Feed Management on Small Livestock Farms – Livestock and Poultry Environmental Learning Community (2024)

Why Is Feed Management Important?

Nitrogen and phosphorus from agriculture sources can affect water quality. These nutrients are required for plant and animal growth, but too much in agricultural runoff can result in environmental and health concerns. This fact sheet provides some guidelines to help livestock producers, especially those on small farms, reduce nitrogen and phosphorus losses by monitoring and/or changing feeding and management practices. This can result in less waste and ultimately a healthier, cleaner, and safer environment. Wasted feed and wasted nutrients also represent wasted money for the farm.

Nutrient Balance on Small Farms

Nutrient inputs on a farm consist of feed, animals, irrigation water, fertilizer, legume nitrogen, etc. Outputs are meat, milk, animals, crops, and manure. When inputs exceed outputs, losses will be present in feed or barnyard waste, in manure, and in lot runoff, etc. These losses may result in excess nutrient storage in the soil. Nutrients may leach through the soil (nitrate) into ground water or run off the soil surface (phosphorus and nitrogen) and directly transported to surface waters.

Each farm should be seen as a complete system or cycle with inputs, outputs, storage, losses, and recycling all taking place. To illustrate, a 120-cow dairy farm will require 29.2 tons of nitrogen and 2.6 tons of phosphorus per year. Outputs (meat, milk, fiber, etc.) will be 6.9 tons of nitrogen and .8 tons of phosphorus, resulting in 22.3 tons of nitrogen and 1.8 tons of phosphorus for disposal, usually through spreading on available land. Similar calculations can be made for all livestock species. See “Whole Farm Nutrient Balance“…

If nutrients are overfed, or if feeding is mismanaged on an individual farm, this will result in more nutrients to manage in manure or as spoiled feed. While these nutrients can be applied to crop or hay ground to raise feed, it is important to try and keep this recycling loop as balanced as possible to avoid build-up of excess nutrients. Proper animal feeding and management practices can ensure that feed nutrients are not wasted, not overfed, and feed efficiency will be optimized on the farm.

Feeding Management

Feeding a balanced diet, avoiding overfeeding, and providing abundant supplies of cool, clean, and pure water will help to optimize feed and nutrient use on an animal farm. One way to understand nutrient requirements is to imagine a stave barrel. Only when all staves making up the barrel are the same length will water stay in the barrel. If all staves are 3 feet long, all the water will stay in the barrel. However, if one stave is a foot and a half long, then all the water will run out of the barrel to the level of a foot and a half. (See Figure below.)

Feed Management on Small Livestock Farms – Livestock and Poultry Environmental Learning Community (1)

CC2.5 LPELC

That is exactly what is happening with a balanced diet. If all nutrients are in a perfect balance, then there will be no excess and no wastage. It is impossible for all nutrients to be in a perfect balance in commercial or practical diets, but we want to come close to meeting an animal’s nutrient requirements. If the diet is balanced except for one underfed nutrient, then the entire production of the animal will be limited to the level of that “limiting nutrient” and all other nutrients will be wasted.

Overfeeding can be harmful to animals and to the environment. Animals that become overconditioned or obese may be unproductive and at greater risk of health problems. Excess feed is often wasted and may remain in the feeding area, become contaminated, and end up in the manure pile. Water is the most abundant, cheapest, and least understood of all nutrients required for livestock production. Water is of concern whenever it is in short supply or contamination is suspected. If subfreezing temperatures turn water into a frozen nutrient, it will mean trouble for domestic livestock. Distress is often brought on by cold wet winter weather requiring an animal’s digestive system and metabolic processes to function at peak efficiency to convert feedstuffs to energy so that they can remain warm, healthy, and productive.

Conversely, in hot summer weather, water is essential to the animal as well. It serves to cool the animal and works as a solvent or buffer for chemical reactions in the body. When the weather is hot in the summer, an animals’ requirement for water will increase. A lactating dairy cow requires on the average between 15 and 35 gallons of water per day; non-lactating dairy and beef cows require about 15 gallons per day; an adult horse will consume up to 15 gallons per day, which will increase 2 to 3 times when exercising; an adult sheep between 1 ½ and 3 gallons a day; adult swine from 3 to 5 gallons per day; and adult hens about a pint.

