and it held up pretty well. I would like to have a metallic finish on her leotard, but I am not sure if the Metallic HTV would bond well with a fabric with a high lycra content. I would also be able to layer the shiny HTV is that possible? Thank you!
adrian April 10, 2019 at 7:51 am - Reply
hello lily,
have a question how can I apply t-shirt fabric or any fabric to satin baseball jackets .will it adhere like htv easyweed extra doesLily April 11, 2019 at 8:49 am - Reply
Hi Adrian! If the satin jacket is made of nylon then you’ll definitely need to use EasyWeed® Extra. If you only have 1 garment, I’d suggest pressing at 280°F for 15-20 seconds with medium pressure. Sometimes satin and nylon can handle the standard 305°F temperature though, so if you do have an extra to spare I’d suggest test pressing in an inconspicuous area for 10-15 seconds to see how it will react first.
Maresha April 11, 2019 at 6:48 pm - Reply
Hi. I want to put HTV on 65% Polyester & 35% Viscose. Is this possible and what heat setting should my heat press be?
Lily April 16, 2019 at 8:30 am - Reply
Hi Maresha! Viscose is similar to rayon and can be decorated with heat transfer vinyl. I’d recommend using the heat application settings from this post on decorating rayon.
Becky April 12, 2019 at 1:11 pm - Reply
Hello Lily
Can you put glitter htv to a jacket with 84% polyester and 16% elastic?Lily April 16, 2019 at 8:41 am - Reply
Hi Becky! Yes, you can however please note that Siser Glitter® HTV may not stretch with the elastic and if the jacket has a waterproof coating, you may need to remove it. Check out this video for how to identify waterproof coatings, remove it, and recommended heat application settings.
Ed Riley April 12, 2019 at 9:45 pm - Reply
Hi Anna… baseball coach from Ohio, doing warm up They are 100% matte micro polyester. I have HTV logos, names and numbers. From what I am seeing, 170-180 for a couple seconds to get the backing off, followed by 15-20 seconds following. with the heat transfer paper on top both times… is this the correct procedure.
~ Coach Ed ~
Lily June 5, 2020 at 8:54 am - Reply
Hi Ed! That’s pretty much it, however be sure to use 270-280°F. 170-180°F will be too low for the HTV to stick without a very long pressing time. Take care! :)
Kelly E April 16, 2019 at 9:30 am - Reply
Hi. I used Siser Easyweek Stretch HTV on Cotton stretch headbands for my daughter’s soccer team. I pressed with an Easy Press 305 degrees for 15 seconds, but it was not long enough for the team name so I upped it another 15. It still seems like it is not fully adhered, and doesn’t lie flat when stretched. What did I do wrong? I am going to try pressing again, but I was afraid of pressing too much. Any insight? Thanks!
Lily April 17, 2019 at 8:11 am - Reply
Hi Kelly! Some headbands have a seam or stitching that runs through the center. If that’s the case, you’ll need to put a heat transfer pillow inside to even out your pressure. Otherwise, I’d recommend increasing your temperature to 335°F and press each section of vinyl firmly for 10-15 seconds until it all releases from the clear carrier.
Tina Powell April 16, 2019 at 9:34 pm - Reply
Hi! I am wondering if you could perhaps have advice on using htv on an easter basket that is lined with plastic, but I don’t know which kind. The fabric on the outside appears to be cotton, but I don’t want to melt the inner liner, which I can’t see. I thought about using either an iron or my flat iron, but I don’t know what temperature. Any suggestions?
Lily April 17, 2019 at 8:19 am - Reply
Hi Tina, if you can isolate the heat from your flat iron to just the fabric area and avoid the plastic, I think that would be the best route. Sometimes flat irons/hair straighteners have temperature settings like in this post on decorating headbands. In that case, a setting around 300-320°F will be best. If your flat iron just has number settings, then I’d suggest starting low and increasing the temp until all the HTV releases from the carrier. If the clear carrier begins to shrivel or wrinkle, then you know your heat is too high. Good luck with your project!
Teresa April 26, 2019 at 2:53 pm - Reply
Hello! I am wanting to use siser easyweed stretch HTV on a 100% polyester shirt. Do you have any recommendations? I’m worried about melting the fabric!
Lily April 30, 2019 at 10:50 am - Reply
Hi Teresa! Sometimes, 100% polyester can discolor and sometimes there are no adverse effects from the heat. I’d suggest pressing a small area for 15 seconds at 305°F to test the fabric and be sure. If there’s any discoloring, lower your temperature to 270°F and press the HTV for 15-20 seconds.
Michaelle May 3, 2019 at 9:45 am - Reply
Hi I am wanting to put a logo on a pop up changing tent. the tent is 210T polyester coated PU – tear proof polyester coated material.. is all I am seeing on the tent description.. I was wanting to use the glitter rainbow coral and easyweed elecric teal to create the logo. Is heat pressing this possible? and what temperature??
Lily May 6, 2019 at 9:44 am - Reply
Michaelle it’s possible the polyester has a coating that will prevent the HTV from properly sticking. You may need to use EasyWeed® Extra as a base layer or use the method from this video to apply just the Glitter and EasyWeed Electric. Since you probably don’t have an extra pop up laying around, I’d suggest starting at a low temp (270-280) and pressing for 5 second increments until the HTV releases from the plastic carrier.
Jenna May 14, 2019 at 10:23 am - Reply
Hi! I am wanting to put designs on clear plastic fanny packs but I’m not sure of the settings I should use? Thanks so much!
Heidi May 24, 2019 at 12:58 pm - Reply
I saw your response to applying HTV to polyester velvet. My questions are: 1) do I need to use a pressing pillow for my project and 2) how do I know the correct pressure to set on my press?
Lily May 24, 2019 at 1:25 pm - Reply
Hi Heidi! 1) Using a pillow will depend on what you’re decorating. If it has anything like seams, buttons, zippers, etc that can’t be moved off the lower platen for heat application then you need to use a heat transfer pillow. 2) Some presses have pressure read outs, but for those without we generally recommend turning the pressure knob all the way to the left to feel for no pressure, a couple twists to the right is light-medium, and almost all the way to the right is medium-firm. The type of HTV you’re using will determine what you need to set your pressure to.
Becky May 31, 2019 at 10:09 am - Reply
Hi! Can I press poly oxford fabric? It’s a garment bag people want personalized. Thanks!
Lily June 6, 2019 at 11:03 am - Reply
Hi Becky! Yes, you can apply HTV to a poly/oxford garment bag. However, you’ll want to check the tag for signs of heat sensitivity. If it says “cool iron” or “do not iron” you’ll need to use the lower temperature application method. Additionally, you may also want to check for a waterproof coating that could prevent the HTV from sticking. Check out this video for how to identify waterproof fabrics.
Eliz June 7, 2019 at 3:24 pm - Reply
Can you use Sister glitter htv on a rpet shirt? If so, what temperature and for how long?
Thank you!!!Eliz June 7, 2019 at 3:27 pm - Reply
I just checked the label it’s 50% organic cotton 50% rpet recycled polyester.
Lily June 10, 2019 at 8:30 am - Reply
Hi Eliz! I’ve never tried HTV on an RPET shirt before, but a polyester/cotton blend should be no problem for the Glitter HTV. If you don’t have an extra shirt to test press at the standard settings (Temp: 320°F Time: 10-15 seconds), I would use the lower temperature method instead: 270-280°F for 15-20 seconds. This method will avoid possible heat marks or dye migration that may occur from the standard application settings.
Nikki December 4, 2020 at 11:18 pm - Reply
Hi! I was wondering if anyone has tested on vinyl material. its a vinyl/cotton spare tire cover for a jeep. If so what is the best recommendations?
Lily December 7, 2020 at 11:38 am - Reply
Hi Nikki! You’ll either want to use HTV with the lower temperature application method or EasyPSV® Permanent.
Keili June 10, 2019 at 7:51 pm - Reply
Hi Lily!!
I have 100% cotton newborn onesies that are really soft and stretchy! It says do not iron. What type of vinyl would you recommend. I imagine it will need more stretch than the regular, but I don’t know! Thanks a million!Lily June 11, 2019 at 8:40 am - Reply
Hi! EasyWeed® Stretch would be best for a stretchy onesie. Be sure to use a heat transfer pillow and very firm pressure to apply Stretch HTV. I’d suggest lowering your temperature (270-280°F) and increasing your pressing time (15-20 seconds) since the tag says “do not iron” it may permanently discolor with a higher temperature.
larry wriser June 11, 2019 at 11:04 pm - Reply
i am wanting to use an HTV glitter on a microfiber gym towel… any recommendations for this?
Lily June 12, 2019 at 2:44 pm - Reply
Hi Larry! You can decorate microfiber with Glitter HTV using the standard application settings. The only thing I’d like to note is that HTV adheres to the towel fibers and may appear raised if pressed on to a high pile towel.
Courtney June 13, 2019 at 1:36 pm - Reply
I followed these directions exactly & still got heat press marks on my 100% polyester shirt.
Lily June 14, 2019 at 8:57 am - Reply
Hi Courtney, I’m sorry these steps didn’t work for you! Unfortunately, some polyester and rayon are extremely heat sensitive and will discolor even with the lowest heat setting. If the garment tag says “do not iron” or “cool iron only”, it’s often not the best blank to heat apply.
Natalie June 18, 2019 at 3:23 pm - Reply
Hello, I want to put a HTV decal on a wood piece. Should we lacquer it before or after?
