These DIY glitter ornaments will sparkle on your tree and they are super easy to make. These would be fun for kids to make at holiday parties or to give as gifts.
Glitter ornaments make great holiday gifts and can be personalized with purchased stickers or vinyl applique. Find some other fun holiday crafts for kids to make by clicking the link.
Keep reading or watch the video below to learn how to make these simple glitter ornaments.
COMPLETE VIDEO TUTORIAL AVAILABLE! The video below is a preview with no audio, to watch the whole video tutorial, click the link How to make Glitter Ornaments to watch in Youtube.
Disclaimer: This post may contain affiliate links. We make a small commission on sales through the affiliate links, at no extra cost to you. Thank you in advance for your purchase and your support! Please see our full Affiliate Statement for more information.
WHAT YOU NEED to make diy glitter ornaments:
INSTRUCTIONS FOR GLITTER CHRISTMAS ORNAMENTS
Before starting, cover your table with newspaper or other protection.
STEP 1: Remove ORNAMENT Cap
Remove the cap from the ornament and set aside in a safe place. This will be replaced after the ornament is finished and dry.
Step 2: Add Glue
Add a generous amount of Elmers Clear Glue to the inside of the ornament. You will need enough to coat the inside of the ornament.
Why do we use Elmers Clear glue? In preparing for this tutorial, our first try we used Mod Podge for the glue inside the ornament. Mod Podge usually dries clear. In this case, the mod podge did not seem to dry clear as I could see a white haze on the inside of the ornament even after a week of drying. The Elmers Clear Glue dries clear and looks nicer when finished.
Step 3: SWIRL GLUE AROUND
Hold the ornament in different directions to make the glue cover the whole inside of the ornament. The glue will move slowly around, so be patient! Remember to get all the way to the neck of the ornament.
More glue can be added if necessary. Once the glue is covering the whole inside of the ornament, it will appear completely clear and smooth. Don't worry if there are a few small bubbles.
Step 4: Remove excess glue
Too much glue inside the ornament will cause the glitter to clump up and not cover the inside nicely. Drain any excess glue by placing the ornament upside down in a disposable cup.
Let it drain for a few minutes but not long enough for the glue to dry.
Step 5: Add Glitter
Remove the ornament from the cup and carefully pour a generous amount of glitter inside the ornament. Add enough that it can be swirled around inside the ornament and nicely cover the inside.
Having trouble pouring the glitter into the ornament? Make a small funnel out of a piece of paper and then insert it into the opening of the ornament. Pour the glitter in through the funnel.
Step 6: SWIRL GLITTER around ornament
Carefully swirl the glitter around the inside of the ornament so that it coats the whole inside. Cover the end of the ornament with a folded paper towel so that the glitter does not come out.
The glitter can be gently shaken to cover the inside, or just tilt the ornament in all directions. Add more glitter if needed. Covering the hole at the top will allow the glitter to get near the top of the ornament and not pour out.
Step 7: Remove Extra GLITTER from ornament
Once the inside of the ornament is coated with glitter, dump the extra glitter into a bowl or onto a paper. If it's dumped onto a paper, you can funnel it back into the glitter bottle so it's not wasted.
Step 8: Let Dry and replace the cap
Place the ornament on its side on a table or other safe place to allow it to dry completely.
Once the ornament is dry on the inside, replace the cap so the ornament can be hung on a tree.
Does your DIY glitter ornament have some spots that are not covered by glitter after it dries? This may happen if there was excess glue and/or glitter in an area of the ornament. The glitter can fall off.
To fix this, wait until the glue is completely dry. Once it is dry, carefully add more glue inside targeting the problem area. Swish it around to cover that area. Add more glitter to the problem area and allow it to dry. Placing the wet side facing down on the table should help it dry and the glitter stay in place.
Step 9: Decorate outside of glitter ornament
Decorate the outside of your ornament by adding stickers or vinyl appliques or simply a small ribbon at the top. This can add some personalization to the ornament especially if you are giving it as a gift.
Add stickers of initials, favorite sayings, or favorite items. Some examples are the gift receivers first and last initial, sayings such as Noel, Christmas, Happy Holidays, or favorite items like snowflakes, Santa, cars, trucks, dolls or other items the person enjoys.
If you have a Cricut cutting machine, the possibilities are endless! Make your own personalized Vinyl appliques and stick them to the ornament.
I added some puffy snowflake stickers to my ornaments, but I do not recommend these puffy type stickers. The puffy stickers do not seem to stay stuck to the ornament, so I am not happy with the results.
A simple coordinating ribbon tied in a bow can be glued to the top makes a nice additional decoration to the ornament. The ribbon could also be tied around the top.
The DIY glitter ornament is complete!
We hope you enjoyed this easy craft Holiday craft idea and decide to make some for yourself or as gifts this holiday season.
QUESTIONS?
If you have any questions about this project, contact us through the YouTube Video comments or our Contact Us page. We respond to questions in e-mails and YouTube comments regularly.