A quick rule of thumb is that for every 2 pounds of dry feed intake, an animal should receive one gallon of water. This will vary with stress, weather conditions, heat, cold, disease, productive state, work, exercise, etc., as well as the water and salt content of the feed. Often the first sign that water consumption is inadequate is when animals stop eating. Water is essential to maintain adequate feed consumption.

How does this affect nutrient management?

If we want our animals to reach maximum levels of production, then they will only have optimum feed intake if they receive adequate amounts water. Level of salt in the water or the diet can influence water requirements as can the presence of heavy metals, nitrates, microbes, and algae. Water is not related to runoff or contamination on the farm in the same way that overfeeding or imbalanced diets are, but water influences the ability of animals to use feed. If water is inadequate or contaminated, then animals will use diets less efficiently, eat less, be less productive, and may excrete more nutrients in waste.

How Do I Feed My Livestock to Avoid Waste and Maximize Efficiency?

Check out the list of helpful feed management tips for practical ways to manage feed and nutrients. Some of the topics on the page include:

  • Feed Additives (hormones, antibiotics, and ionophores)
  • How to Incorporate By-Product Feeds
  • Reducing Waste and Managing Variability
  • Animal Health
  • Managing Dietary Nitrogen
  • Managing Dietary Phosphorus

Feeding animals is both an art and a science. It is a science influenced by years of research and it is an art developed by centuries of practical experience. Healthy animals fed balanced diets and provided with abundant supplies of fresh water will be the most productive. These animals will be the most profitable to the farmer and the most efficient users of nutrients.

References

  • National Research Council. 1989, 1994, 1996, 1998, 2001. Nutrient Requirements of Horses, Poultry, Beef, Swine, and Dairy. National Academy Press, Washington, DC.
  • Ralston, S. L. 1993. Analysis of Feeds and Forages for Horses. Rutgers Cooperative Extension. NJAES. Factsheet – FS714.
  • Singer, J. W. and D. L. Lee. 1999. Feed and Forage Testing Labs. Rutgers Cooperative Extension. NJAES. Factsheet – FS935.
  • Williams, C. A. 2004. The Basics of Equine Nutrition. Rutgers Cooperative Extension. NJAES. Factsheet – FS038.©2007 Rutgers, The State University of New Jersey.All rights reserved.
  • Rutgers Cooperative Extension Fact Sheet FS 1064
  • N.J. Agricultural Experiment Station
  • Rutgers, The State University of New Jersey, New Brunswick

Cooperating Agencies

  • Rutgers, The State University of New Jersey, U.S. Department of Agriculture, and County Boards of Chosen Freeholders.
  • Rutgers Cooperative Extension, a unit of Rutgers New Jersey Agricultural Experiment Station, is an equal opportunity program provider and employer. Published: June 2007

Authors: Michael L. Westendorf and Carey A. Williams, Extension Specialists in Animal Sciences, Rutgers, The State University of New Jersey. This article was originally published as Rutgers Cooperative Extension Fact Sheet FS 1064. Updated November 25, 2008.

Feed Management on Small Livestock Farms – Livestock and Poultry Environmental Learning Community (2024)

FAQs

What is the importance of feed and feeding management? ›

Proper animal feeding and management practices can ensure that feed nutrients are not wasted, not overfed, and feed efficiency will be optimized on the farm.

What are the feeding practices for livestock? ›

The five most common ways of feeding domesticated animals are scheduled feeding, limit feeding, full feeding, free-access feeding, and supplemental feeding. Producers must train their animals through routine and gradual adjustments before switching from one feeding method to another.

What are the three categories of livestock feed? ›

We can conveniently classify feeds into three main types: (1) roughages, (2) concentrates, and (3) mixed feeds. Roughages include pasture forages, hays, silages, and byproduct feeds that contain a high percentage of fiber.

How do you manage animal feed? ›

Ration should include palatable and digestible feedstuffs so as to ensure optimum feed intake and maximum nutrient availability. as they may reduce the nutrient availability leading to health disorders, Ration should satisfy the total dry matter requirement of an animal based on weight.