Lily June 19, 2019 at 9:11 am - Reply
Hi Natalie! We’ve successfully applied HTV to unfinished wood and painted wood. However, due to the varieties of paints, stains, and lacquers, it would be best to perform your own test before committing to the full project. If the lacquer is applied first, there’s a possibility the heat needed for the HTV will activate gasses or harm the physical appearance. If the lacquer is applied after, there’s a possibility it will not stick to the HTV or will chip off easily. However, it’s also possible the process goes off without a hitch. You may also want to test our adhesive vinyl, EasyPSV® for this project. Good luck!
Renee June 18, 2019 at 5:19 pm - Reply
I was looking to use HTV Vinyl on Fanny Packs made from Poly 600D material. Is this possible?
Lily June 19, 2019 at 9:22 am - Reply
Hi Renee! You can use any Siser® HTV on polyester. I’d suggest reading the fanny packs’s tag for “do not iron” or “cool iron only” to know if you need to use the lower heat application method or if you can stick with the standard settings.
Kristen June 25, 2019 at 6:12 pm - Reply
Hi, I am monogramming some chiffon beach cover ups. I have searched for which Siser htv would be best and what temp/time setting- Do you have any recommendations?
ThanksLily June 26, 2019 at 8:18 am - Reply
Hi Kristen! First thing I’d recommend to do is check the garment tag for the fabric content and any heat sensitive indicators. If it’s a polyester or poly blend then you can really pick any Siser® HTV you prefer, but if it contains nylon you will have to use EasyWeed® Extra in order for the HTV to stick. If the tag says “do not iron” or “cool iron only” it’s likely the fabric will discolor from high heat and needs to be decorated with the lower temp application method demonstrated in this post. With a few adjustments, you can definitely get those cover ups monogrammed! Good luck :)
MIRIAM June 26, 2019 at 7:49 pm - Reply
I want to use HTV on my foam visors. If possible, what HTV would I use and the heat setting please. I’m wondering about EasyWeed Easy, but not sure. TIA
Lily June 27, 2019 at 9:44 am - Reply
Hello Miriam! I would actually recommend EasyPSV® for decorating foam visors. EasyPSV is applied similarly to a sticker and does not need as much pressure to make it stick as HTV does. The pressure from a home iron or heat press would likely squish the foam and ruin the look of the visor.
Chris June 27, 2019 at 8:06 pm - Reply
I am to decorate a canopy, both the drop down sides with text and also on the top part.with a 26 x 26 inch logo.
This is the stated fabric content.150D Silver coated polyester fabric top It’s royal blue. It’s polyester on the top side and silver on the back side. It also states: It’s water-resistant, fire-retardant, and offers UV protection.
Lily June 28, 2019 at 12:35 pm - Reply
Hi Chris! Since the polyester is definitely coated, you’ll need to remove the coating from the area you want to decorate with HTV in order for it to stick. This video explains how to remove waterproof coatings. Before applying the full design, I’d recommend removing the coating from a small corner and test applying the heat transfer vinyl to see if you’ll need to use the lower temperature application method on the polyester or if the standard time, temperature, and pressure will not harm the fabric. Please note that Siser HTV is not designed for consistent outdoor use, therefore, sun and other weather exposure can shorten the longevity and quality of the heat transfer vinyl.
Brittany June 30, 2019 at 12:41 pm - Reply
What would you recommend on a 92% polyester 8% spandex tank tops? Also what should I use to put between the HTV and heat press? Thank you!
Lily July 1, 2019 at 8:39 am - Reply
Hi Brittany! For a polyester/spandex blend, I’d recommend using EasyWeed® Stretch. You will likely need to place a heat transfer pillow inside the tank top like I did in this blog post to achieve proper pressure. As for between the HTV and heat press, we suggest using a heat transfer cover sheet, but parchment paper or a cotton pressing cloth can also work.
nama July 19, 2019 at 4:31 pm - Reply
Hello Lily ,
Hope you are doing well..
Just wondering what type of HTV can i use for sensitive heat?
Like the robes of the bridesmaid made up of satin i guess.What would be your best suggestion to choose the right HTV ?
I have attachment to show you as an example .By the way thank you for your information reading from ppls comments.
Appreciate your time .
Have a Good Day !
NamLily July 22, 2019 at 8:46 am - Reply
Hi Nam! Thanks for reading the Siser Blog! All Siser® HTV’s application time and temperatures can be adjusted to accommodate heat sensitive fabrics, so it’s really up to your preference! For satin robes however, I would suggest EasyWeed® or Glitter, but that’s just my opinion ;) I’m sorry that I can’t see your attachment. If you need further assistance, please feel free to email me at lily.campau@siserna.com
nama July 22, 2019 at 9:32 am - Reply
Oh! that’s so nice of you Lily!
Thanks for replying back to me and the information.
Sure will send you and email.
Have a Great Day :)
Lissa July 21, 2019 at 6:28 pm - Reply
Hi,
I have some shirts that are 90% Polyester and 10% Polyurethane or 85/15, moisture wicking, quick-dri, with air circulation. I am being asked to put something on them in vinyl. Which product do you recommend and what temperature should I use on the heat press and for how long please?Lily July 22, 2019 at 8:41 am - Reply
Hi there! It sounds like the garments could possibly have coatings that can prevent HTV from adhering properly. You may be able to use EasyWeed® Extra since it has a stronger adhesive for nylon and coated fabrics. However, I’d suggest first checking for coatings with a quick test showed in this video. That video also explains how to use the lower temperature application method, which I would suggest for this type of garment.
chani March 15, 2020 at 5:58 pm - Reply
can i put siser metal htv on silk
Lily March 16, 2020 at 9:41 am - Reply
Yes, you can! If it’s real silk, you may want to use a lower temperature, but Metal will stick!
Ginger March 28, 2020 at 5:53 pm - Reply
Can htv be put on lace?
Lily March 31, 2020 at 2:58 pm - Reply
Hi Ginger! Typically yes, but you’ll want to check the fabric content of the lace if possible. If you’re unsure what it’s made of, I’d suggest using the lower temperature application method just to be on the safe side.
Heather March 30, 2020 at 10:20 am - Reply
I use the Cricut brand of vinyl and wonder which is the best to use on 420 denier polyester? This is what I will be transferring on to: https://www.firelabel.co.uk/caps-and-bags/bags/accessories/qd86-quadra-boot-bag.html. I recently bought Cricut Sportflex not realising that it’s more for stretchy materials. Your advice would be much appreciated. Thank you :)
Lily April 1, 2020 at 1:40 pm - Reply
Hi Heather! While I’m unable to recommend a Cricut brand vinyl, I’d like to let you know that you could use any Siser® brand heat transfer vinyl on 420 denier polyester. It’s up to your preference, but all will stick.
Amber Atkinson April 16, 2020 at 1:06 pm - Reply
Have you used HTV on muslin blankets? If so what setting!?
Lily April 21, 2020 at 9:53 am - Reply
The standard settings for the type of HTV you’re using will be fine for muslin since muslin is cotton.
Nicole Prindable April 21, 2020 at 6:51 pm - Reply
I am working with robes that are satin. What would be the best way to go about applying HTV?
Lily April 22, 2020 at 9:55 am - Reply
Hi Nicole! You can use any Siser HTV on satin robes, they will all stick! If you’re not sure of the fabric content, I’d suggest using the lower temperature application method (270-280°F for 15-20 seconds) although some satin is ok with the standard temperature.
Stephanie Jones April 22, 2020 at 11:19 pm - Reply
Hi!! I’m wanting to apply Siser easyweed HTV to a shirt that is 95% modal & 5% elastane. What heat press settings should I use?
Lily April 23, 2020 at 9:38 am - Reply
Hi Stephanie! I go over all my tips for applying HTV on modal in this blog post Hope that helps!
https://about.me/paper-io-2 April 23, 2020 at 8:09 am - Reply
Everything is very open with a precise explanation of the challenges.
It was definitely informative. Your site is very useful.
Thank you for sharing!Chamya May 11, 2020 at 7:25 pm - Reply
Can you put htv on 65% polyester
Lily May 12, 2020 at 10:06 am - Reply
Absolutely! All Siser® HTV can be applied to cotton, polyester, and cotton/poly blends.
Kristine May 28, 2020 at 6:48 pm - Reply
I have some Bella Canvas shirts that are poly / viscose blend. What HTV do you recommend and what heat settings? Thank you!
Lily May 29, 2020 at 9:31 am - Reply
Hi Kristine! You can use whichever HTV you prefer, but will likely need to lower your temperature and apply for a longer time like we suggest with the lower temp application method (270-280°F for 15-20 seconds) to have success on a poly/viscose blend.
Lisa June 4, 2020 at 6:45 pm - Reply
What do you recommend for rip stop nylon (flag)?
Lily June 5, 2020 at 8:29 am - Reply
Hi Lisa! You will definitely need EasyWeed® Extra for any nylon.
Tunja June 5, 2020 at 2:08 am - Reply
What are your thoughts on heat pressing HTV on a 100% polyester outdoor flag? Regular HTV or Stretch or don’t do it? Oh & why didn’t anyone answer poor Coach Ed’s question from 4/12/19? :)
Lily June 5, 2020 at 8:56 am - Reply
Hi Tunja! I would probably opt for regular EasyWeed® but either would work on the flag. However, HTV isn’t made to endure consistent outdoor exposure and weather elements so it’s likely to fade or crack sooner than it would on a t-shirt.