Below are some other easy Holiday Crafts you may be interested in.
Mini Felt Christmas Wreath Ornament</p
Easy Mitten Ornament
Snowman Tea Light Ornament
Simple Snowman Ornament
Bead Garland Ornament
Felt Stacked Christmas Tree Ornament - A cute felt Christmas Tree Ornament will add a festive touch to the tree.
Supporting Products and links: Some of the links below may be affiliate links. We make a small commission on sales through the affiliate links, at no extra cost to you. Thank you in advance for your purchase and your support! Please see our full Affiliate Statement for more information.
FAQs
The Adhesives:
- Elmer's Clear School Glue.
- Mod Podge (we used Glossy finish)
- Elmer's Glue-All.
- Aleene's Craft Glaze.
- DuraClear Polyurethane Gloss Varnish.
- Minwax Polycrylic.
- Pledge Floor Gloss.
- Elmer's Glitter Glue.
Yes! You can use one of these two methods for your glitter ornaments: Coat the outside of your glass balls with Mod Podge and sprinkle the glitter on (either the entire ornament or parts like we did). Mix glitter and Mod Podge and swirl around the inside of the ornament.
What liquid do you use to make glitter ornaments? ›
MINWAX POLYCRYLIC – this is the stuff that you will put inside the ornament to get the glitter to stick. You will most likely need to go to a hardware/home improvement store to get this – it's usually in the paint aisle.
Which Mod Podge is best for glitter? ›
If you love the look of sparkle but don't love the glittery mess, try Extreme Glitter Mod Podge. The blingy-ness is built in! It's used in a lot of holiday crafts in addition to day-to-day.
Does Mod Podge make glitter stick? ›
Once the second layer has dried apply another layer of mod podge over the glitter and let it dry. This seals in the glitter so it won't fall off the object while you're using it, and it'll keep its glittery shiny finish if you used the glossy mod podge.
Is glue or Mod Podge better for glitter? ›
Spray over the top of your entire project with a layer of the Mod Podge Ultra. That really makes this the best glue for glitter! It locks it in and it is not going anywhere! I allowed that to dry completely then I added a bit of “grass” with some green glitter using basically the same method as above.
What do you seal glitter with? ›
For sealant options, you can use either glue, mod podge, or glitter sealant spray for the best results. You can also mix some glitter directly into a small amount of glue or mod podge to create your own glitter glues and paints.
Does Mod Podge keep glitter from falling off? ›
Apply a top layer of Mod Podge to seal in the glitter.
You could also use watered down school glue to create an opaque sealant for your crafting project. The top layer of Mod Podge acts as a sealant and will prevent the glitter from flaking away.
Does Mod Podge dry clear on glitter? ›
Add a touch of sparkle to your decoupage projects! Mod Podge Sparkle is a great way to add a fun, festive touch to fashion accessories, jewelry, holiday projects, kids crafts and more. This all-in-one decoupage glue, sealer and finish dries fast and clear, holds tight and protects your creations.
Does Vaseline make glitter stick? ›
Application Trick. If you are applying your chunky festival glitter to the body, Vaseline is said to be the best product for making your glitter stick. Spread the petroleum jelly evenly on the area of the skin, then press the glitter in with your hand or a brush and wait for it to dry.
Aluminum is the material that makes glitter reflective, aka sparkle. And the process by which aluminum is deposited on both sides of the film is called metallization. Afterward, these sheets are cut into the preferred size, fine as dust or chunkier like confetti.
How long do you let Mod Podge dry with glitter? ›
The dry time between applications of Mod Podge Mega Glitter is approximately 20–30 minutes, depending upon the thickness of application and the humidity level of the room.
What is the best glue for putting glitter on glass? ›
Glue: Mod-podge gloss glue works the best for this, however 3 parts of PVA glue mixed with 1 part water also works. There are many varieties of the mod-podge glue, including a dishwasher safe version, so it might be worth doing your research to see which works best for you.
How long does it take for Modge podge and glitter to dry on glass? ›
After pouring on the sparkle, allow your glasses at least two hours to dry completely. If your glitter is really thick, wait overnight. When the glassware is dry, apply a generous coat of Mod Podge Dishwasher Safe Gloss on top of your glitter.
How do you seal glitter decorations? ›
You can use mod podge to apply a thin glossy layer on the glittered areas and leave them to dry. You can also opt for a glitter sealer spray like Krylon`s glaze spray to achieve a quality glossy permanent finish. Glitter produces a sparkly, shiny, magical effect over all kinds of items.
What liquid can I suspend glitter in? ›
Fill the water bottle with vegetable oil, leaving one-half inch free on top. Oil is the secret for glitter to float in the water.
Can I use hairspray to seal glitter on glass? ›
Can I seal the glitter with hairspray? No. If you make this project following the directions for applying the glitter with Dishwasher Safe Mod Podge and sealing the glitter with Dishwasher Safe Mod Podge, the glitter will have permanently adhered to the glass.