What is poultry feed management? ›

Feed management starts at the time that the chicks or pullets arrive at the poultry house. The feeders and drinkers should be filled and easily accessible to attract the day-old chicks or pullets. To monitor if the feeders.

What are the three factors to consider in feeding farm animals? ›

Overall, the formulation of rations requires careful consideration of the animals' nutritional requirements, feed availability, and cost-effectiveness .

What is the most important nutrient to feed livestock? ›

Water ‐ Water is often over looked but is the most critical component of any ration. It is essential in allowing most of the physiological functions in the body. Water has been a difficult nutrient to determine the actual requirement for many livestock primarily because water is usually provided free of choice.

What is feeding management practices? ›

Feeding Management. Feeding a balanced diet, avoiding overfeeding, and providing abundant supplies of cool, clean, and pure water will help to optimize feed and nutrient use on an animal farm. One way to understand nutrient requirements is to imagine a stave barrel.

What is the best feed for livestock? ›

Grass Hay:

High-quality hays can have 20% protein, and grass hay is the diet foundation for all grazing animals. It is excellent for mixing with high protein feeds to prevent bloating. Wheat hay, for example, has a sweet taste that cattle love.

What are the three types of feeds for poultry? ›

The age of your chickens will play a large part in what type of feed you need. There are three main types: chick starter, grower, and layer feeds.

What is feed for livestock called? ›

"Fodder" refers particularly to foods or forages given to the animals (including plants cut and carried to them), rather than that which they forage for themselves. It includes hay, straw, silage, compressed and pelleted feeds, oils and mixed rations, and sprouted grains and legumes.

Do cows need grain every day? ›

Grain should be fed to cows on a regular daily schedule and must be delivered so each animal gets an equal opportunity to eat.

How do farmers manage livestock? ›

Livestock management

Water, shelter, cleanliness and low-stress handling are all components of basic husbandry. Animals are healthier and more productive when they are hydrated, clean, dry, and handled with minimal stress.

How do we analyze livestock feeds? ›

Feedstuffs can be analyzed using traditional wet chemistry technique or near infrared reflectance spectroscopy (NIR). Samples can be analyzed more quickly, and usually cheaper, using NIR. However, NIR is only useful for feedstuffs and ingredients that have been well characterized using wet chemistry.

How do farmers feed their livestock? ›

Rather than munching on grass or insects, the vast majority of animals on factory farms eat some type of animal feed—a cost-effective mixture of grains, proteins, and antibiotics designed to make them grow as quickly as possible. The ingredients in animal feed don't just matter to the animals' health.

Why is food and feeding important? ›

A well-balanced diet provides all of the: energy you need to keep active throughout the day. nutrients you need for growth and repair, helping you to stay strong and healthy and help to prevent diet-related illness, such as some cancers.

What is the definition of feed management? ›

Feed management or product feed management is the process of sourcing, sorting, cleaning, and enriching product data to improve its appearance on marketing and selling channels.

Why are feeding practices important? ›

Adequate nutrition during infancy and early childhood is essential to ensure the growth, health, and development of children to their full potential.

What is feed efficiency and why is it important? ›

Feed efficiency is defined as the amount of milk produced or the amount of growth per pound/kg of dry matter consumed. In other words, it shows how efficiently the cows are transforming feed into milk. Feed efficiency is an important figure to monitor because it determines your profitability.

Top Articles
Latest Posts
Article information

Author: Maia Crooks Jr

Last Updated:

Views: 5777

Rating: 4.2 / 5 (43 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Maia Crooks Jr

Birthday: 1997-09-21

Address: 93119 Joseph Street, Peggyfurt, NC 11582

Phone: +2983088926881

Job: Principal Design Liaison

Hobby: Web surfing, Skiing, role-playing games, Sketching, Polo, Sewing, Genealogy

Introduction: My name is Maia Crooks Jr, I am a homely, joyous, shiny, successful, hilarious, thoughtful, joyous person who loves writing and wants to share my knowledge and understanding with you.