Whoops, I thought Ed was offering advice. I missed his question at the end, but I just answered him. Thanks for pointing it out :)
Bri June 22, 2020 at 6:32 pm - Reply
I have a top that is 92% nylon 8% spandex. What HTV would I be able to place on this type of material? Easyweed stretch? Easyweed extra? Is there a temperature setting and time recommended? It says no iron. 😩
Lily June 23, 2020 at 9:19 am - Reply
Hi Bri! With nylon content, you’ll need to use EasyWeed® Extra. I’d suggest pressing with the lower temperature application method (270-280°F for 15-20 seconds.)
Desiree Cicco June 25, 2020 at 5:54 pm - Reply
My daughter is a dancer; she is getting a pair of booties to wear over her pointe shoes. The material is made of nylon and polyester. After reading some of the comments/responses, I’m thinking EasyWeed Extra. Would you recommend something else? And I’m hoping I can find a blue glitter HTV :)
Lily June 26, 2020 at 11:14 am - Reply
Hi Desiree! Yes, you’ll definitely want to use EasyWeed® Extra for the nylon/poly material. You may be able to layer the Glitter HTV on top of Extra, but it’s likely to not last as long in the wash since we don’t recommend layering Glitter.
Christal June 26, 2020 at 12:09 am - Reply
Hi there, thank you so much for all the great tips! I recently applied Easyweed HTV to a 60% Pima Cotton, 40% Recycled Polyester V-neck T-shirt. The woman wearing the shirt fit it well, but she is a bit top heavy so the letters across her chest are stretched. Should I have used a different type of vinyl?
Lily June 26, 2020 at 11:20 am - Reply
Hi Christal, thanks for reading the Siser Blog! We recommend using EasyWeed® Stretch when applying designs directly across a large chest. Even then, it’s possible to experience pulling so we suggest going up a shirt size or creating the design with more broken up elements so the shirt fabric can stretch more than the HTV has to.
Kelli Romero July 2, 2020 at 2:18 pm - Reply
Hi Lily, Can you please tell me if Siser’s Easyweed HTV is flame resistant?
Lily July 6, 2020 at 8:29 am - Reply
Hi Kelli! Unfortunately, Siser® HTV is not flame resistant.
Sarah July 2, 2020 at 6:26 pm - Reply
Hi! I may have found this blog a little too late…. I have a heather grey shirt, 60% cotton, 40% polyester, that I applied a glitter vinyl to. Temperature was 305, press time 12 seconds. I ended up with a dark square around the design where my parchment paper protector sheet was. Is this a result of the heat, and is the shirt done for? :(
Lily July 6, 2020 at 8:31 am - Reply
Hi Sarah! Yes, the heat has left a scorch mark AKA heat press box on your heat sensitive shirt and cannot be removed. The best suggestion I have at this point is to press the rest of the shirt all over until the the color of the scorch mark is the new color of the garment.
Melissa July 13, 2020 at 7:55 am - Reply
What vinyl is best for a flannel button down shirt? It seems like I can easy peel the htv off that I have been using?!?!
Lily July 13, 2020 at 2:30 pm - Reply
Hi Melissa! Most flannels are made up of predominantly cotton so really any Siser® HTV can be applied. If the HTV is peeling, there’s likely an application issue. Most commonly, uneven or not enough pressure can result in peeling HTV. I’d suggest increasing your pressure and using a heat transfer pillow to even out the pressure.
Kelly July 14, 2020 at 7:45 pm - Reply
Hey there, I’m looking to apply htv to an apron that says the iron temp is 100°C (230°F). What is your suggestion here?
Lily July 15, 2020 at 9:35 am - Reply
Hi Kelly! In order to avoid negative affects on the fabric, I’d suggest applying at the temperature the tag suggests. However, this is 40°F less than the lowest temperature we recommend. That doesn’t mean you can’t apply the HTV, it just means you’ll have to increase your pressing time to 30-35 seconds. If the lower temperature and longer pressing time isn’t successful, you may need to consider a different blank apron to use.
Keitha Woodard July 27, 2020 at 5:17 pm - Reply
Hi, I wanted to know what vinyl is the best for silk sleep masks. The htv I’ve experienced with recently has been peeling off almost immediately. I would like to order Siser htv for the first time and need some advice. Thanks
Lily July 28, 2020 at 8:12 am - Reply
Hi Keitha! All Siser® HTV will work on 100% silk, but I would recommend starting with EasyWeed®. Peeling most often occurs from a pressure issue, so you may need to put a heat transfer pillow between the mask and the strap to get an even press.
Keitha July 28, 2020 at 1:25 pm - Reply
I’m purchasing today! Thank you so much for your help!
Lily July 29, 2020 at 8:42 am - Reply
You’re welcome, Keitha! Happy I could help :)
Monica August 5, 2020 at 12:16 am - Reply
I was hoping to find out what kind of vinyl I would need to use when applying a layered decal on a travel cooler with a rubbery/waterproof exterior. It’s material based but with a repellent rubbery material coating.
Lily August 5, 2020 at 8:19 am - Reply
Hi Monica! I’d suggest testing EasyPSV® Permanent on the cooler. If the material feels like silicone, adhesive vinyl may not stick.
Soclikes August 6, 2020 at 8:27 am - Reply
These are extremely good tips as for me. I have already burned some clothes. Now I will be more accurate, thank you
Brock August 9, 2020 at 12:26 am - Reply
Hey Lily,
I have a uv arm sleeve I would like to print on to. The material is 80% polyester and 20% spandex. Will Easyweed work with lower temp settings(280), shorter press time and multiple presses?
Lily August 12, 2020 at 12:24 pm - Reply
Hi Brock! Unfortunately, most fabrics with a UV coating do not hold HTV long. You can try EasyWeed® Extra, but it will not move with spandex as well as EasyWeed® Stretch will. However, Stretch is likely to peel before Extra will. I’d suggest test applying a small bit of both on part of the sleeve to see if a full design is possible.
Lauren Reese August 10, 2020 at 6:04 pm - Reply
Hello, I am shipping a large box of sweatshirts in a car that is being transported for 5 days. The sweatshirts with be in the hot car with no A/C for 5 days inside a cardboard box. They have HTV on them. Will the HTV be ruined or melt on the sweatshirts? Thank you!
Lily August 12, 2020 at 1:55 pm - Reply
Hi Lauren! I’d suggest using parchment paper in-between the individual garments to prevent them from sticking together in the extreme heat. These designs are applied using heat so they can definitely release with excessive heat especially if the bond between the HTV and fabric is lacking. You’ll have to try it out and see how well the heat application will hold up.
Macy August 12, 2020 at 2:21 pm - Reply
Hi. I am wondering if I can put Siser HTV vinyl on a polyester and nylon blend. It says it’s body is 92% polyester and the front and back panel is 78% nylon. Is it okay to put vinyl on this shirt?
Lily August 13, 2020 at 8:30 am - Reply
Hi Macy! You’ll need to use EasyWeed® Extra in order for the HTV to stick to a nylon blend.
Mieshia White August 16, 2020 at 11:46 pm - Reply
I am trying to apply htv to 100% polyester windbreaker pants..the htv Applies but when I wash the pants and sometimes before I wash the pants the htv comes off..what am I doing wrong? What htv is the best for 100% polyester windbreaker pants? Which temperature?
Lily August 17, 2020 at 9:32 am - Reply
Hi there! If the windbreaker pants have a water proof coating (easily identified by dripping water on the fabric. If the water soaks in then there’s no coating. If the water pools and doesn’t soak in then the fabric is coated) then you will need to use EasyWeed® Extra for the HTV to stick. Additionally, the most common case of peeling HTV is a pressure issue. You may need to use a heat transfer pillow to get proper pressure on the HTV during heat application.
Christian August 22, 2020 at 8:17 pm - Reply
Hello was wondering if I could use easy weed on a shirt that is 70% polyester 25% cotton 5% spandex
Lily August 24, 2020 at 10:20 am - Reply
Yes, you can!
Elizabeth August 25, 2020 at 3:39 pm - Reply
Hi Lily, I have a question regarding work shirts I want to add a logo but I’m scared of ruining the shirts. you Probably answered this question, but there are over 400 comments. They are 40% Polyester – 34% Acrylic – 22% Rayon – 4% Spandex. what is the best recommendation to add the logo? what would be the best way to do it with the Cricut easy press mini?
Lily August 26, 2020 at 8:14 am - Reply
Hi Elizabeth! Typically with garments that contain spandex, I’d recommend EasyWeed® Stretch. However, because you’re using the EasyPress Mini it will be harder to get the firm pressure applied that Stretch needs. Therefore, I’d probably go with EasyWeed® and the middle heat setting on the Mini EasyPress for 10-15 seconds.
Amy September 3, 2020 at 9:17 pm - Reply
I have used both easy weed and easy weed stretch on 90% cotton 10% spandex and both have peeled after putting the items in the dryer. I washed the garments prior to pressing and did not use fabric softner. How can I can correct this?
Lily September 4, 2020 at 8:48 am - Reply
Hi Amy! There are many factors that contribute to peeling, but the most common is improper pressure during heat application. You may need to increase your pressure or use a pressing pillow. For further assistance, please email Support@SiserNA.com with your application steps and any pictures of the peeling vinyl.
meschell white September 7, 2020 at 9:09 pm - Reply
I have a shirt that is 35% rayon, 60% polyester, and 5% spandex. can I put htv on it? if so what temp and how long? thanks.