How do you harden glitter? ›
Sometimes you may not have the time to wait for your glitter glue project to dry on its own, so you need a method that can help dry glitter glue fast. In that case, you can use a hairdryer, a fan, or the power of the sun to help speed up the drying process.
How do you keep glitter from falling off ornaments? ›
Use clear glue spray, or hair spray to protect
If glitter rubs off a Christmas ornament then stop it from happening by coating it with a thin layer or spray on glue or hairspray. You can use these items to add extra protection and prevent the glitter from rubbing off in the first place.
Do you put top coat on glitter? ›
Glitter polish will feel rough on the nail once dry. To achieve a smooth and shiny look, use a fast dry top coat like KBShimmer Clearly On Top. Some polish may need two coats of top coat for that smooth, glass like finish.
Paint the item you want to cover in a thin, even coat of Mod Podge and shake over your glitter until the item is covered. Leave this to dry completely.
What can I use to seal glitter on glass? ›
Using a Mod Podge
This is also one of the best solutions for sealing glitter on glass without losing sparkle. Materials Needed: Mod Podge – You need enough to cover the entire surface that you are sealing. A foam brush – This will make laying down the mod podge easier while ensuring even coating.
Will a thick layer of Mod Podge dry clear? ›
Let me give you the short answer to the question “does Mod Podge dry clear?”: YES! Mod Podge looks milky in the bottle, but when applied properly, it dries completely clear.
Does Mod Podge turn yellow? ›
Mod Podge Spray Acrylic Sealer That is Specifically Formulated to Seal Craft Projects, Dries Crystal Clear is Non-Yellowing No-Run and Quick Drying, 12 Ounce, Gloss (2 Pack)
Can you use pledge to glitter ornaments? ›
Remove the ornament cap and squirt about a tablespoon of the Pledge into the ornament. Swirl the Pledge around and make sure you get a good even coat over the entire inside of the ornament. Pour any excess Pledge back into the bottle (or discard).
Is polycrylic better than polyurethane? ›
Polyurethane is better for durability, but polycrylic is better for interior surfaces like cabinets, furniture, and trim. However, for light painted furniture and cabinets, polycyrlic is preferred because it doesn't yellow on the surface.
What are the materials used to make an ornament? ›
Shells, wood, glass, plastic, rubber, leather, feathers, bones, paper, pebbles, beads, and so on are all examples of gems. So, as per need we can choose material to make ornaments. Note: Metals such as gold, silver, and others are used to make ornaments because they are exceedingly shiny.
What kind of paper do you use to make glitter? ›
Use any color of all-purpose drawing paper (I like using Tru-Ray Sulphite Paper). Spread a light coating of Mod Podge (or watered down glue) over entire surface with a big brush. Sprinkle loose glitter over the wet paper. Be sure to sprinkle a light coating over the wet surface.
Can I use polyurethane for glitter ornaments? ›
Fill a 30 ml syringe with polyacrylic or polyurethane. Push the syringe into the top of your ornament. Swirl the polyurethane around till fully coasted and tip the plastic ornament upside down on a cup to drain the excess. After about 2 minutes of draining, pour glitter into the ornament with a small funnel.
Can Mod Podge be used as a sealer for glitter? ›
Paint the item you want to cover in a thin, even coat of Mod Podge and shake over your glitter until the item is covered. Leave this to dry completely.
You can grind glitter to make it finer. The process of grinding glitter has been done using a spice or herb grinder. For ultra-fine glitter, you can sift the ground glitter through a mesh screen.
What do you need to make DIY ornaments? ›
All you need for this simple and festive DIY is a few bells, pipe cleans, ribbon, and a hot glue gun. It's quick and easy! Get the tutorial at The Girl Creative. Turn a few twigs from your yard and some popsicle sticks from your freezer into tree ornaments.
Which Mod Podge to use for ornaments? ›
Use decoupage medium to create pretty and fun Mod Podge ornaments – here are over 20 unique ideas. Give them as gifts or hang them on your own Christmas tree! It's that time for decoupage ornaments, my friends!
Does Mod Podge extreme glitter dry clear? ›
What is the finish of Mod Podge Extreme Glitter? It dries with a clear Gloss base and lots of sparkle.
Can you use clear plastic ornaments to make glitter ornaments? ›
The number one question I've been asked since I did my glitter ornament tutorial last year, is “Can I use plastic ornaments instead of glass?” I'm sorry it took so long, but I finally tried it, and they look great!
Remove the cap from the ornament and set aside in a safe place. This will be replaced after the ornament is finished and dry.
Mini Felt Christmas Wreath Ornament</p
Easy Mitten Ornament
Snowman Tea Light Ornament
Simple Snowman Ornament
Bead Garland Ornament
Felt Stacked Christmas Tree Ornament - A cute felt Christmas Tree Ornament will add a festive touch to the tree.
