How Many Lights Should I Put On My Christmas Tree? (2024)

FAQs

Whats a good number of lights for a Christmas tree? ›

“A good rule of thumb is 100 lights for every foot-and-a-half of tree,” according to Lowe's. But Better Homes & Gardens recommends using three 100-light sets for every foot of a tree's height. And Real Simple suggests 100 lights for every foot.

How many lights for a 7-foot Christmas tree? The minimum number of holiday lights is 700, with 1400 lights on the high end.

For a basic look our number one rule is at least 100 bulbs per 1ft of tree – so that would mean a 6ft tree needs a minimum of 600 LEDs. For a fuller look, you can add as many lights as you want but we recommend upwards of 700 for a 6ft tree.

The usual recommendation for fairy lights for a 6ft tree is 250 lights for subtle sparkle, 400 for regular sparkle and 500 for serious sparkle. For a 7ft tree, go with 400, 500 or 600 respectively; for an 8ft, 500, 600 or 800, and so on.

Don't overcrowd your Christmas tree with too many lights. It is not good for the tree and doesn't improve the look. Sometimes – fewer can be much better.

LED Christmas lights are better for most people because they're more efficient and more durable, but if you can't lose the distinctive and traditional look of incandescents for indoor use, we recommend Christmas Lights Etc's Clear Christmas Tree Mini Lights.

A general rule is to use 100 lights for every 1.5 feet of tree. However, if you love lights, you may want to double or even triple that amount.

You need to measure the length and width of your patio space, add those together, and multiply by 2. What is this? That will give you the total perimeter and total length of lights you need. Simple.

For a 6ft tree we recommend 300 bulbs or 15 metres of lights.

Easy answer: Start with at least 100 mini lights per foot of tree plus an extra set of lights to hang inside the tree along the trunk. That's a great place to start as you plan your tree decorations.

Is 300 lights enough for a 6ft tree? ›

For the best coverage on your unlit Christmas tree, about 100 bulbs are recommended for every two feet of tree. If you have a 6 foot artificial Christmas tree, you'll need a string of 300 LEDs to light up your tree perfectly.

BEST VALUE: Light up the upcoming Christmas with warm white led clear wire Christmas lights through 400 counts Joiedomi 140.7 ft (42.9m) LED string lights.

Trees: One 32-foot strand (100 lights) for every 1 1/2 vertical feet of an evergreen tree; or, about 500 to 600 lights for an 8-foot tree.

GE String-A-Long 100-Count 20.6-ft Clear Incandescent Plug-In Christmas String Lights.

If Christmas lights are left on for too long, they can get hot and become a fire hazard. For this reason, turn your lights off when you go to sleep or leave your home, says Sharon Cooksey, fire safety educator at Kidde.

To make a tree look well-lit (but not over the top), you need about 100 lights per foot: A 6-foot tree requires 600 lights, a 7-foot tree should have 700, and so on.

Plug in the lights to make sure all the bulbs are working. Starting at the top of the tree, intertwine the lights on top of and under branches. Work your way down and around the tree, hanging lights in the back as well. When you reach the bottom, hide any extra lights behind the tree.

Don't lean far over on the ladder to add additional light clips or to attach lights. Better to use caution than to have the entire latter tip over with you on it. Don't try to untangle extension cords while you are on the ladder.

6ft tree – 480 lights. 7ft tree – 720 lights. 8ft tree – 960 lights. 9-10ft tree – 1500 lights.

"Put your hands inside the tree and start fluffing from the inside, working your way out to make sure you do every branch," says Annie. "I make sure that I actually bend every single branch in a different direction so it looks natural and like a real tree," she adds.

What should be on top of a Christmas tree? ›

A tree-topper or treetopper is a decorative ornament placed on the top (or "crown") of a Christmas tree. Tree-toppers can take any form, though the most common include a star (representing the Star of Bethlehem), finial, angel ("Christmas angel"), or fairy.

How to String Lights on a Christmas Tree. When hanging Christmas tree lights on a tree, you should plan on using 100 lights for every foot of your tree's height. So for a six-foot tree, you'll need about 600 lights.

Be sure to purchase enough yardage with plenty of extra space for slack. Remember, string lights are normally draped – the cables will not be pulled taut. Allow at least 12-inches of extra cable per strand.

We suggest starting with about 300 C7 or C9 bulbs in either form of light strings for a 20 foot tree to start with. Ultimately, you'll have to gauge the weigh the width of your tree and how tight you will wind your spiral to determine a beginning estimate for your project.

The most popular LED Christmas light colors are warm white or cool white and the decision for many people simply comes down to preference and color scheme. Cozy and Inviting: Warm White led lights illuminate indoor spaces with a soft glow that is most often associated with traditional mini lights.

Even though LED Christmas lights can cost more than traditional incandescent lights, you get your money's worth. LED tree lights last a lot longer and require less energy to run, so you get your initial investment back quickly from the savings on your power bill.

To give your Christmas tree a professional look, string them a little randomly, to give your lights a more organic, natural feel. As you work, place some lights deeper into the branches and place some closer to the front to create depth.

Easy answer: Start with at least 100 mini lights per foot of tree plus an extra set of lights to hang inside the tree along the trunk.

How many lights do you need to decorate tree? ›

To make a tree look well-lit (but not over the top), you need about 100 lights per foot: A 6-foot tree requires 600 lights, a 7-foot tree should have 700, and so on.

String lights by starting the string at the bottom of the tree and pulling it up to the top, then back down like a mountain. Continue to zigzag up and down the tree. Once you've wrapped the tree, tuck the strands farther in on the branches to make room for ornaments.

Why? Because light strings have a maximum wattage capacity, which is why many string lights come with a little fuse just in case you connect too many together at once. The fuse is designed to blow so you don't overload and damage your Christmas lights.