Lily September 8, 2020 at 8:38 am - Reply
Hi! I’d suggest test pressing the shirt to see if it’s heat sensitive. If you’re unable to test press, I’d suggest following the tips in this blog post since Modal is similar to Rayon.
Natisha Murphy September 16, 2020 at 6:57 am - Reply
Hello! I have a question. I purchased a shirt from a shop on Etsy and it is discolored around the lettering that was put on it. I purchased it for my sister for her birthday. I reached out to the shop owner about the issue to see if I could return the item and get a new one or a refund but they never did anything about it. So I’m trying to fix this hoodie on my own in hopes I can still give it to her. Plus I spent over $60 on it. Do you have suggestions on how to fix this? Thank you so much!
Laura September 21, 2020 at 10:42 pm - Reply
Hi! I’d like to press glitter HTV onto a fanny pack, which is made out of an oxford material. It looks as though the material is sensitive to heat. What temp should I use, pressure, and time? Thank you
Lily September 22, 2020 at 9:06 am - Reply
Hi Laura! Glitter needs a medium pressure to apply. For the heat sensitive oxford fabric I’d suggest 270-280°F for 15-20 seconds total.
Angela September 28, 2020 at 11:57 pm - Reply
I am new to this and want to put a logo on a 100% cotton twill hat. Will this work? I currently have the easy weed htv. Thanks.
Lily September 29, 2020 at 8:38 am - Reply
Hi Angela! You most likely won’t need to use the lower temperature application method for a cotton twill hat- the standard application settings should be fine. EasyWeed will work, however if the HTV is placed on a seam of the hat’s crown then it’s possible for the outline to show through the HTV. This is why we typically suggest using a thicker HTV on hats (like StripFlock® Pro, Brick, Glitter, etc) to cover the seam, but you can still use EasyWeed if you like. Here’s a video on decorating hats that may be helpful for you.
Christian Milano October 2, 2020 at 3:35 pm - Reply
Hi, I have a question about siser easyweed stretch vinyl. I’m working with cosplay type fabric which is 94% polyester and 6% spandex stretch pleather like material. It’s a matte black look, if that makes any sense. It’s yaya Han fabrics where you can find it at Joann fabrics.com. For some reason, after reading all the comments, I’ve done everything from different temps, to pressures and it still keeps lifting at the edges, what is the best vinyl for this material and how do I apply it properly to avoid lifting? It’s not going be washed as this is more for small figurines. Desperately need your help, I have clients asking for this material on their orders and I’m freakin out! Lol all help is appreciated. Thanks!
Lily October 5, 2020 at 8:23 am - Reply
Hi Christian! I’m sorry you’re having so much trouble with EasyWeed Stretch. Stretch requires 320°F with firm pressure pressure for 20 seconds on a heat press. If you have any kind of stitching on the small figurine fabric, then you will need to use a heat transfer pillow to accommodate for the pressure problem that seams/stitching cause. If you’re using an EasyPress then we recommend 350°F with firm pressure for 20 seconds. If you have tried all these things and the HTV is still not sticking, then I’d recommend trying EasyWeed Matte instead. It’s a little thicker and may grip the fabric better while keeping the matte look. If you still want to go with the EasyWeed Stretch then it may be best to reach out to Support@SiserNA.com with pictures of your project so we can try to troubleshoot further.
Jessica October 5, 2020 at 4:10 pm - Reply
Should you use this method for velvet or velour materials?
Lily October 6, 2020 at 8:47 am - Reply
Hi Jessica! I used the standard heat application settings for velvet drawstring bags in this blog post, however I would suggest using the lower temperature application method if you don’t have an extra velvet/velour item to test. Some velvet and velour is not heat sensitive, while others can be, so it’s best to test when you can or err on the side of caution when you’re unable to test.
Angela Chaney October 15, 2020 at 11:30 am - Reply
Hi how do I wash a 100% fabric polyester shirt/dri fit with easyweed htv attached to it so it does not come off in the wash?
Lily October 16, 2020 at 8:29 am - Reply
Hi Angela! Washing instructions for EasyWeed® are as follows:
-Wait 24 hours before first wash
-Machine wash warm or cold / mild detergent
-Dry on normal dryer setting
-Do not dry cleanAdditionally, I would suggest avoiding liquid fabrics softeners. On the other hand, fabric softener sheets are fine to use.
Allison October 21, 2020 at 11:57 pm - Reply
Can you use HTV on lame material? Looking to add some details to my kids Halloween outfit
Lily October 22, 2020 at 11:25 am - Reply
Hi Allison! Lamé can be heat sensitive so I’d suggest testing the heat on an inconspicuous area of the costume if possible. If the fabric shrivels from the heat then it will not be possible to apply the HTV. You may be able to get away with adhesive vinyl as a temporary decoration.
Sonya October 29, 2020 at 4:45 pm - Reply
Based on other comments would the EasyWeed Extra be the best option for a duffel bag that is 600 denier polyester canvas?
Lily October 30, 2020 at 8:16 am - Reply
Yes, 600 denier polyester is typically waterproof or water-resistant coated so you’ll need to use EasyWeed® Extra for the HTV to stick.
Katie November 1, 2020 at 1:48 am - Reply
I want to make personalized velcro in patches to put on a tactical dog collar. What type of webbing and HTV would work best together for durability?
Lily November 2, 2020 at 8:29 am - Reply
Hi Katie! Dog collars are often made of nylon, so you’ll likely need to use EasyWeed® Extra for the HTV to stick it’s best. I would suggest testing different collar types with the HTV to find the durability you’re looking for.
Adam November 9, 2020 at 10:32 pm - Reply
Looking to add HTV to 8 oz Duck, jacket (Carhartt/Dickies type) What type of HTV do you recommend? What other tips can you offer for best results?
Lily November 10, 2020 at 8:37 am - Reply
Hi Adam! Most duck fabrics have a waterproof coating so you’ll likely need to use EasyWeed® Extra. You can layer on top of Extra, but if you want to apply HTV without layering, you can remove the coating in the area you want to decorate. For best results, we always recommend a small test press on an inconspicuous spot (like the inside of a cuff or back of the jacket) to check if you need to use the lower temperature application method.
Lily November 16, 2020 at 9:59 am - Reply
Hi Mina! I’d suggest using EasyWeed® Extra on your nylon/spandex leggings. If you’re unable to test press then I’d suggest using the lower temperature application method, just in case!
Tamia November 28, 2020 at 8:46 pm - Reply
Hi Lily! Thank you for your tips. I read through all of the comments and believe I can just follow the steps in this post but wanted to double-check. I ordered adjustable masks on Amazon which the seller stated was 100% cotton….they arrived and are actually 80% Polyester and 20% non-woven. Am I able to apply the vinyl at the 270-280 degree, 15-25 secs settings I’ve read in this post and comments? I already use a heat transfer pressing pillow for my projects as well. Thank you!! :)
Lily November 30, 2020 at 9:07 am - Reply
Hi Tamia! Yes, the settings you stated would be best for your poly/non-woven face masks. I would still suggest testing 1 to see if you need to go even lower on the temperature since non-woven fabrics can be heat sensitive.
Juanita December 14, 2020 at 10:35 am - Reply
Hi Lily 🌸, Seems you are the Wizard of fabric applications, so I hope you can guide me on this project. We have in our family at least 4-5 outgrown or worn out cashmere sweaters. I’m planning on upcycling (parts) of them, but want to incorporate some tattoo looking art work. Think outlined black shapes (like the outline of a star, not a black star) of various sizes. It doesn’t have to stretch…. could you recommend what to try for these 100% cashmere sweaters — with or without the stretch component? Thank you!! 😉
Lily December 14, 2020 at 4:03 pm - Reply
Hi Juanita! I’d recommend StripFlock® Pro which is soft and fuzzy like your sweater, but it is not very stretchy. Good luck with your project :)
Nancy Peterson December 22, 2020 at 1:58 pm - Reply
I pressed a design using easyweed htv onto a nylon coat. When I peeled it, it left a sticky residue. Can I fix this? Thanks.
Lily December 23, 2020 at 8:46 am - Reply
Hi Nancy! You can re-apply the HTV on top of the sticky residue or try removing it with a vinyl remover like VLR or methylene chloride.
Lynda December 30, 2020 at 9:28 pm - Reply
Hi Lily!
Can I put glitter htv on spandex leggings? Is there a htv that I could put on leggings? And can I use my heat press?Lily January 4, 2021 at 9:50 am - Reply
Hi Lynda! For spandex leggings, I’d suggest EasyWeed Stretch. If you still want the Glitter look, I’d suggest breaking up your design into multiple pieces so the Glitter has more fabric in between to stretch. You could also use Sparkle™ HTV which is a little stretchier than Glitter. You can use your heat press, but you may need a heat transfer pillow to get proper pressure on the leggings.
Laura Saroli December 31, 2020 at 1:56 pm - Reply
Hello! What setting/time would you recommend for applying Siserweed HTV on a muslin receiving blanket? Thank you!
Lily January 4, 2021 at 9:54 am - Reply
Hi Laura! Muslin is usually made of mostly cotton so it will do just fine with the standard application settings for EasyWeed® HTV: 305°F, medium pressure, 10-15 seconds.
Angel Smith January 9, 2021 at 10:56 am - Reply
Hello, can Htv be applied to silk?
Lily January 11, 2021 at 8:06 am - Reply
Hi Angel! Yes, HTV can be applied to silk and satin. This video goes over the application process as well as tips and tricks for working with silk and satin.
Ellie January 13, 2021 at 2:31 pm - Reply
Can HTV be applied to a cotton knit blanket, as well as pressure and time? If not, what do you recommend (pressure & time as well)? Thanks!
Kelli January 14, 2021 at 9:19 am - Reply
Hi! I am pressing a very soft sweatshirt that is 90% polyester and 10% spandex. I plan to use easyweed stretch and 280 degrees for 20 seconds or so with parchment paper for protection. Does it sound like that should work?
Lily January 15, 2021 at 8:30 am - Reply
Hi Kelli! Sounds like you’re on the right track :) I’d suggest pressing a little longer though: 25-30 seconds. Standard application of EasyWeed® Stretch is 320°F for 20 seconds so the heat sensitive application would be 280°F for 25-30 seconds. Remember to always use firm pressure with EasyWeed® Stretch as well.
Amy January 16, 2021 at 2:32 pm - Reply
hi! Can HTV be used on sunbrella awnings? It’s a acrylic type material
Lily January 18, 2021 at 8:32 am - Reply
Hi Amy! Sunbrella awnings likely have waterproofing or other coatings that can deter HTV from sticking. I’d suggest using EasyWeed® Extra and possibly removing the coating in the application area like I show in this video.
Melissa January 23, 2021 at 6:55 pm - Reply
Can I use my heat press and htv on Merino wool socks. They are made up of 63% Merino Wool 35% Nylon 2% Lycra Spandex.
Lily January 28, 2021 at 8:47 am - Reply
Hi Melissa! HTV can be used on socks, but I’d recommend EasyWeed® Extra for yours specifically because of the nylon content. Regular EasyWeed® will not adhere to nylon blends.
Ardelle January 29, 2021 at 2:36 pm - Reply
Have you tried to press any Siser on 100% Polyvinyl Chloride? Boat/skid-oo seats? Would be outdoors all season. What product would work best for longivity and quality?
Lily January 29, 2021 at 3:27 pm - Reply
Hi Ardelle! Siser® Heat Transfer Vinyl isn’t made to withstand consistent exposure to outdoor elements so it’s more likely to crack or fade. I’d suggest using EasyPSV® Permanent instead.
Tracie Messimore February 5, 2021 at 3:53 am - Reply
I have someone wanting logos on mma shorts.. The shorts are Black 80 polyester 20 spandex.. Whats the best thing to use for this..
Lily February 5, 2021 at 9:25 am - Reply
Hi Tracie! Since the shorts contain spandex, I’d suggest EasyWeed® Stretch.
Tracie Messimore February 5, 2021 at 1:24 pm - Reply
Do u recommend heat setting an time!!! I have one shot at this!!! I don’t have backups!! Really domt want to mess them up bc they cost 70.00 lol thanks
Lily February 8, 2021 at 12:29 pm - Reply
Hi Tracie! I’d suggest 270°F for 20 seconds total. If you want to be extra careful about it, you can press in 5 second increments.
Stacy February 9, 2021 at 2:14 pm - Reply
Hi! Can easyweed HTV be applied to a 100% acrylic knitted blanket? If so, what temp and how long? Thanks!
Lily February 9, 2021 at 3:29 pm - Reply
Hi Stacy! Yes, HTV can be applied to acrylic yarn. I’d suggest using a lower temperature: 270°F (about 2 settings below cotton on a home iron) for 15-20 seconds.
Tracie Messimore February 9, 2021 at 10:24 pm - Reply
Im sorry to keep askin questions but will the vinyl be heavy?? Also would it be the same time an temp for 90% polyester an 10% spandex? Im asking bc i did a test on 90/10 an everything was fine.. Did it at 350 for 15 seconds…
Lily February 10, 2021 at 8:23 am - Reply
Hi Tracie! The weight of the vinyl will depend on which type of HTV you use. For example: anything from the EasyWeed® family is going to be lightweight while thicker HTVs such as Brick® 600, Holographic, Glitter, etc. will be heavier. If your test press was successful with the higher temperature then you do not need to use the lower temp application method. However, the highest we usually recommend applying Siser HTV is 320°F so 350°F is actually more than enough and may lead to overheating the HTV which could cause it to become more brittle and more likely to crack.
Tina M Lunau Magnuson February 27, 2021 at 7:56 pm - Reply
What do you suggest for the best HTV Vinyl for a satin sash? (I know there are different Siser types.)
Lily March 1, 2021 at 8:13 am - Reply
Hi Tina! Most Siser® HTV can be applied to satin. We used Metal in this video on a satin silk robe and eye mask and Holographic on a satin ribbon in this video.
Ashley March 1, 2021 at 2:55 pm - Reply
Hi there! I am hoping to apply HTV to polyvinyl acetate cool rags (like Frogg Togg, chilly pad style) for my daughter’s softball team. What type of HTV and heat temp/setting would work best? Thank you for any assistance you can provide!!
Lily March 2, 2021 at 9:47 am - Reply
Hi Ashley! There’s a wide variety of cooling towels, so to be safe I would suggest test pressing one of the towels to check if you need to use the lower temperature application method and see if the HTV will stick before going forward with the full project.
Erin March 11, 2021 at 9:14 pm - Reply
I have a 100% polyester black apron that says 212° iron at most. Can I use any vinyl one it? What kind? And what settings? It’s just letters and an icon. I would use the easypress 2.
Lily March 15, 2021 at 8:25 am - Reply
Hi Erin! It may still be possible to use HTV, however you’ll need to press for almost a minute to make up for the low temperature. Since you’re using an EasyPress, I would suggest checking out this blog post and using the following settings- Temp: 242F and Time: 50-55 seconds. A lower pressing temperature and higher pressing time works for all Siser® HTV. If the vinyl doesn’t stick then the apron may be coated with waterproof/stain resistant/etc. and will need EasyWeed® Extra to adhere.
Ron lavish March 13, 2021 at 2:06 pm - Reply
I’m trying to press some swimsuits up, the blend is spandex/nylon not sure of the specific %’s. Would easyweed extra be the best option for this project?
Lily March 15, 2021 at 8:37 am - Reply
Hi Ron! Yes, EasyWeed® Extra will be your best option for spandex/nylon blend swimsuits.
Jay March 26, 2021 at 12:01 pm - Reply
Lily.. you are awesome btw! just wanted to give you props and show appreciation for all of your thorough, helpful and professional replies. Extremely helpful! You are appreciated!
Rose April 3, 2021 at 8:04 pm - Reply
I’ve been asked to put a name on a garment bag type of material so water resistant (coated). I haven’t found siser easy weed extra in glitter. So I was thinking I could create the name with with an offset as the background. I can use the siser extra on that and then use regular glitter on top, would that work since it’s adhering the other siser instead of the bag?
Lily April 5, 2021 at 8:14 am - Reply
Hi Rose! EasyWeed® Extra only comes in limited colors with a semi-gloss finish. If the garment bag is not going to be washed, then you should be able to layer the Glitter HTV on top like I did in this video. However, if the garment bag will be washed, I would suggest using Sparkle™ HTV instead for a glittery look that can be layered. In either case, EasyWeed Extra will need to be a solid base layer since Glitter nor Sparkle will stick to nylon on their own.
Susan April 6, 2021 at 4:31 pm - Reply
I have a pair of shorts that i need to put HTV on. They are 96% Nylonand 4%spandex. What Siser HTV should I use?
Lily April 7, 2021 at 8:10 am - Reply
Hi Susan! If the shorts aren’t form fitting then EasyWeed® Extra would be the best option due to the nylon content in the fabric. However, if the shorts are form fitting then I’d suggest using EasyWeed® Stretch.
Joanna May 24, 2021 at 5:47 am - Reply
Hi Lily, which vinyl would work best on fabric that is 86% nylon and 14% elastane? Would it be p.s. stretch to work well with the elastane and stretch of the fabric? Or would it need to be p.s. extra for the nylon? Or another vinyl type all together?
Lily May 24, 2021 at 8:45 am - Reply
HI Joanna! If the garment is form fitting then I’d suggest EasyWeed® Stretch. If not, then it would be best to use EasyWeed Extra based on the nylon content.
Ryen Schilmiller April 9, 2021 at 4:52 pm - Reply
I have a sweatshirt that is made of 22% recycled polyester and 78% polyester. Will easyweed work?
Lily April 12, 2021 at 11:16 am - Reply
For sure! :)
Lisa Kennell April 24, 2021 at 11:32 am - Reply
Can I use HTV on a 50% polyester/ 50% polyurethane blend?
Lily April 27, 2021 at 8:21 am - Reply
Hi Lisa! Yes, HTV can be applied to polyester/polyurethane blends but you will likely need to use the lower temperature application method as shown in this blog post for best results on faux leather (AKA polyurethane.)
Brandy Robinson May 17, 2021 at 10:39 pm - Reply
Hello!
I am trying to find out if I can Heat Press my business logo onto a brand new canopy tent, I just bought. It says it’s “Fire Retardant”. I don’t want to burn my house down! Lol. But all of the warnings about too much heat can possibly catch it on fire, is making me nervous! Do you know? I have a Cricut machine.Lily May 18, 2021 at 3:11 pm - Reply
Hi Brandy! If the fabric is “flame retardant” then it will resist catching on fire. I would suggest test pressing on a small, inconspicuous area (usually the back or inside out) to be sure the HTV is going to stick and the fabric can handle the heat before attempting the full business logo.
Lisa Hansen May 18, 2021 at 4:02 pm - Reply
What is the best type of vinyl for 100% polyester jackets?
Lily May 19, 2021 at 4:22 pm - Reply
Hi Lisa! Any Siser® HTV will work on 100% polyester so it’s really up to your personal preference.
Ashley June 2, 2021 at 11:00 pm - Reply
Hi Lily! I am using a shirt that is 60% Pima Cotton/40% recycled polyester. Is there a specific HTV I should use? As well as a heat/time for transferring? Thank you
Beth Harmon May 26, 2021 at 3:57 am - Reply
Hi Lilly,
Thank you so much for sharing the best knowledge about heat sensitive material. I amusing that technique after that.Best
HarmonStephanie Guess June 11, 2021 at 10:16 am - Reply
Hello,
I have a boat project I’m working on and would love to add some graphics to our sails. The sails are made from dacron. Would this work on them?
Lily June 11, 2021 at 12:10 pm - Reply
Hi Stephanie! Yes, you can apply Siser® Heat Transfer Vinyl to dacron sail cloth.
Connie June 22, 2021 at 10:42 am - Reply
I’m applying siser metal to a 95% rayon/5% spandex tank top. Say line dry or cool iron. If I lower the temp will the metal still adhere ok?
Connie Evans June 26, 2021 at 11:39 pm - Reply
I have looked through all these comments above in hopes to find an answer but no luck. I’m trying to apply
Easyweed HTV to 65% Polyester and 35% Cotton technician work shirts. Some letters are sticking well and others are lifting whether I try cool, warm or hot peels. What settings are recommended for this material?Lily June 28, 2021 at 8:09 am - Reply
Hi Connie! Cotton/poly blends usually don’t require any setting adjustments for application. The standard for EasyWeed® is 305°F with medium pressure for 10-15 seconds. It sounds like there may possibly be a pressure problem (usually fixed with a heat transfer pillow) or cold spots on your heat press. You can check for cold spots with a digital thermometer gun. If you need further troubleshooting help, please email us at Support@SiserNA.com.
Brooke July 7, 2021 at 4:23 pm - Reply
Hello I have a tank that is 100% polyester tag says tumble dry low cool iorn if needed and it is Red . What settings and will htv be ok ?
Lily July 8, 2021 at 8:16 am - Reply
Hi Brooke! If you don’t have an extra tank top to test press then I’d suggest erring on the side of caution and applying with the lower temperature application method: 270°F for 15-20 seconds with the pressure suggested for the type of HTV you’re using. You may want to check out this video with 5 tips for working with heat sensitive fabrics.
Lynda Drouin July 9, 2021 at 12:54 pm - Reply
How can I put any kind of transfer on a vinyl bag?
NENA July 16, 2021 at 3:57 am - Reply
hello,
I have a customer wanting custom chiffon/silk beach coverups for her bridal party.
Any recommendations on which htv and iron settings? I have the cricut heat press.Lily July 19, 2021 at 8:39 am - Reply
Hi there! I’d suggest reading through the tips in this blog post (there’s a video at the end as well!) before applying HTV on chiffon/silk. You may also want to check out this blog post about applying Siser® HTV with the Cricut EasyPress.
Tonya August 2, 2021 at 10:58 pm - Reply
Hi can you apply HTV to wicket material? The material they use for fishing shirts
Lily August 3, 2021 at 8:30 am - Reply
Hi Tonya! Yes, you can apply HTV to wicking materials like they use for fishing shirts. If the the fabric contains spandex, I’d suggest using EasyWeed® Stretch for best results.
Tonya August 3, 2021 at 11:04 am - Reply
Thank you !!
Rosemary August 7, 2021 at 12:34 am - Reply
Hi!
I have some swimsuit bags that have a 100% polyester outside with a PEVA liner. What would be the best vinyl to use for personalization? I have a Cricut Heat Press; if I were able to use a HTV, what temp/time would you suggest? Thank you, RosemaryLily August 9, 2021 at 8:47 am - Reply
Hi Rosemary! You can use whichever HTV you prefer on the 100% polyester outside, however due to the PEVA liner I would suggest separating the 2 sides by placing a heat transfer pillow or cover sheet inside so if the lining does melt slightly you can still separate the linings. When working with a Cricut EasyPress, we suggest adding 30°F to the Heat Press temperature, but leaving the time and pressure the same. You can read more tips for the Cricut EasyPress and an example of the setting adjustment needed for it in this blog post.
Art August 9, 2021 at 3:28 am - Reply
Hello Lily,
I am working a job for a client with crop tank tops (92.5 cottons 7.5 spandex) that I am applying brick HTV. Is there a recommended temp for applying the brick, as I find myself burning the shirts at 310 and 280 degrees.
Lily August 9, 2021 at 8:57 am - Reply
Hi Art! Brick 600 is recommended to be applied at 311°F for 20 seconds with medium pressure (and a cold peel carrier.) The lowest we typically recommend applying Siser® HTV is 270°F for 15-20 seconds, but you can go even lower if you keep increasing the pressing time. For example: 260°F for 20-25 seconds, 250°F for 25-30 seconds, etc. If the garments are still discoloring from the heat at these temperatures, you may need to look into alternative blanks or try to heat press the entire garment essentially turning the “discolor” into the color of the whole garment.
Kris Green September 1, 2021 at 1:52 pm - Reply
Hello, we have a pop up tent for our school and I’d like to add a name to it. The tent canopy is made from fire-retardant, water-resistant, UV 50+ 400-denier polyester. What is the best product to use and the best application process?
Lily September 2, 2021 at 9:13 am - Reply
Hi Kris! Since the polyester is coated I’d suggest using EasyWeed Extra. Most polyester will be fine with the standard application settings, but if you prefer to err on the side of caution then you can use the lower temperature application method (270°-280° for 15-20 seconds) just to be safe.
Kay September 1, 2021 at 7:24 pm - Reply
Hi Lily, I came across a video “why your HTV” is peeling, I’m using an easy press and thought I was pressing at the recommended settings but I overlooked that I need to add a further 30 degrees (305 + 30 for 335F), but even then she said it looked like it would peel, why is this? How can I stop the htv peeling? Also is Easyweed extra suitable to use on 100% ringspun cotton t-shirts, as I would like to stick to one material instead of getting regular easy weed and extra etc. Also easyweed extra is thinner at 85 microns right? Is there anything wrong with using this to print t-shirts and hoodies?
Lily September 2, 2021 at 9:24 am - Reply
Hi Kay! Even with the proper temperature, pressure is still a key factor in applying HTV and the most common culprit of peeling issues. Since EasyPress pressure is self-regulated there’s more room for human error making EasyPress applications less reliable than Heat Press applications. This blog post has tips on getting the best press when using Cricut EasyPresses with Siser® HTV.
As for your other questions: EasyWeed® Extra can be applied to 100% cotton, but it is not as cost effective as standard EasyWeed (because Extra is designed to stick to nylon and coated fabrics it is a little more valuable) nor does it come in as many colors. EasyWeed Extra and EasyWeed are the same thickness at 90 microns. If you’re looking for something even thinner, then I’d suggest EasyWeed Stretch which is 85 microns.
Kay September 3, 2021 at 5:59 pm - Reply
Hi Lily thanks for your reply, I have one more question. Which material would be best for a body warmer that is water repellent and wind resistant, made of 96% polyester/4% elastane? Would I be able to use flock pro on this? which would be better otherwise easyweed or easyweed extra?
Ashley September 7, 2021 at 7:34 pm - Reply
Hi, just curious if you are using Siser EasyWeed or Siser Stretch in this video?
Lily September 8, 2021 at 8:38 am - Reply
Hi Ashley- thanks for reading the Siser Blog! In the video, I used EasyWeed® for the Knockout Boxing logo on the tank top.
Peggy Donald September 14, 2021 at 12:32 pm - Reply
I purchased an outside tent canopy for our school. The material description is: CPAI-84 FIRE RETARDANT CERTIFIED 500 DENIER POLYESTER PU COATED TO BLOCK 99% OF UV RAYS. They would like the school name put on the canopy. Is there an HTV product that would work?
Lily September 14, 2021 at 3:34 pm - Reply
Hi Peggy! I’d suggest using EasyWeed® Extra for coated polyester fabrics.
Kelly moore September 25, 2021 at 12:58 am - Reply
Hi I have a car cover to go over a car that has been restored and the cover is made out of silk with a cotton backing. I’m just wondering what type of HTV I can use and how long it would need to be pressed
Lily September 27, 2021 at 8:45 am - Reply
Hi Kelly! You can use whichever HTV you prefer, but for simplicity’s sake I’d suggest something from the EasyWeed ® family. For application settings, if you’re able to test press an inconspicuous area of the cover with the standard settings for the HTV you choose, that would be best to see how the fabric reacts to the heat. If you can’t test it then I’d recommend erring on the side of caution and use the low temp application method (270-280°F for 15-20 seconds) just to be safe. I applied HTV on satin in this blog post, but the tips will also apply for silk.
LaRon October 5, 2021 at 9:10 am - Reply
Hello. I have a leotard that is 92% micro nylon and 8% spandex. Will I be able to use electric vinyl?
Lily October 6, 2021 at 8:51 am - Reply
Hi LaRon! You can use EasyWeed® Electric, however it may not last as long as EasyWeed® Extra or stretch with the garment as well as EasyWeed® Stretch would so I would suggest considering either of thos products as well.
Ashley October 10, 2021 at 11:38 pm - Reply
Would it be possible to apply HTV to a sequined surface? Thanks in advance for any help you can provide! (Also, sorry if this posts twice!)
Lily October 11, 2021 at 9:52 am - Reply
Hi Ashley! Not all sequins can be heat applied so I would suggest test pressing the sequined surface before decorating it with HTV.
Rachel November 4, 2021 at 8:52 pm - Reply
Greetings, Lily! I have purchased a couple of throw pillow covers that are a Velvet type upholstery fabric. I would love to use Easyweed HTV to put a design on them as a house warming gift. Is this a wise decision or should I paint them instead?
Lily November 5, 2021 at 8:58 am - Reply
Hi Rachel! You can use Siser HTV on velvet. I decorated some velvet drawstring bags in this blog post. I’d suggest test pressing a back corner if possible to ensure your velvet isn’t heat sensitive. If it doesn’t discolor then you can use the standard application settings. If it is heat sensitive, you can use the lower temperature application method (280°F, medium pressure, 15-20 seconds)
Sharon November 7, 2021 at 9:46 pm - Reply
Can you use easyweed stretch on a shirt that is 91% polyester and 9% spandex? It also states it is anti-microbial.
Lily November 8, 2021 at 8:53 am - Reply
EasyWeed® Stretch can definitely go on a poly/spandex blend shirt, however the anti-microbial coatings may interfere with the adhesive’s bond so I’d suggest test applying a small piece of the HTV first to ensure it sticks.
Jeff L December 3, 2021 at 12:39 am - Reply
Hello,
Can I use easyweed for 100% polyester jacket or do I need to use extra?Thanks
Lily December 3, 2021 at 8:37 am - Reply
Hi Jeff! You can use regular EasyWeed® on 100% polyester. EasyWeed® Extra is for nylon, nylon blends, and coated fabrics.
Debbie December 7, 2021 at 4:04 pm - Reply
I have a garden tool holder that is linen backed with polyethylene. Can you use htv on this and if so, what temperature/time would you need to use? Thank you
Lily December 8, 2021 at 9:41 am - Reply
Hi Debbie! You can apply HTV on the linen side, but Polyethylene is a type of plastic so that side of the tool holder will be heat sensitive and may melt. I’d suggest using the lower temperature application method (270°F for 15-20 seconds.) You may also want to place a non-stick cover sheet or piece of parchment paper between the polyethylene so it doesn’t stick to itself or another surface.
Ginger December 16, 2021 at 1:36 am - Reply
I want to apply the Easyweed HTV to thin sweatpants that are 74% cotton, 17% polyester and 9% silver. I do not know what the silver is, but the pants are a charcoal gray with tiny silver specks. The care tag says: Machine wash cold, Do not use fabric softener, Tumble dry low, Do not iron. Do you think this lower temperature will work? I have an Easy Press II. How long at the lower temperature? Should the pants be washed first?
THANKS!Lily December 16, 2021 at 8:38 am - Reply
Hi Ginger! The care tag saying “do not iron” is a sign that the fabric is likely heat sensitive. I’d recommend test pressing a small, inconspicuous area of the garment to see how it reacts to the heat. For more info on test pressing, watch this video. For your EasyPress, I’d suggest 305°F and pressing for 15-20 seconds. And the pants do not need to be pre-washed. Good luck with your project!
Ginger December 17, 2021 at 1:41 am - Reply
Thanks Lily. I watched the video and decided to try 285 degrees and pressed for 25 seconds. The carrier sheet peeled off fine and the pants look great. Do you think that was enough time for pressing? How do you know the HTV has processed enough to not peel off in the wash?
THANKS!
Tracie January 23, 2022 at 11:37 am - Reply
What’s the recommended htv and settings for a t-shirt that’s 95% rayon and 5% spandex? Would I need the stretch or would regular htv work?
Lily January 24, 2022 at 9:52 am - Reply
Hi Tracie! I’d suggest using EasyWeed® Stretch for best results, but regular EasyWeed® would work as well. Sometimes rayon can be heat sensitive, so if you can’t test press the garment I’d suggest using the Lower Temperature Application Method: 270°F, 15-20 seconds, with the recommended pressure for the type of HTV you choose (Stretch needs Firm pressure while EasyWeed® needs Medium.)
Maritza Galindo February 1, 2022 at 12:17 pm - Reply
Hello! Can you help me figure out which material to use on 76% polyester 24% spandex leggings that a customer wants HTV on? They say cool iron only.
Lily February 1, 2022 at 1:24 pm - Reply
Hi Maritza! I’d suggest using EasyWeed® Stretch for spandex blend leggings. Sounds like “cool iron only” could indicate heat sensitivity, so I’d suggest pressing at 270°F for 20-25 seconds with firm pressure for best results.
Ashley February 7, 2022 at 3:36 pm - Reply
Hi-If I have to put iron-on onto 92/8 polyester/spandex wicking pinhole mesh, what would be the best iron on to use?
Lily February 8, 2022 at 8:54 am - Reply
Hi Ashley! I’d suggest using EasyWeed® or Stretch for a poly/spandex mesh jersey. Check out this blog post or this video for more info on decorating mesh jerseys.
Jen February 8, 2022 at 5:19 pm - Reply
Hi – someone asked if I can use vinyl on lame fabric and I’m not sure what the best to use would be?
Thank you for your help!Lily February 9, 2022 at 8:50 am - Reply
Hi Jen! You can use virtually any HTV, it just depends on what kind of style you’re going for. I’d highly suggest test pressing the fabric if possible to see how it handles the heat, but more than likely you’ll need to use the low temp application method: 270°F for 15-20 seconds.
JENNIFER R ALDERMAN February 10, 2022 at 12:52 pm - Reply
Im wondering about using a htv on an Aqualon boat cover material. It’s a 2-ply polyester duck double coated with a pigmented vinyl resin topcoat.
Lily February 11, 2022 at 8:46 am - Reply
Hi Jennifer! Due to the coatings, you’ll likely need to use EasyWeed® Extra. I’d suggest using the lower temperature application method: 270°F for 15-20 seconds and testing an inconspicuous area first before pressing the full project.
Isabel Nuno February 28, 2022 at 4:58 pm - Reply
Hi Lily, I have an issue that I’m hoping you could help me with. I bought an apron for my son as a gift to him and would like to personalize it with HTV. The problem that I came across is that the apron is made out of heavy duty PVC Fabric. I tried to iron on the HTV but it was not adhering to the material. It seem like the glue was just melting and not sticking to the apron. Please help! Thank you!
Lily March 1, 2022 at 9:28 am - Reply
Hi Isabel! Applying HTV on PVC can be tricky since it is so heat sensitive. I’d suggest using a Heat Pres if possible so you can apply even pressure and set it to 230-240°F and press for 1-5 seconds until the HTV sticks and the carrier can be peeled away.
Janelle Reza April 24, 2022 at 10:08 am - Reply
Gratings! What about ribbed material ? I have a top and leggings, it’s spandex and ribbed. I feel like that 2 strikes for the material. Or is it possible with siser easyweed stretch?
Lily April 25, 2022 at 8:55 am - Reply
Hi Janelle! I would definitely use EasyWeed® Stretch if possible. Ribbed spandex can be a a tricky fabric like you pointed out, but if you use a heat transfer pillow to stretch out the ribbing a little then you can push the HTV’s adhesive into the crevices a bit.
Cali May 23, 2022 at 2:48 pm - Reply
I have a bucket hat that I would like to put a vinyl decal on. The exact type of material isn’t identified. The label only says made in Bangladesh. And that it is moisture wicking. What type of Siser vinyl should I use? And what application time and heat? Thanks!
Lily May 24, 2022 at 9:42 am - Reply
Hi Cali! If you’re not sure how the fabric will handle the heat and you only have 1 shot at decorating the hat, I’d use the lower temp method just to be safe- 280°F for 15-20 seconds. Bucket hats are usually made of cotton so you can pick whichever HTV you prefer. However, if you think the bucket hat looks like it’s made of nylon then you’ll need to use EasyWeed® Extra.
Susan Griffo May 31, 2022 at 7:53 pm - Reply
Hi. I’m trying this again because I somehow posted in the 2017 postings! Any suggestions for putting htv on a life jacket/ personal flotation device?
Thank you!Lily June 1, 2022 at 9:27 am - Reply
Hi Susan! HTV can stick to neoprene, but I would suggest using the lower temp method (260-270°F for 15-20 seconds) and be careful with your pressure to avoid compressing the foam. This quick video shows how we decorated a child’s life jacket with HTV and our Craft Heat Press.
Camryn July 15, 2022 at 11:35 am - Reply
Hi lily! I am new to HTV
I want to press a 96% rayon/viscose, 4% spandex/elastane shirt
Cool iron
I purchased Siser HTV STRETCH
Any recommendations? Of course a choose a different material for my first press lolLily July 15, 2022 at 5:04 pm - Reply
Hi Camryn, welcome to the wide world of HTV! I would highly suggest using the lower temperature method (280°F for 20-25 seconds) with very firm pressure on the Stretch and parchment paper as your cover sheet. If you’re using an EasyPress as your heat source, please remember to add an additional 30°F to the setting for best results. This blog post goes into more detail about working with Siser HTV and an EasyPress.
Barbara Bissett July 20, 2022 at 8:41 am - Reply
I have a material that is 50% acrylic and 50% polyester. At what temp and how long do I press Siser stretch HTV?
Lily July 20, 2022 at 10:18 am - Reply
Hi Barbara! With acrylic and polyester it’s possible that the material is heat sensitive. If you’re able to test press a small part of the material to see how it reacts to the standard settings of 320°F, 20 seconds, firm pressure that would be your best option because the material may not be heat sensitive at all and this test will let you know if you can stick with the typical settings or if you need to use the low temp method: 280°F for 25-30 seconds with firm pressure.
khushi August 2, 2022 at 5:30 am - Reply
This piece of information is very good, your thought process while writing is excellent on this topic. Thanks for sharing with us.
Baby D August 3, 2022 at 6:34 am - Reply
Hi, I have a question. Need some help please. my underwear garmet is made of 78% polyamide, & 23% elastane, am I able to use red twinkle HTV, or white easyweed, or either one? They are both Siser brand. Thank you very much .
Lily August 3, 2022 at 10:09 am - Reply
Hi there! Polyamide is fancy word for nylon so you’ll need to use EasyWeed® Extra for the HTV to stick. You can layer EasyWeed or Twinkle on top of EasyWeed Extra.
yashma August 6, 2022 at 6:50 am - Reply
Thanks for giving me grateful information. I think this is very important to me. Your post is quite different. That’s why I regularly visit your site.
Anne Marie H August 7, 2022 at 5:23 pm - Reply
I bought 13 12″×18″ Betsy Ross 13 Stars & Stripes stick flags to make a yard display on 8/26 in memory of the 13 Service Members killed in Kabul, Afghanistan, but the flags are hopelessly creased… I tried hanging them soaking wet on a pants hanger but when they dried, the same wrinkles reappeared. I’ve never been a great iron-er, so I’m glad I came across this post. I will have to find my iron to try ironing them on the coolest setting. Too bad they’re fastened to the sticks or I could have sprayed them with wrinkle releaser & fluffed them in the dryer… wish me luck! If they turn dark, I guess it will just make them look antique, which isn’t a stretch for Betsy Ross Flags, right?!?
ALI August 25, 2022 at 1:30 am - Reply
Thank you for sharing this wonderful article for us. about sensitive textiles That is very helpful
Regards,
ALIAmanda August 31, 2022 at 4:37 am - Reply
Thank you for sharing This is a Masterpiece Article. Its very Helpful
Tessa September 13, 2022 at 10:49 am - Reply
Hello!! I am wanting to put names on the back of my sons football teams jerseys that are 100% polyester.
Can I use siser easy weed MATTE? If so, what heat temp and time would you recommend?
Thank you
Lily September 13, 2022 at 4:15 pm - Reply
Hi Tessa! Yes, you can use EasyWeed® Matte for polyester football jerseys. I’d suggest test pressing a jersey to see how it reacts to the typical settings for EasyWeed: 305°F medium pressure, 10-15 seconds. If the material appears to discolor then it is heat sensitive, and I’d suggest using the low temp settings: 270-280°F, medium pressure, 20-25 seconds.
Ishak Ahmed September 27, 2022 at 12:56 am - Reply
Great Blog article for us thank you for sharing an informative article for us.
Karen October 3, 2022 at 4:40 pm - Reply
Will Siser Easy Weed work on a reflective safety vest? The tag says 100% polyester, but is there something that makes it reflective that will affect the HTV adhesion?
Lily October 4, 2022 at 9:04 am - Reply
Hi Karen! I would highly suggest a small test press to see if the HTV will stick as there may be coatings on the reflective material that could prevent HTV from sticking. You may have more success on the non-reflective parts of the vest, but I would still test press a small bit of HTV on the inside of the vest to make sure.
Alisha November 22, 2022 at 4:23 am - Reply
Hi Lily, can i use htv one a polyester doormat? And can i use htv on a foam lightening stick?
I hope to hear from you!Tracy March 20, 2023 at 3:03 pm - Reply
Hey! If I am doing a shirt that’s 100% polyester what type of vinyl do I use? I am needing a printable kind because it’s a colored logo.
Thanks
Tracy
Lily March 21, 2023 at 8:57 am - Reply
Hi Tracy! If the polyester is sublimated, then you will need to use Sublithin® Soft to block dye migration. If the polyester is not sublimated then you can use whichever Digital Media you prefer.
ed June 1, 2023 at 2:05 pm - Reply
Hi Lily: Can Siser Easy weed be applied to 300D Oxford Canopy Material (a 10 x 10 Canopy for tradeshows) I know alot of companies can do sublimination on the canopys. But this is a tent that we already purchased and had no graphics on it.
Lily June 2, 2023 at 9:26 am - Reply
Hi Ed! Yes, EasyWeed® can work on canopy materials, but you may want to use EasyWeed Extra since these types of fabrics can sometimes have coatings (such as waterproofing) that make it hard for standard EasyWeed to stick. EasyWeed Extra is only offered in a few select colors, but you can layer other color of standard EasyWeed on top to achieve the colors you’re looking for.
Joell June 6, 2023 at 4:19 pm - Reply
i am wanting to put a printed logo on a vinyl bar stool seat that people would sit on. what material and can i use a heat press to apply?
Lily June 6, 2023 at 4:59 pm - Reply
Hi Joell! We make a printable adhesive vinyl called EasyPSV® Printable. You could use this product to decorate your seats without heat application. If you want to use HTV, I would suggest ColorPrint Extra as it is made for nylon, coated fabrics, and difficult to print items.
Tiffanye June 12, 2023 at 1:06 pm - Reply
Hello, i am thinking of purchasing a PJ set for my bridesmaids and the materialis made of 65% Rayon, 35% Polyester, can i use heat transfer on these?
Lily June 13, 2023 at 9:04 am - Reply
Yes, you can! I’d suggest testing it out first on an inconspicuous area (or an extra set!) to see if you will need to use the lower temp application method. This video shows how to test fabrics for heat sensitivity.
Heather September 18, 2023 at 2:11 pm - Reply
Hi there i have a question regarding a certain material. I have never used this material before, its TENCEL. What is the temperature and can i use the color print PU on this material??
Lily September 18, 2023 at 2:51 pm - Reply
Hi Heather! Tencel is similar to modal and can be heat sensitive. You can apply Color Print PU, however, I would suggest using the lower temp application method with a lower temp and longer pressing time: 270°F for 20-25 seconds.
Latasha September 26, 2023 at 8:28 am - Reply
Hi. Should I/ Can I apply htv to a vinyl banner or would permanent adhesive vinyl be better for this? Thank you
Gina M November 20, 2023 at 3:58 am - Reply
I have a polyester drawstring swim bag that I would love to personalise for kids Christmas present. I’m just not sure what to use to do this, as it will get wet at the pool/beach some times and the poly fabric is quite thin. Thanks for your recommendations.
Lily November 20, 2023 at 9:20 am - Reply
Hi Gina! If the drawstring bag contains any nylon, then you will want to go with EasyWeed® Extra. If the bag is just polyester, then you can use whatever HTV you prefer.
samantha November 21, 2023 at 4:06 pm - Reply
Can you heat press glitter vinyl onto a 100% polyester 1/4 zip badger item? If so what temp and for how long? Do i have to get a specific vinyl like stretch? Looking for gold glitter and purple vinyl. Please let me know of reccomendations
Lily November 22, 2023 at 8:39 am - Reply
Hi Samantha! Yes, you can apply Glitter to 100% polyester. However, I’d suggest lowering the temp to 270®F and pressing for 20-25 seconds total. For the purple vinyl I would recommend going with our new EasyWeed® EcoStretch. Not only because it’s stretchy but mostly because it applies at even lower temp of 250°F for 10-15 seconds so you can avoid any heat marks on the polyester.
Andrea February 2, 2024 at 11:53 pm - Reply
Hi,
I used White Easyweed Stretch HTV and also Lemon Easyweed Stretch HTV and its on 84% recycled polyester and 16% spandex, they are new balance half zips. The white is staying on but the yellow is coming off and also coming off in the wash. I use a cricut easy press to press it on in place at 130 degrees C for 15 seconds and then I do it on my heat press with a pressing pillow inbetween the half zip at 280 degrees F for 15 seconds. I do a bit less heat so the half zips don’t scorch either. Can you please help of how to make it betterLily February 5, 2024 at 9:11 am - Reply
Hi Andrea! You can re-press the HTV for 5 seconds at a time until re-applied. I would suggest using more pressure with your heat press as EasyWeed Stretch needs firm pressure to apply and it can be difficult to achieve the proper amount of pressure with a Cricut EasyPress.
Andrei March 16, 2024 at 7:48 am - Reply
Hi Lily,
What type of htv do you recommend for leggings, and what set up?
Lily March 18, 2024 at 10:09 am - Reply
Hi Andrei! I’d suggest using EasyWeed® EcoStretch™ on leggings since it will stretch the best with the spandex. You can apply with a home iron or heat press, but either way I’d suggest using a heat transfer pillow so you can apply even pressure across the leggings which can be tricky due to the seams. This blog post is on the older side, but still the right info.